Question about Ford Fusion

1 Answer

2008 ford fusion I hear a loud noise in the engine when accelerating

I only hear it after the car has warmed up and it stops after about 5 minutes then starts again

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You may need to check/replace tensioner pulley

Posted on Oct 27, 2014

  • iivanits Oct 27, 2014

    You may need to check/replace tensioner pulley.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 74945 Answers

SOURCE: making a knocking noise

This is most likely either a piston noise or a connecting rod bearing knock

Posted on Oct 21, 2008

  • 1 Answer

SOURCE: Rear acceleration noise

Try rear wheel bearings. The cause a roaring noise that increases with acceleration. Sounds very similar to loud road noise.

Posted on Dec 05, 2008

  • 82 Answers

SOURCE: Loud rattling noise while accelerating

First thing i would try...... ISOHEET, Red bottle..... allows water to be mixed into the fuel and be burnt out of the tank.
get a good qaulity fuel injection cleaner, if you can locate the brand MALCO, i found it quite succesful..... and go with a full tank of premium fuel such as ammoco or shell......do not use yellow bottle of heet

Posted on Jan 22, 2010

Testimonial: "Might be water in the tank?"

kb8dns
  • 494 Answers

SOURCE: 2006 Dodge Gr. Caravan. Loud humming noise upon

Misalignment of the belt, incorrect belt, worn or loose tensioner, Too tight of an adjustment (many service centers do this on purpose so when the belt breaks in it becomes properly adjusted, I do not believe in this philosophy), The belt is actually one long belt called a serpentine belt.....

Posted on Feb 21, 2010

caroldon
  • 17129 Answers

SOURCE: My 2006 2.0 litre turbo volkswagon passat started

You are the bestt person to identtify the source of the sound before we can go about a long check list. so open up the bonnet if you think it is from the engine side. Look for possible noise from
1. water pump
2. Alternator bearings
3. Idler pulley
4.AC clutch pulley
5. Belts..Tip Is: try to pour some water over the belt to confirm
6. main crank pulley
Hope you check this out. Helpful I hope. Good day

Posted on Aug 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Ford Fusion, electronic clicking sound under driver seat when slowing dow, stopping, stopped or upon resuming acceleration.


only the airbag connections under the seat ,but their is also a pressure sensor as well i think last time i cleaned the contacts on the airbag wires mtheir is a pyrotechnic device as well to pull the seat belt in if a collision ,so have a good look to try to see whats causing the noise ,sure you havent a coca cola can rolling around??

Mar 17, 2011 | 2008 Ford Fusion

1 Answer

2006 FORD FUSION 2.3l i get a rapping sound in my engine it starting when i accelerated from a light and got worse with driving sounds like something is rattling around under the valve cover


Does it sound like Metal on metal noise? or like a knocking noise?

If it increases with RPM that means you may have a serious issue.

If your comfortable i'd take off one coil pack at a time and see if the knocking stops. If it stops that cylinder might have Rod Knock..

it could be valve lash, or a valve train tick as well. There are several different things sadly.

Feb 26, 2011 | 2006 Ford Fusion

1 Answer

Belt or pully queeling on 2008 fusion, service has looked at it numerous times, service manager has told us there is nothing wrong. It only happens when you first start up in am . car has done this since...


My Fusion does the same thing! If I dont drive my car for a day it will do it, or if it sits out in the sun for a while the noise is very loud.

Oct 19, 2010 | 2008 Ford Fusion

1 Answer

Noise from engine or transmission cant tell


The sound could also be from the fuel pump. This comes on a cold engine. The way to sort it is to change your driving technique. Do not accelerate too much till the temp gauge starts showing the change. for the first minute or two if you do not accelerate too much then you may not hear the sound the rest of the day. Let the engine/fuel pump warm up a little and then you drive your normal self.

Feb 05, 2010 | 2005 Ford Five Hundred

3 Answers

I just bought a 2008 Sienna w/ 44,000 miles. When the engine is cold, doesn't have to be really cold, I hear this ticking noise (not loud) when engine is under slight acceleration between 1500- 2000 rpm....


Sounds like you are describing lifter noise. Go to the car store and buy a pint of Berrymen's Chemtool. Next time the engine is cold, pour the Chemtool into the engine oil. Do your normal driving for the next few days or weeks until you have 150-200 miles (none of them should be highway miles) on the engine, then have the oil changed. Drive for 2000-3000 miles, and do the same thing all over again. Repeat this a couple of times. If the lifter loosens up, your good to go. If it doesn't, then it will have to be repaired by tearing into the engine.

Dec 16, 2009 | 2008 Toyota Sienna

1 Answer

Recently purchased the 2008 Ford taurus X. I


Take it to another dealer and see if they can figure it out for you. Obviously that dealership is full of idiots that don't have the time for your concerns. I wish I could help you out but, explaining a thumping noise is hard to do if your not there to actually hear it for yourself. I wish you luck and hope it is still under factory warranty.

Aug 14, 2009 | 2008 Ford Taurus X

1 Answer

Slow engine pick up


Yes that is normal, i use to work for ford, the 4 cyl they put in the fusion runs kind of loud and likes to be at higher rpms.

May 04, 2009 | Ford Fusion Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...