Question about 1998 Suzuki Sidekick
Won't go into park
The park lever is stuck in drive, why not say ? this?
the car does start in drive and neutraL.
So does it start in Neutral? crank over, ??????
no car starts if it cant crank (cept my M/T cars)
my 97 is a M/T. so is my 91 and 96.
the suzuki has a operators guide telling you (glove BOX)
how to use the park lock bypass. (the lock is failing here)
the system will not crank if park or netural is not selected first. by design and logic. (fact and features)
the 2 books 95 or 98 here will be correct. under trans usage and sARTING THE CAR. DOWN LOAD IT AND KEEP IT FOR next time.
it says in a nut shell , to access the bypass cover, and flip the lever there. (on the shift console left side)
see it? there, open it ?
Posted on Apr 21, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Thanks for your reply. It turned out that the fuel pump quit at the same time as the diagnostic test so I'm back on track now. Should be running by tomorrow. Thanks again.
Posted on Mar 21, 2009
SOURCE: Where is the O2 sensor located
The Oxygen Sensor is located:
Under hood, driver side, lower engine area, above exhaust pipe flange, mounted in exhaust manifold
Posted on Jan 25, 2010
Hi there? it sounds like the battery is flat ( discharged ). get sumone to givethe car jump start or have the batery recharged or replaced. Good luck
Posted on May 20, 2011
Tips for a great answer:
Dec 06, 2015 | 1992 Suzuki Sidekick
May 29, 2014 | 1998 Suzuki Sidekick
Mar 24, 2014 | 1998 Suzuki Sidekick
Feb 03, 2012 | 1992 Suzuki Sidekick
Dec 04, 2010 | 2000 Suzuki Vitara
Jan 11, 2018 | 1996 Suzuki Sidekick
Mar 19, 2009 | 1994 Suzuki Sidekick
Dec 17, 2008 | 1992 Suzuki Sidekick
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: