Question about 2000 Ford Taurus
Same as above
Check your thermostat. if it is sticking, it will need to be replaced. Thermostats open at different tempature setting when they are working properly. Check with your auto parts to see what temperature rating your thermostat should be and buy one with that rating.
Posted on Jul 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
air sometimes gets trapped in the heater hoses or heatercore itself pull the upper heater hose off the block,hold it in the air and try to fill it,that should push the air out of the line
Posted on Jan 26, 2009
SOURCE: 1996 crown victoria has no heat
i think it is the heater control valve i think it is mounted on the firewall by the top close to the hood it will have two black 5/8 hoses attached to it check and make sure it still has the cable attached to it before you replace
good luck here is the (how to) for your car
The heater control valve (sometimes called the water flow valve)controls the flow of coolant into the heater core from the engine.
Heater control valves are operated in three basic ways: by cable,thermostat, or vacuum. Cable-operated valves are controlled directlyfrom the heater control lever on the dashboard.
Cable-operated heater valve used to control the flow of water or coolant through the heater core.Thermostatically controlled valves feature a liquid-filled capillarytube located in the discharge air stream off the heater core thatsenses air temperature and modulates the flow of water to maintain aconstant temperature regardless of engine speed or temperature. Mostheater valves utilized on today's car are vacuum operated. These valvesare normally located in the heater hose line or mounted directly in theengine block.
To replace a heater control valve:
Identify the heater control valve carefully. It is easily confused with other parts.
Posted on Apr 23, 2009
check for vacume leaks most common problem for symptoms listed its hoses on engine look for dryrot cracked, or broken hoses or lose come off
Posted on Jun 21, 2009
SOURCE: When I drive my ford
Radiator Fan Relay should be the problem..they had a recall on 01's for it..both fans need to run when the ac is on..more than likely one of the 2 is not working..change the relays
Posted on Sep 26, 2010
Tips for a great answer:
Feb 24, 2012 | Dodge Stratus Cars & Trucks
Sep 15, 2011 | 1998 Oldsmobile 88
Dec 04, 2010 | 2001 Lincoln Continental
May 15, 2010 | 2004 Chevrolet TrailBlazer
Jul 02, 2009 | 1995 Mercury Cougar
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: