Question about 1999 Isuzu Rodeo

1 Answer

1999 isuzu rodeo blow ignition fuse

Ignition fuse blow when turn key will turn over but not fire

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 210 Answers

Check to see if you are using the proper fuse. If so, disconnect the starter solenoid and then try to start the vehicle. If the fuse does not blow, the starter solenoid (entire starter, actually) should be replaced.

Posted on Dec 13, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: 1997 Isuzu Rodeo 4 wheel drive

j'aimerai entrer en contacte avec pour l'achat de votre vehicule

Posted on Nov 18, 2008

  • 3 Answers

SOURCE: power windows isuzu rodeo 1999

Cable must of disconnected need to take door cover off and reconnect...

Posted on Jan 10, 2009

  • 1757 Answers

SOURCE: FIring Order of a 2004 Isuzu Rodeo 3.2L Engine

My apologies for the delay....Due to the bad economy the number of questions posted has skyrocketed 50% in the last 4-months.

For 2WD and 4WD it is the same:
For 3.2L:
Firing Order:
1-2-3-4-5-6
Cylinders:
5-------6
3-------4
1-------2
(front of vehicle)
Coil is on the Spark Plug

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Feb 19, 2010

duane_wong
  • 6826 Answers

SOURCE: Replacing turn signla electronic flasher for 1999

Get the proper flasher from the parts store and start searching under the dash for the one that clicks when the turn signals are operating.

Posted on Aug 03, 2010

honeymokey
  • 3113 Answers

SOURCE: 1999 Rodeo,, Isuzu, starter motor and solenoid

Follow positive wire to starter that has the solenid on it.

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No fire to #10 fuse which feeds the relay. when ignition is turned on this fuse blows and #7 blows when ignition is turned on


what devices are linked to fuse ten and seven ?
have you replaced the relays ?
has any electrical work been done recently ?
what is the amp /volt meter reading to both fuses as the ignition is
turned on ?
the vehicle model or type may help a little

Oct 24, 2014 | Cars & Trucks

2 Answers

Starter just spins after ignition wire replaces - no fire


Sounds like you have the starter wires hooked up wrong and to continuous power. If starter shuts off with the key now, but wont engage the motor, you may need shims so that the starter drive lines up with the motors fly wheel

Apr 09, 2014 | 1995 Chrysler LHS

1 Answer

My hilux won't start keeps blowing the ignition fuse when turning the key on


that is a dead short, the fuse saved you the ensuing fire.
there are 2 fuses or more... with that name..
old cars love to short things, no lie.
the fsm is the best thing to have, and alldata.com , 2nd.
the older that car the more true that is... and your car is 10x that.
a 1991
is the fuse in the cab BOX? NOT ENGINE BAY?
THE CAB FUSE , HAS these (USA cars, other are DIFFERENT)
no country stated (sigh)
ignition sw AM1
ignition sw AM2
ignitor 1
ignition coil (1 for 4cy, and 1 for v6 engine, unsaid)
on one car there is a IGN fuse 7.5 amps
and runs the ECU and main relay.
there are 3 engines, and drawing for all 3.

get the fsm and use that or login to alldata.com and hope
it covers your engine. (unstated)
22r,3vz,3F

Feb 12, 2014 | 1991 Toyota Pickup

1 Answer

30 amp Starter/Ignition fuse keeps blowing when i turn the ignition key. The instrumentpanel lights are dim and then the fuse blows.


I am assuming you are talking about the circuit that powers the key switch. I'm showing a fuseable link to the starter relay instead of a fuse.
If it is the circuit that powers the switch, I would disconnect the switch and see if the fuse blows as each circuit is powered one at a time using a jumper wire. You can get 30amp circuit breakers that plug into the fuse slot to use while you are testing circuits.
You may need a repair book or shop manual to find out what is powered by that fuse since it is most everything on the car.

Mar 01, 2013 | 1997 Dodge Avenger

1 Answer

We have a 2000 Solara that we just replaced the battery in, or rather, we tried, and the horn is now staying on continuously. It keeps blowing a 100 amp fuse, and does not have a key fob type alarm. The...


Why was the battery replaced? Theres no reason the the 100 amp fuse to blow unless the alternator is shorted or you hooked up the battery backwards. I think the 100 amp fuse goes to the alternator. If it was hooked up backwards then you may have engine computer damage.

Aug 25, 2011 | 2000 Toyota Camry Solara

1 Answer

Blowes the pcm fuse when key turn on


Hi, if you have the 4-cylinder, only the PCM and the ignition is on this fuse. If you have the V-6, the camshaft and crankshaft sensors are also on it. What I recommend is to disconnect everything on the fuse except the PCM, and then turn the key on. If the fuse blows, you know your PCM is shorted. If it doesn't blow, reconnect the ignition module and turn the key on again. If the fuse blows, you know the ignition is bad. If not, plug in the sensors one at a time to see which one is shorted. The location of the sensors are shown below, but there are 2 possible locations for the crankshaft sensor. The ignition module is under the coil pack. Please let me know if you have any questions, and thanks for using FixYa.
jturcotte_2027.gif

jturcotte_2028.gif

jturcotte_2029.gif

jturcotte_2030.gif

jturcotte_560.jpg
Ignition module

Aug 06, 2011 | 1995 Oldsmobile Achieva

1 Answer

I have a 1993 ford explorer, every time i turn the ke to the run position, it blows the ignition 60amp maxi fuse under the hood. The first time this happened, I replaced the fuse and the SUV ran fine for a...


I'm no expert but when you turn key to run position, this turns the fuel pump on if the pump is faulty i would think it would blow the fuse also. Or its your theory a short in the ignition system wiring.

Mar 20, 2011 | 1993 Ford Explorer Limited

1 Answer

Ignition fuse keeps blowing when i turn the key


It MUST be the starter relay coil - or the power wire that feeds it. Likely a short in the relay coil (AKA starter selenoid).

Sep 15, 2009 | 2003 Saturn L-Series

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...