Question about 2001 Chevrolet Blazer

1 Answer

How do you get the middle spark plug out on the drivers side 2000 chev blazer V6 4/4

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

You need to use the spark plug socket with a built in swivel and a extension. Once you crack the spark plug loose, remove the socket and remove the plugs by hand. The plugs will not come out with the socket still being used, there is not enough room to between the engine and shock tower mount. Take your time, the fingers get's cramps. It sounds like this is your first time changing the plugs, they all come out easy from the wheel well. You can do it with out removing the wheel, just move the inner splash guard up out of the way to get to all the plugs. The only other hard thing is the removing the plug wire boot from the plugs, I find it easy if you have a plug wire boot pliers. The pulling on the wire just ends up in replacing the spark plug wire set. Good luck and hope this helps. Keep me posted, be glad to help, this should take about 30 min to do all of them. Plug #3 being 10 min alone LOL.

Posted on Jun 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What are the to coil packs on a set of spark plug wires on a 2001 4.3 chev blazer for and what plugs do they go on

Your Coil Pack Is Separate And Plugs Into The Middle Of Distributor Cap.Follow The Middle Wire To Coil Should Be On Passenger Side
Easy Quick Change Out. Cost Is Around $40

Mar 11, 2013 | 2000 Chevrolet Blazer

1 Answer

1999 chev blazer won't start new fuel pump

So, do you hear the pump buzz on, when key is on? If that's good, then check your ignition circuit: check for spark at a plug. Use insulated pliers, hold end of plug wire 1/4 inch form engine bolt or ground source. When cranked, you should see a bright blue spark. Yes? Try another plug wire, too. No? Try another plug wire. If you have NO spark, could be your coil, coil pack, crank position sensor, ignition module. I would recommend using a diagnostic flow-chart to go through the ignition circuit. That way, you are not replacing unecessary parts_Expensive! Of course, if you have spark at plugs, your ignition circuit is good! Then you have to look further, like your injector circuit. Good luck.

Oct 30, 2011 | 1999 Chevrolet Blazer

1 Answer

2000 chev blazer 4.3 new engine no spark to plugs new coil ,ing coil module,cked plugins,new plug wires,cked grounds,no spark

With out checking it out myself,,,My guest would be the (VCM) Vehicle Control Module...
hope this is some help to you ??

Jul 21, 2011 | 2000 Chevrolet Blazer

1 Answer

I can't fit my tools behind the steering column to change the middle spark plug on the drivers side. isn't there a way to disconnect the steering column to move it?

yo--bozo-----5/8 plug socket w/end wrench---also take out the rubbbbbbbbbbbbbbbber boot out of the socket for clearance---------------bozo-------yo

Apr 09, 2011 | 2000 Chevrolet Blazer

1 Answer

How do I replace the rear window panel ( Drivers side, behind the rear door ) Chev Blazer 2000 LS 4 Door

should be a couple of screws and maybe bolts behind door trim and inside body mouldings

Sep 02, 2010 | 2000 Chevrolet Blazer

1 Answer

How do i replace the freeze plug on my 99 chev blazer?

drain coolant out od radiator. you will need to knock out old one. i use a long heay matel screw driver and and brass mallet, no sparks. pound on oneside of the plug. it will spin. once it has spun grab it with vise grips and pull remainder out. ther are 2 kinds of replacement. oem which you have to pound back into place. the other is a rubber plug with washers on either side and a bolt through the middle. much easier to use. put in plug hole tighten bolt and you are good, of course refill radiator.

Jan 10, 2010 | 1999 Chevrolet Blazer

1 Answer

Where is the cooling system sensor on chev blazer 2001

passenger side,facing the engine,middle of the black plastic end tank of your radiator

Nov 05, 2009 | 2000 Chevrolet Blazer

1 Answer

96 Chev S-10 Blazer

you might try a new coil/coil pack, it sounds like your not getting enough spark to the plugs

Apr 27, 2009 | 1996 Chevrolet Blazer

1 Answer

Oil change

it will be in the oil pan on drivers side should be a 15mm

Oct 01, 2008 | 2000 Chevrolet Blazer

1 Answer

Car repair

HI. pay attention please,
ON a Chevy Blazer, the spark plug of a cylinder nuember 3.
Hidden with the steering column.
With a floor jack and a piece of wood. Raise the engine just a little from the Oil pan, becarefull only with wood, because the oil pan is made with aluminun, it's can broke easy.
Untill you get axces to the spark plug.
I hope this information is good for your question.

Jul 07, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

82322 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides