Question about 2005 Cadillac XLR

Open Question

Code P0703/T/C light on/brake light on

Shift inter;ock inoperative

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car is a 2006 forenza it wont shift into overdrive unless i push the hold button but if you leave it on and slow down it has no power any help mine


you sound like guy that works FSM free,?
no books. why do that ,? (pain)
i guess you get scan codes. and above is wrong. P0703. is it.?
post the full codes, all of them all DTCs stored.
then look them up in the FSM and what does it says.
it tells you, to do more tests. to find true cause.

my guess, you never said
car drives prefect,
the CEL glows, or the scan tools shows MIL active.
right>?
the hold is for ice.
the hold prevents down shifts (dangerous) on ICE.

with most feature of the TCM (tranny brain) lots of failures
cross over. to shifting.
lots.
like engine overheated
engine overloaded.
engine speed,
brakes on or off.
cruise controls
traction. and ABS.
direction controls. (if present)

so stop ignoring those codes and fix what it told you to fix
fix the what is it, P0703...
???

the recall (sic) TSB TS-09-03129R
summary:Suzuki vehicles: automatic transmission shift lever is loose in the shift gate and/or ignition key cannot be removed. The transmission gear shift lever does not hold firmly to the left of the shift gage as expected.


and the 703, dont lie. it told you its fails and you ignored this fact.

http://www.aboutautomobile.com/DTC/P0703

it's bad, replace or recalibrate the switch.
and on newer cars the switch may need calibration after the replacement.
owning a Chapter 11 car company car is a PITA.

id sell it. i would and get a Toyota.



Aug 11, 2014 | 2006 Suzuki Forenza

2 Answers

Transmission code po703


P0703 Suzuki - Brake Switch Circuit Malfunction
Possible causes
- Faulty Brake Switch
- Misadjusted Brake Switch
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
Check if the stop light works with the brake pedal, if the brake lights are inoperative, replaced or adjust the brake switch.
Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Brake lights inoperative


Nov 21, 2013 | 2004 Suzuki Verona

1 Answer

Brake light switch


code p0703 refers to torque converter / brake switch B--circuit malfunction===causes--wiring--torque converter/ brake switch--ECM/TCM. The problem may not be in the brakes circuit but in the torque converter sensors.

Oct 22, 2013 | Dodge Avenger Cars & Trucks

1 Answer

Check Engine light with code P0703


About $20 for a new brake light switch that can be installed in about 15 minutes or less usually, may be good insurance for a long distance drive. The code doesn't say it's a switch malfunction, the computer has seen a fault in the brake switch circuit and set the code-could just be a poor connection there.
More important, how do the brake lights work? I think I'd buy the switch or check the connector by the pedal at least. The computer may not let the cruise control work because of the code.

Jul 14, 2012 | 2003 Dodge Neon

1 Answer

Can't shift out of park


This might work for you guy's replace the brake light switch
Easy step by step tutorial watch the video. im sure it will help.
MERCURY MARQUIS STUCK IN PARK
http://youtu.be/fgUn1TuHu-0

Dec 24, 2011 | 2000 Lincoln Town Car

1 Answer

Pontic check engine code P0703


Hi the code P0703 is Brake switch B circuit malfunction. I`m not sure if this means the brake switch
is faulty or the wiring to it is faulty.
The brake switch is the best place to start ( but check the connections to the switch )
I hope i have been of help to you.
john ( South Wales UK )

Jun 30, 2011 | 1994 Chevrolet Lumina APV

1 Answer

Brake lights not working and i have to use the shift lock overide to shift out of park


replace brake light switch on brake padel ......brake light and inter-lock run through it....

Nov 26, 2010 | 1991 Toyota Camry

1 Answer

Brake lights won't come on and can't shift from park


replace the brake light switch,which doubles as the inter lock
switch.. located on the brake pedal shank....the brake lights will work and shift out of park

May 30, 2010 | 2000 Ford Taurus

1 Answer

Ihave code p0703 brake switch,what can I do?


P0703 (M) Brake Switch Stuck Pressed or Released Incorrect input state detected in the brake switch circuit (Changed from P1595).

The switch cost like 20 bucks. It is located on the brake pedal, it will either be in front of or behind the pedal at the top. It will have a plunger that contacts the pedal, and an electrical pig tail. usually you just twist it and pull it out kinda like a headlamp.

Hope this help (remember rated and comment this).

Mar 29, 2010 | 2000 Dodge Neon

1 Answer

Car runs just fine and the check engine light came on. the code is p0703. anyone know what this means? Thanks


torque converter / brake switch b circuit malfunction -- check ur brake light switch may be going bad or connection problem

Jan 20, 2010 | Plymouth Neon Cars & Trucks

Not finding what you are looking for?
2005 Cadillac XLR Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...