Question about 2004 Ford Ranger
Ford has a TON of technical service bullpens for this code but mostly on F-150s. Call your local dealer and ask for the service manager. If he is an honest fellow, he may let you in on a secret recall. Otherwise, The code is for crankshaft position/camshaft position input signal error.
Posted on Mar 25, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 03, 2015 | 2005 Ford Freestyle
Jun 26, 2013 | Cars & Trucks
Feb 26, 2013 | 2002 Chevrolet Blazer
Nov 30, 2012 | Nissan Sentra Cars & Trucks
Jul 24, 2012 | Chevrolet Cars & Trucks
Trouble Code: P1336
CKP Sensor System Variation Not Learned
Set the parking brake and block the drive wheels for safety. Verify the hood is closed. Read the trouble codes. If a code is set, refer to that code. Start the engine. Allow engine temperature to reach at least 158?F (70?C). Then key off. Select Crankshaft Position Variation Learn procedure on Scan Tool & start the vehicle. Apply the brake pedal firmly and verify the selector is in Park. Increase accelerator pedal position until fuel cutoff is reached at the test rpm (e.g., 5150). Quickly release the accelerator pedal after fuel cutoff is reached. The CKP system variation compensating values are learned when the engine speed (rpm) decreases back to idle speed and the procedure terminates. Read the trouble codes and recheck for DTC P1336. If DTC P1336 runs and passes, the CKP system variation "learn" procedure is complete. If not, look for other codes. If no codes are set, repeat the test procedure.
Jul 24, 2012 | Chevrolet Express Cars & Trucks
This is from updated GM service manual of mine.
According to the GM factory service manual, the OBD-II trouble code, P1336, is defined as follows: DTC P1336 CKP System Variation Not Learned. The factory service manual does not enumerate all of the symptoms of this trouble code, but after consulting a professional custom PCM tuner, it was learned that aside from the annoying light on the instrument cluster, the other symptoms exhibited may include: poor vehicle performance, and loss of misfire detection diagnostics.
This DTC is particularly nasty, because simply clearing it by disconnecting the battery, or clearing it using an OBD-II scan tool will not address the problem. The code will be set again later unless the vehicle is run through the actual "crank relearn" procedure.
Fixing the Dreaded P1336 DTC
There is only one way to properly fix the P1336 DTC, and that's to perform a "crank relearn" procedure, or as the GM factory service manual procedure calls it, the CKP System Variation Learn Procedure. This procedure can be initiated and performed by GM's be-all end-all scan tool, the Tech-2. It can also be performed by some aftermarket scan tools. Furthermore, some of the PCM tuning software applications are capable of initiating a "crank relearn" procedure.
Jan 19, 2011 | Chevrolet S 10 Cars & Trucks
Jan 10, 2010 | 2002 Lincoln LS
Jul 11, 2009 | 1997 Nissan Maxima
404 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: