Question about Pontiac Bonneville
I can hear the fan move when I prompt new directions on the panel. For a month I could smack the dashboard and it would turn on, but now it won't blow air at all? Is this a fuse issue maybe?
Fuses don't cause problems
A fuse is like a straight piece of wire,
there to protect the circuit from excess current
If the motor fails to come, on access the plug & power
to it & test using a wiring diagram,then pull the motor
if it fails to work when you put power to it, bypassing the
Posted on Mar 25, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 pt cruiser no heat
did you check the fluid level by removing the rad. cap? Radiator should be full to top. If Chryslers are low on coolant, the heater will not blow warm air.
Posted on Jan 04, 2009
if the fan is blowing this could be a problem with the climate controll switch that changes the direction of air from floor to defrost to vents, some are vacuum controlled through a vacuum operated mechanism that opens and closes a door in the vents which redirects the air to different places.
Posted on Jun 10, 2009
can't help you w/ fuse panel diagram-- but it may be your front blower motor door. sometimes they stick in the closed position. good luck!!
Posted on Jul 07, 2009
I also have a 53 clio with climate control and the fan stopped working. After being quoted £104 by dealership I decided to have a go myself. Bonnet up, remove driverside scuttle cover. Unplug fan resistor 7701051272 (large plug with black wire to fan)remove securing screws and resistor. Dismantled casing and peeled away gel from soldered side of circuit board around mosfet transistor-desolder and remove. Mine was a N342AD 75344G but the nearest I could get was HUF75337P3 from Maplin £1.68. This was the wrong 'package size' but I managed.Close the clamp slightly (before)to hold transistor firmly and then insert transistor and solder. Reassemble. After I got an email from a scrappy QUOTING £20 if you don't fancy the messing about.
Posted on Aug 31, 2009
Tips for a great answer:
May 19, 2017 | 1998 Pontiac Bonneville
Sep 02, 2012 | Cars & Trucks
Feb 27, 2011 | 2002 Buick LeSabre
Jul 15, 2010 | 2003 Chevrolet TrailBlazer
Oct 16, 2009 | Pontiac Bonneville Cars & Trucks
Aug 04, 2009 | 2004 Buick LeSabre
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: