Question about 1992 Chevrolet Corvette

Open Question

Horn not blowing looking for fuse

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY MY HORN WONT BLOW?


it is the horn itself faulty.

Aug 28, 2014 | Lincoln LS Cars & Trucks

1 Answer

Silverado horn


Unplug the horn

If the fuses do not blow & you have
battery voltage at the wire connector
you took off, when pushing the horn
pad, then replace the horn

If the fuse blows with the horn out of the circuit,
then you got to do some testing for a short in the
wiring or horn button area.

Personally I would start by looking at a wiring diagram,
so I wasn't guessing at where I'm about to do my testing.

Apr 01, 2014 | 2010 Chevrolet Silverado 1500

1 Answer

1984 gm truck horn fuses blowing, dead short, good relay


It looks like the only thing on the circuit are the horns.
The orange wire goes from the fuse to the relay.
Does the fuse blow if the relay is out of the plug ?
Could be a short in the wiring in the steering column but that should make the horn blow all the time.

Feb 13, 2013 | 1984 Chevrolet C1500

1 Answer

For 2004 ford truck f150 extended cab, I found the horn fuse, where is the horn relay?


disconnect the horn or horns, operate the horn and see if the fuse still blows. if the fuse still blows then there is most likely a short in the wiring. relays rarely cause shorts. if the fuse doesnt blow with the horn disconnected, reconnect the horn and operate the horn again, if the fuse blows you have a shorted horn.

Jul 14, 2012 | 2004 Ford F150

1 Answer

On my 1995 crown vic. one day horn blew on its own for about an hour. i looked and fuse was blown now when i put new fuse in and hit horn, horn sounds for second and fuse blows. everytime i put fuse i


Sounds l;ike the horn itself has a short. Try another from a salvage yard. If fuse blows again, it's likely a wire to horn that lost insulation and touching metal.
Good luck.

Feb 01, 2012 | 1995 Ford Crown Victoria

2 Answers

2006 grand prix horn fuse keeps blowing. what should i look for


horn may be shorted internally. Try pulling the connector off the horn, put in a fresh fuse, see if it blows.

If it still blows, you have a short in the wiring or the relay. If there is no obvious short in the wiring, change the relay.

If the fuse doesn't blow with the horn disconnected, replace the horn.

Sep 11, 2010 | 2006 Pontiac Grand Prix

1 Answer

2008 Ford Escape Horn fuse keeps blowing after replacing alternator. Horn sounds once then the fuse blows. Also radio and song info that displays in the dash console with the compass does not work... The...


I would trace the wire from the horn and see if it was inadvertently damaged when the alternator was installed. If you have a voltmeter, you can remove the horn fuse and check to see if there is continuity between the horn (non hot side) of the fuse and the car body. This would indicate a short in the wire running from the fuse box to the horn. You can also look around the alternator mounting area to see if any wires are being pinched. Hope this helps. Good luck!

Mar 10, 2010 | 2008 Ford Escape

1 Answer

On my 1972 duster,when i blow the horn,the fuse blows and the tail lights go out also. the same fuse runs both.what could be the problem?


This sounds like the horn may have a short in it somewhere. Does the horn blow at all? Try this: Make sure you have a good fuse installed to this circuit again. Disconnect the horn and place a volt/ohm meter set to DC volts on the horn connections. If there is just 1 wire going to the horn, put that wire on the red wire of the meter. Put the black wire of the meter to a good ground, preferably the negative battery terminal. Now press the horn and see if there is a reading of around 12 Volts. If so, replace the horn. If not, and the fuse blows again, check the wiring for a fray/short to ground. When you're looking at the horn of course, make sure the positive lead isn't shorting to ground as well.

I hope this helps! Let me know if you need any more assistance! :)

-Jason

Feb 11, 2010 | 1983 Plymouth Gran Fury

1 Answer

Horn fuse keeps blowing out


Check the wiring around the horn and make sure nothing is touching metal...look under the hood at the horn and make sure everything is pluged in and there is no water on any plugs or wiring...Make sure the fuse is the correct number (ex: 10, 20, 25) If it is still blowing out the fuse then you after you do some checking then it is a short in some wires

Apr 18, 2009 | 1995 Toyota Camry

1 Answer

Electical


You may have some short circuits in your wiring, a bad horn relay or horn unit, and/or a bad wiper motor. Hard to tell without actually looking at it.
Try this:
Disconnect the horn, and try another fuse. Does it blow? If not, the horn is shorted, and needs replaced. If it blows, remove the horn relay & try another fuse. Same with the wiper motor, unplug it and try another fuse. If it does not blow, you need a wiper motor.

Sep 26, 2008 | 1985 Toyota 4Runner

Not finding what you are looking for?
1992 Chevrolet Corvette Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...