Question about 2002 Chevrolet Cavalier Coupe
I need to know how to manually raise my driver's side window because the window motor is not working
Take off interior doorpanel and try to manualy push window up a spray of lubricant in the window runners may help ,if window wont move you will have to cut the wire that goes through motor , you will have to renew the motor assembly any way , push window up and wedge each side at bottom of window inside car until you can get new window motor assembly
Posted on Mar 25, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to replace the regulator. When cable comes off track it usually binds up in the motor. motor, and cable all come preassembled as one unit, known as the regulator.
Posted on May 21, 2009
SOURCE: 2001 1500 silverado power window
no. all the windows get their power from the driver switch. you need to actually check the circuit..using a volt meter check for power and ground..you are missing one of them..
Posted on Jun 11, 2009
To replace the power window motor:
1. Remove inside door panel, and locate the motor.
2 Unplug the motor, drill out the rivets that hold it in, then you can remove it.
3. the new motor may come with fasteners to install it, otherwise use 1/4 - 20 nuts and bolts to attach the new motor.
Posted on Sep 13, 2009
Testimonial: "Thanks Guru. When I saw those rivets, I thought it wouldn't be possible. Thanks brother."
SOURCE: Driver's side power window was
Hi, that wire is disconnected when the door panel is removed to work on the window motor. Take the car back and ask them to reconnect your door locks. If you want to fix it yourself, you may be able to access the connector by removing only the control panel where the door lock switch is installed. Remove any visible screws and then pry gently to pull up the panel. Odds are, however, that the whole door panel will need to be pulled loose to find the cable. You can possibly just pull the bottom of the panel loose, but do it carefully. Feed the wire back up to the control panel and reconnect to the switch. Thanks for using Fixya.
Posted on Jan 24, 2011
Testimonial: "Thanks very much for your quick response. I thought that was the situation. Go out and make today your best day ever!"
Tips for a great answer:
Jul 29, 2014 | 1999 Jeep Cherokee 4WD
Jan 03, 2013 | 1992 Ford Explorer
Mar 27, 2017 | 2003 Cadillac Deville
Jun 07, 2012 | 2006 Dodge Stratus
Mar 04, 2011 | 2002 Chevrolet Silverado 2500HD
Mar 20, 2010 | 2003 Hyundai Tiburon
Jul 13, 2009 | 2000 Buick Century
Jun 14, 2009 | 1991 Chevrolet S-10 Blazer
Dec 13, 2008 | 2004 Jeep Grand Cherokee
270 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: