Question about 2002 Isuzu Rodeo
Truck will not start
Lots possible casues. Fuel pump may have failed. Check fuel pressure. A defective crank angle sensor will confuse the computer and cause it not to fire the ignition coils (no spark).
Posted on Dec 13, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try wiggling key around rapidly and up and down while trying to turn on
key and ignition barrel are worn and need replacing
Posted on Jul 02, 2009
SOURCE: 2002 isuzu rodeo won't start
the clutch switch is located on the clutch pedal support, if you put your hand on the clutch pedal run your hand up and the switch will be at the top. now if you are going to replace this switch I would try to adjust the switch first the amount of time it takes and this would confirm that it's the switch. ensure clutch pedal is fully returned, disconnect the electrical connector from the switch. loosen lock nut and tighten clutch switch by hand until switch is firmly against clutch lever. back the switch out 1/2 turn, the switch plunger should extend .02-.06" (.5-1.5 mm).
hope this helps
Posted on Jul 13, 2009
Tips for a great answer:
Nov 10, 2016 | Isuzu Rodeo Cars & Trucks
Oct 30, 2015 | 2002 Isuzu Rodeo
Mar 30, 2013 | 2002 Isuzu Rodeo Sport
Sep 10, 2012 | 2002 Isuzu Rodeo
Jul 09, 2011 | 2002 Isuzu Rodeo
2.2L VIN D engine Firing order: 1-3-4-2 Distributorless ignition system
May 12, 2011 | 2002 Isuzu Rodeo
Dec 28, 2010 | 2002 Isuzu Rodeo
Nov 29, 2009 | 2002 Isuzu Rodeo
169 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: