Question about 1999 Chevrolet Silverado 1500

1 Answer

Headlights will not go off with switch. when ignition is on, the headlights are on

Posted by on

  • 2 more comments 
  • rick hill
    rick hill Mar 27, 2014

    truck has auto darkness switch that tells the headlights to come on. diagnosed as low power, can it be disengaged so headlight switch works instead of automatic? How can this problem be resolved?

  • Dene Lass Mar 30, 2014

    What yr is it bro?I would google it also.

  • rick hill
    rick hill Mar 31, 2014

    99 chevy silverado 1500 LS

  • Dene Lass Mar 31, 2014

    Did you try putting the e break on?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 26 Answers

Push emergency brake down.

Posted on Mar 30, 2014

Testimonial: "did that and e brake light stays on and chime rings...very annoying"

  • 3 more comments 
  • Dene Lass Mar 31, 2014

    Set your e break and see if they go off.

  • rick hill
    rick hill Apr 01, 2014

    They WILL go off, but when you relese the brake they come back on. CANNOT drive it with e brake on. flashes and chimes.

  • rick hill
    rick hill Apr 01, 2014

    Need to know how to either disable auto lights on sensor or how to replace it

  • Dene Lass Apr 13, 2014

    Its made that way, not hurting anything.

  • Dene Lass Apr 13, 2014

    Plus I have a 98

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to find an electrical disturbance in 1998 ford expedition


Normally this condition is the result of a poor body ground connection. Testing for this can be deceiving. At the static(nothing on) condition, testing can show a good ground. However when a circuit is excited, it has a determined resistance and a set current flow. If the ground connection to this or a branch circuit is loose, corroded, or broken wire. This will allow just enough connection to show as being good, but not good enough to complete the circuit with the required amount of connection when energized.

Nov 30, 2014 | 1998 Ford Expedition

1 Answer

I have no power at all when the key is in , no light in the dash nothing


Do you have headlights with the headlight switch on? That would eliminate a battery connection problem. If things like headlights and brake lights work, one should next check that power is getting to the ignition switch. If you pull the connector under the dash off for the ignition switch, there should be a hot-at-all-times wire going to the ignition switch. Check with a test light or voltmeter. If no power to the switch, back to the fuse box by the battery-an ignition fuse may have blown. If power is available to the switch, suspect a bad ignition switch.

Apr 10, 2014 | 2002 Pontiac Sunfire

1 Answer

1987 toyota pickup lost all electrical except headlights


What works? Just headlights? Does anything electrical work that does not need the ignition switch to be in the on position? Possibly four way flashers, brake lights, horn, interior light, dash lights in instrument panel as well as headlights should all work without the key in the ignition and in the acc or on position. If this is what you have, then I would say you need to replace the ignition switch.
Hope this helps.

Jan 12, 2014 | 1987 Toyota Pickup

1 Answer

Cant find the fuse to the dash lights


The dash lights have to go through the headlight switch and then through the ignition then through a fusible link (wire) underneath the wrapping of the wire bundle leading to the ignition or battery. I recommend starting by removing the headlight switch or turning the dial on it to turn up the dimming. Look behing the headlight switch and look for an overheated melted harness etc. Also test the switch with a multimeter (continuity tester). If that is ok then proceed to the ignition (ignitions usually fail when a car is 10 to 15 years old). if that is ok then look for your fusible link.

Oct 17, 2013 | Pontiac Firebird Cars & Trucks

2 Answers

Headlights on when switch is off but turns off with ignition


Did you fix this problem I am having the same problem with my bipper.

Aug 02, 2013 | 2010 Peugeot Bipper Teepe

1 Answer

Put a new battery, starter, and solenoid on the truck. It still won't crank.


You have a bad fuse or ignition switch. If you turn on the headlights and try to turn ignition do the headlights dimmer? If the do the ignition switch is probably good and you hav a bad or loose wire somewhere, If the headlights don't dim the I would suspect the ignition switch. Let me know if you need more info.

Dec 01, 2010 | 1992 Ford Ranger

1 Answer

After turning ignition, only parking lights work. low beam headlights were replaced recently. parking lights wont even turn off. headlights


I had an S-70 with the same problem what happens is the headlight switch tabs that hol it together broke and the switch was slightly separated and connection was not there for the headlights and also check the high beam see if headlights come on i dont think it is a relay or fuse??? proballally the headlight switch and easy to replace you even can use one from an 850 model

May 17, 2009 | 2001 Volvo S80

1 Answer

1991 honda accord ex headlight problems


Hello, firstly I was wondering if the lights shut off when you pull the switch off the harness?
If YES, then THAT switch or wiring could be bad
if NO, then it's most likely the body control module

Jan 12, 2009 | 1991 Honda Accord

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...