Question about 2006 Dodge Grand Caravan

Open Question

P0507 code High idle.po507trouble code

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error code P2173 or p0507 mean on 2008 Dodge caliber 2.0L engine


P2173 DODGE - High Air Flow - Vacuum Leak Detected - Slow Accumulation
https://www.autocodes.com/p2173_dodge.html

P0507 - Idle Control System RPM Higher Than Expected
https://www.autocodes.com/p0507.html

Mar 02, 2017 | 2008 Dodge Caliber

2 Answers

Code p0507


possible causes are:

Dirty throttle body
Electric throttle control actuator incorrectly adjusted/faulty/damaged
Air leak on Intake
Poor electrical connection to the Intake Air Control valve

P0507 KIA Idle Air Control IAC System RPM Higher Than Expected

May 14, 2014 | 2003 Kia Sedona

1 Answer

Error codes P0507 and P0102 after replacing MAF sensor


P0102: you need to make sure the sensor is clean; sometimes it get dirty as you are working on an old car. Check the voltage manually. Make sure there is no air leak near it

P0507: high idle... this sounds like a vacuum leak. get starter fluid and start the car. Spray around and check for change in car idle

Dec 09, 2013 | 1998 Pontiac Grand Prix

1 Answer

I have a 2005 Nissan quest and I'm getting a p0507


No..you can't adjust the idle...

Possible cause---Electric throttle control actuator, intake air leak or PVC system...check these 3 things...

Jun 04, 2011 | 2005 Nissan Quest

3 Answers

My nissan is showing this code p0507. What is that mean.


idle controll system idle to high is the code description

Jun 09, 2010 | 2003 Nissan Maxima

3 Answers

My 2005 altima idles high and engine code


This P0507 code is one that's sometimes triggered on vehicles that have electronic throttle control. That is, they don't have a regular throttle cable from the accelerator pedal to the engine. They rely on sensors and electronics to control the throttle. In this case, the P0507 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM. In the case of GM vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set.

Jun 07, 2010 | 2005 Nissan Altima

1 Answer

Engine codes p1133 p0171 p0507 p0131 all at once


Per your description, it sounds like you have a vacuum leak.
Check all vacuum hoses at the engine, make sure no hoses are disconnected, cracked or damaged.
Disconnect each hose at the source on the engine and see if the engine idle stabilizes.
Let me know what you find and we can go from there.
Regards.

Mar 10, 2009 | 2002 Pontiac Sunfire

1 Answer

ERROR CODES


The following are generic OBD II codes so your Sabb may not conform:
P0507=Idle Control System RPM High
P2187=Sys Too Lean at Idle Bank1 

Oct 06, 2008 | 2004 Saab 9-3

3 Answers

Code P0507


P0507-- idle speed high

Jun 02, 2008 | 2001 Chevrolet Impala

Not finding what you are looking for?
2006 Dodge Grand Caravan Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...