Question about 2006 GMC Envoy

1 Answer

No power beyond the switch ,have replaced switch and front actuator

4wd wont work no power beyond switch ,replaced switch and front actuator

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GMC Master
  • 1,311 Answers

Have you checked fuse #48 in rear fuse box and fuse #8 in underhood fuse box?

Posted on Apr 03, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 66 Answers

SOURCE: switching in to 4wd on the fly get a loud clunk and some grinding

Yeah i get the same thing when im hitting the whoops at 80 miles an hour.What is the deal with this.

Posted on Jan 23, 2009

  • 103 Answers

SOURCE: have a 98 gmc yukon. just had tranny replaced and

gm has had a lot of problems with the button switch on the dash id start there

Posted on Mar 20, 2010

  • 193 Answers

SOURCE: 4wd not working replaced actuator when i press

Sure sounds like the vacuum switch is not working properly. You have done exactly what I would have done, start with the actuator(most common problem) and go from there. If your not getting the vacuum , then most likely the vacuum switch is your problem.

Please take a moment to rate my answer......... thanks

Posted on Nov 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2002 Chevy Silverado 8 cylinder 4wd extended cab. It has the push button shifter for 4wd. When I try to use 4WD Auto or 4WD Hi, the indicator lights come on but the 4wd does not engage. I read...


Fuse is located at the end of eh dash on drivers side and the Actuator is located at the front differential and on the passenger side.
When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the light blue wire (#900) to the actuator.
When shifted out of 4wd, the switch opens up and no voltage goes to the actuator.

Check voltage at the connector for the front actuator (at the front differential - it looks like a large bullet that threads into the front diff.) If it has 12 volts, the actuator is the problem. If it does not have 12 volts, check the transfer case switch and the power feed to the transfer case.

I'll assume it is the actuator, if the plug to the actuator is getting 12 volts when in 4wd.
The way this actuator works, is it is a sealed chamber that gets heated by voltage. When it heats, the pin in the end swells and pushes a shift fork in the front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD.

GM offered an upgrade to this actuator that is a motor instead of a heated device. However, it requires a small harness addition, a spacer, and a new actuator. It is about a $150 to $200 option.

Good luck. The actuator is usually the problem 90% of time but recheck all of the wire harness just to maker sure there is no short before replacing any parts. The actuator may not be fully engaged or disengaged and the fork to the spline may be what is causing the grinding.

88-UP C/K ACTUATOR UPGRADE
VEHICLE SERVICED: 88-99 CHEVROLET FULL SIZE
PURPOSE: IMPROVE AXLE CONNECT ENGAGEMENT TIME AND
COMPONENT RELIABILITY.

SYMPTOMS: NO FRONT DRIVE AXLE ENGAGEMENT WHEN SHIFTED INTO 4X4.

Obtain the following GM part numbers:
(1) 26060073 Actuator
(1) 88959465 Harness/Spacer Kit

Feb 03, 2010 | 2002 Chevrolet Silverado

1 Answer

1991 K2500 pickup, 350tbi,4l80 trans, 4wd not working, I have gotten it to turn on a couple of times but it never stays working. The transfer case does lock in when its put into 4wd. also the actuator is...


On the full size, the front actuator is electric, not vacuum.

When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the light blue wire (#900) to the actuator.
When shifted out of 4wd, the switch opens up and no voltage goes to the actuator.

Check voltage at the connector for the front actuator (at the front differential - it looks like a large bullet that threads into the front diff.) If it has 12 volts, the actuator is the problem. If it does not have 12 volts, check the transfer case switch and the power feed to the transfer case.

I'll assume it is the actuator, if the plug to the actuator is getting 12 volts when in 4wd.
The way this actuator works, is it is a sealed chamber that gets heated by voltage. When it heats, the pin in the end swells and pushes a shift fork in the front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD.

GM offered an upgrade to this actuator that is a motor instead of a heated device. However, it requires a small harness addition, a spacer, and a new actuator. It is about a $150 to $200 option.

Good luck. The actuator is usually the problem 90% of time but recheck all of the wire harness just to maker sure there is no short before replacing any parts.

88-UP C/K ACTUATOR UPGRADE
VEHICLE SERVICED: 1994 CHEVROLET FULL SIZE
PURPOSE: IMPROVE AXLE CONNECT ENGAGEMENT TIME AND
COMPONENT RELIABILITY.

SYMPTOMS: NO FRONT DRIVE AXLE ENGAGEMENT WHEN SHIFTED
INTO 4X4.

Obtain the following GM part numbers:
(1) 26060073 Actuator
(1) 88959465 Harness/Spacer Kit

Jan 10, 2010 | 1991 Chevrolet K2500

1 Answer

Had 2001 GMC Sierra in 4WD Auto and went to put in 4 hi. then Service 4WD light came on and selector wouldn't let me select anything and the truck stayed in 2 hi.


On the full size, the front actuator is electric, not vacuum.

When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the light blue wire (#900) to the actuator.
When shifted out of 4wd, the switch opens up and no voltage goes to the actuator.

Check voltage at the connector for the front actuator (at the front differential - it looks like a large bullet that threads into the front diff.) If it has 12 volts, the actuator is the problem. If it does not have 12 volts, check the transfer case switch and the power feed to the transfer case.

I'll assume it is the actuator, if the plug to the actuator is getting 12 volts when in 4wd.
The way this actuator works, is it is a sealed chamber that gets heated by voltage. When it heats, the pin in the end swells and pushes a shift fork in the front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD.

GM offered an upgrade to this actuator that is a motor instead of a heated device. However, it requires a small harness addition, a spacer, and a new actuator. It is about a $150 to $200 option.

Good luck. The actuator is usually the problem 90% of time but recheck all of the wire harness just to maker sure there is no short before replacing any parts.

Jan 07, 2010 | 2001 GMC Sierra Crew Cab

2 Answers

The 4wd in my 1996 chevy silverado 1500 wont work and i would like to know how many volts should be travelling through the 4wd wires


On the full size, the front actuator is electric, not vacuum.

When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the light blue wire (#900) to the actuator.
When shifted out of 4wd, the switch opens up and no voltage goes to the actuator.

Check voltage at the connector for the front actuator (at the front differential - it looks like a large bullet that threads into the front diff.) If it has 12 volts, the actuator is the problem. If it does not have 12 volts, check the transfer case switch and the power feed to the transfer case.

I'll assume it is the actuator, if the plug to the actuator is getting 12 volts when in 4wd.
The way this actuator works, is it is a sealed chamber that gets heated by voltage. When it heats, the pin in the end swells and pushes a shift fork in the front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD.

GM offered an upgrade to this actuator that is a motor instead of a heated device. However, it requires a small harness addition, a spacer, and a new actuator. It is about a $150 to $200 option.

If I were you, I would buy a new heated actuator. They are available at most auto parts stores, and are about $90. They are also on eBay for about $55 plus shipping. These are very easy to change - just thread out the old one, and thread in a new one.

Good luck. The actuator is usually the problem 90% of time but recheck all of the wire harness just to maker sure there is no short before replacing any parts.

Jan 07, 2010 | 1996 Chevrolet K1500

1 Answer

CHECK 4WD WARNING CAME ON. AFTER TURNING ENGINE


On the full size, the front actuator is electric, not vacuum.

When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the light blue wire (#900) to the actuator.
When shifted out of 4wd, the switch opens up and no voltage goes to the actuator.

Check voltage at the connector for the front actuator (at the front differential - it looks like a large bullet that threads into the front diff.) If it has 12 volts, the actuator is the problem. If it does not have 12 volts, check the transfer case switch and the power feed to the transfer case.

I'll assume it is the actuator, if the plug to the actuator is getting 12 volts when in 4wd.
The way this actuator works, is it is a sealed chamber that gets heated by voltage. When it heats, the pin in the end swells and pushes a shift fork in the front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD.

GM offered an upgrade to this actuator that is a motor instead of a heated device. However, it requires a small harness addition, a spacer, and a new actuator. It is about a $150 to $200 option.

Good luck. The actuator is usually the problem 90% of time but recheck all of the wire harness just to maker sure there is no short before replacing any parts.

Jan 04, 2010 | 2005 GMC Yukon Xl Denali

2 Answers

1999 tahoe 4 wheel drive trouble light is on. Wont go into 4


my 2000 chevy tahoe 4wheel drive light indicator wont stay on even when i tryto angage automatic 4 wheel

Dec 24, 2009 | 1999 Chevrolet Tahoe

1 Answer

01 suburban 4x4 wont work.


On the full size, the front actuator is electric, not vacuum.

When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the light blue wire (#900) to the actuator.
When shifted out of 4wd, the switch opens up and no voltage goes to the actuator.

Check voltage at the connector for the front actuator (at the front differential - it looks like a large bullet that threads into the front diff.) If it has 12 volts, the actuator is the problem. If it does not have 12 volts, check the transfer case switch and the power feed to the transfer case.

I'll assume it is the actuator, if the plug to the actuator is getting 12 volts when in 4wd.
The way this actuator works, is it is a sealed chamber that gets heated by voltage. When it heats, the pin in the end swells and pushes a shift fork in the front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD.

GM offered an upgrade to this actuator that is a motor instead of a heated device. However, it requires a small harness addition, a spacer, and a new actuator. It is about a $150 to $200 option.

If I were you, I would buy a new heated actuator. They are available at most auto parts stores, and are about $90. They are also on eBay for about $55 plus shipping. These are very easy to change - just thread out the old one, and thread in a new one.

Good luck, That actuator is usually the problem 90% of time.

Dec 09, 2009 | 2001 Chevrolet Suburban

4 Answers

4wd switches blinking and wont engage


the 4 wheel drive switch is an extremely high failure part. i would replace it and you should be ok! hope this info helps!

Sep 22, 2009 | 1996 Chevrolet K1500

1 Answer

01 Chevy Silverado 4 X 4 not working. 4WD light


Having the same exact problem but with my 1999 escalade. Thought it was the actuator bought a new one installed it transfer case would engage but front end wouldnt lock. Took it out of housing left it plugged in got a friend to go through all the 4wd for me and the plunger never moved out the actuator. Checked my wiring harness which is a four prong ann it had one hot prong like it is suppose to. Traced wires even replaced dash switch same problem. Taking it to local dealership tom to have it checked for codes. I was told it could be the transfercase actuator even though its workin that actuator is what sends power to the front to engage the actuator to lock the differential.

May 12, 2009 | 2001 Chevrolet Silverado 1500

2 Answers

4x4 wont engage


First thing to make sure of is to check for a blown fuse. The fuse location is marked 4WD and it should be a 25 amp fuse. If the fuse is bad, the lights on the 4wd console wont light up. If the lights do light up, then you can move to the transfer case. On top of the transfer case, toward the rear of the truck is a switch that has a 2 wire connector. That switch sends power to the front axle actuator when you try to enagage 4wd inside the truck. That could be bad. The switch is threaded into the transfer case and is still available through GM. If the switch is ok and the wiring that attaches to it is ok, then you can move up to the axle. Threaded into the front axle is the front axle actuator. These actuators are prone to failure in older trucks and is very prone to cold weather failure. You can test the actuator by removing it and then WITHOUT the truck running, put the truck into 4wd and then turn the key to the hot position. The plunger inside the actuator will extended outwards. More than likely it will be one of those 3 things. If it still wont engage, you may have a short in one of the wiring harnesses associated with the 4wd system. Also, you may have a damaged transfer case. To check the transfer case, put the truck in 4wd without it running and then crawl underneath and see if you can turn the front shaft by hand. If not....it's good. If you can....then the shifter forks inside the case are worn or damaged. I hope this helps.....start small and work your way up!

Jan 30, 2009 | 1989 GMC K2500

Not finding what you are looking for?
2006 GMC Envoy Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...