Question about 2006 Pontiac G6

1 Answer

High beams flash but don't stay on

I have a 2006 Pontiac G6 and the high beams flash but won't stay on. The high beam indicator lights up on the dash when I flash the high beams but doesn't come on when I turn high beams into "on" position. I believe it's the dimmer switch but not sure.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

You'd have to play with it and see if it's related to maybe a stuck fog light or simply the high beam switch is junk

Posted on Aug 16, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1993 Pontiac Grand Am dash light dimmer switch burned out

i found mine at an O'Reilly store but junkyards are good

Posted on Jan 22, 2009

  • 1 Answer

SOURCE: high beam lights and driving lights don`t work

Hi,
I got my daughter a 2003 Pontiac Sunfire. They are a lot of electrical work.
The problem is the wiring harness which splits and travels under the battery and the windshield washer reservoir. The wires oxidize and fall apart.
The low beams will work but if you turn on the high beams the lights will go completely out, right?
If this is the case I can pretty much guarantee that you will have to remove the battery, the drivers side front inner fender, the air filter housing, the air throat, and the windshield washer reservoir. You will then be able to open the wiring harness feeding the headlights. The wire that feeds your high beams is a pink wire. Test the wires from the harness plug (located just under the battery) to a point as close to the headlight as you can, Use a simple continuity tester. Also feel and bend the wires. If the insulation cracks and you see a green or lite blue powder then patch a new wire in.
All in all I found 4-wires which I replaced. Everything works now.
Good Luck,
Jay

Posted on Jun 15, 2009

alicantecoli
  • 22095 Answers

SOURCE: headlight trouble on sunfire 2003 with 2.2ecotech

sounds like either a wiring loom is shorting across somewhere ??where ----best of british to finding it

Posted on Aug 05, 2009

  • 580 Answers

SOURCE: high beam indicator light in the dash is always flashing

You have loose or dirty plug connections to the headlights. Clean & reassemble.

Posted on Sep 14, 2009

  • 1 Answer

SOURCE: i have no low beam headlights or daytime running

i had the same problem wit a 97 Sunfire GT. It was the light control switch on the steering whell column. i went to Advanced Auto for the part. I think it was around $35. The lights have worked perfect in all modes every since. hope this helps.

Posted on Dec 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have two questions, first my speedometer won't light up, and my high beems won't stay on. And when I put them on it knocks out the headlights. Please help


18538624 Indicators and high beam lights on dash cluster ...

surf.dev.kinday.ru/.../t18538624-indicators_high_beam_lights_dash_clu...
18538624 indicators and high beam lights on dash cluster turn on and wont turn off. ...The high beam indicator light stay on my dash, I have a 2002 HD night train. ... wontwork and the blue indicator light wont light up when the switch is turned to high beams.. the lights ... remove install instrument cluster speedometer cable.

Cluster/Gauge lights out, highbeams dont work, no fuses ...

www.rx7club.com/.../cluster-gauge-lights-out-highbeams-dont-work-no-...
Feb 17, 2012 - My gauge lights decided to go out one night and I can't find any reason why. ... are on works on my dashboard but the lights behind the gauges don't (speedometer/rpms/gas/temp) and my highbeams wont work. .... My foglights stay onwith the headlights. ... If that's the case someone hacked up some wiring.

Oct 24, 2015 | Cars & Trucks

1 Answer

My daytime running lights work, high beams will come on but switch wont stay on, have to hold it. Low beams do not work and daytime running light dash indicator stays on all the time. Is it a relay or...


if you have to hold the switch so the high beams stay on then that indicates a bad/worn switch,you could have 2 problems the day time running light relay may have a problem with it.i would first replace the headlight switch at the base of the steering colume as by the info you supply its not changing to the high beam side without holding the switch in position.

May 25, 2011 | 1998 Pontiac Sunfire

1 Answer

I have 2006 grand prix and the bright lights wont come on. I move the blinker lever forward and the low beams stay on but i get the blue bright light on the dash, checked fuses all seem to be okay


do you hear the click of the dimmer switch when you move the lever if you do then the steel rod that goes from the lever to the switch itself is working and the switch is moving from the low beam to high beam circuit.if the blue dash indicator is on them power is coming out of the switch to the dash to operate the light.its possible that the dimmer switch may need to be adjusted a little if you don`t hear the click but moves enough to put the dash light on but not enough to turn the high beams on,that is possibly why the low lights stay on.or you have a bad dimmer switch itself

Mar 08, 2011 | 2006 Pontiac Grand Prix

2 Answers

HIGH BEAM LIGHT STAYS ON IN DASH ...SWITCH GOES HIGH AND LOW BUT ONLY WORKS ON HIGH (ONE LIGHT) AND NO LIGHTS ON LOW


I have the same problem and I've tried two fixes so far and neither has worked.
- I replaced the daytime running light module and that didn't work
- I replaced the trun signal/hazard/light switch and that didn's work

I've had one comment that it could be a ground issue.
hope this saves you spending money on "fixes" that don't solve the problem

Dec 03, 2010 | 1996 Pontiac Sunfire

3 Answers

Low beam not working but high beam is-Pontiac Vibe 2005


I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Jan 15, 2010 | 2006 Pontiac Vibe

1 Answer

2002 Aztek Service engine light on & high beam indicator flashes


The high beam light flashing means you have a high beam burnt out. It flashes when you put it in gear because your high beams actually double as your daytime running lights, only on a lower power.

Dec 17, 2008 | 2002 Pontiac Aztek

Not finding what you are looking for?
2006 Pontiac G6 Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...