Question about 1996 Chevrolet K1500

Open Question

1996 Chevrolet gram steering

1996 Chevrolet full-size van gladiator edition need diagram for ignition switch removal and replace

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1996 chevy express van audio wiring diagram

go to www.the12volt.com

Posted on Aug 31, 2008

  • 11 Answers

SOURCE: Need to remove ignition switch on 1998 chevrolet malibu-How?

Hello rsscott50

I hope you have this thing fixed but if not you can try this.
First I need to assume the "lock cylinder" will turn with the correct key installed.?

You must turn the lock cyl to the run position. I suggest disconnecting the battery first.

I pull the radio out to gain access to the ign. switch.

If you have a small mirror it will really help to find a small square hole in the top of the "plastic" part, "the ign. switch".

If replacing only the lock cylinder you will NOT need to take the 2 screws out holding the plastic piece to the dash.

You will need a tool of sorts so once to locate the small hole on the top of the ign switch and also have the lock cyl rotated to the run position, you press the tool into the small hole.
Tool--can be about the size of a medium screw driver--but the end will have a bend, a right angle bend and the bent piece approx. 3/8" in length.

You will be pressing down on a button help there by a weak spring, look on the new lock cylinder.

As you press down or inward pullout on the lock cyl.
It's that easy.

After installing the new lock cylinder, if that is what your are doing, you might not be able to start the car.
Most chevys have a chip built into the lock cyl. with a sort of password--if the car doesn't see the right password it wont start.

Question: if you need further instruction please let me know.
If the Lock cylinder does not turn, then the fix has another & different approach but you can do it.

Good Luck,
Dave

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: repair tilt steering column on sk 1500 chevrolet

http://www.chevyasylum.com/column/tiltcol.html

Posted on Jul 07, 2009

  • 14036 Answers

SOURCE: I need the serpentine belt diagram for a chevy Express Van

DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.

Posted on Mar 10, 2010

  • 14036 Answers

SOURCE: ignition switch 2001 chevrolet impala

YOU NEED A HAYNES REPAIR MANUAL WITH PHOTOS TO SHOW YOU HOW TO REMOVE STEERING WHEEL AND DISABLE AIRBAGS.YOUR IGNITION SWITCH IS IN THE STEERING COLUMN.

Posted on Jul 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to replace the ignition on a 1996 chevy astro van have the steering wheel off just dont know what to do next


their is the locking ring , you must push it down and take the small snap ring off of the shaft . then the blinker switch, e flasher.their is one screw holding thecylender switch in .

Sep 13, 2010 | 1989 Chevrolet Astro Cargo

1 Answer

Ignition switch 2001 chevrolet impala


YOU NEED A HAYNES REPAIR MANUAL WITH PHOTOS TO SHOW YOU HOW TO REMOVE STEERING WHEEL AND DISABLE AIRBAGS.YOUR IGNITION SWITCH IS IN THE STEERING COLUMN.

Jul 07, 2010 | 2001 Chevrolet Impala

1 Answer

1990 chevy gladiator van steering column has came loose. It is floppy, how and what is the best way to correct this.


I will assume you really have a G10-20-30 van.(half/ 3/4 or 1 ton full size van)
The fifth digit of your vin should be a G.
Not the 2wheel drive pickup indicated.
That being said, your Gadiator is an aftermarket conversion van with a loose column.
This would have to be a loose tilt bowl on the steering column.
After removing the steering wheel and lock plate, you will find four inverted torx bolts that hold the tilt bowl to the column. Two will be backed way out and loose.Remove these bolts and appy loc tite to the bolt threads, then reassemble.

Feb 24, 2010 | 1990 Chevrolet C1500

2 Answers

To how remove key ignition 1996 chev


You have to remove your steering wheel and the with the assistance of a special tool you remove the plate under the steering wheel. Then you remove the screw that holds the ignition switch it will come out.

Feb 15, 2010 | 1996 Chevrolet C1500

1 Answer

Trying to take horn button off so i can replace ignition switch


If the horn button is of soft, flexible plastic, it may be only held in place by a molded flange and these can be pried off. Once off, the nut holding the steering wheel on should be accessible.
When remounting that plastic 'button', I would pull the horn fuse or end up frustrating yourself and the neighbors. They are keyed so logos end up right-side up and not always easy to mount again.
BTW, whenever removing the steering wheel; once the nut is off, clearly mark the steering column and mating hole with correction fluid or a marking pen since getting the wheel just a few degrees off will be forever annoying.

Dec 30, 2009 | 1996 Chevrolet K1500

1 Answer

Sprak plug Wires Need To Be Installed Correctly


You have several RAM sub-models in here:
Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} B1500 RAM Van
B2500 RAM Van
B3500 RAM Van
RAM 1500 1/2 ton 2WD
RAM 1500 1/2 ton 4WD
RAM 2500 3/4 ton 2WD
RAM 2500 3/4 ton 4WD
RAM 3500 1 ton 2WD
RAM 3500 1 ton 4WD

Chrysler Full-Size Trucks 1989-1996 Repair Guide
To avoid confusion, remove and tag the wires one at a time for replacement.


f160dd3.jpg


Fig. 1: 2.5L 4-cylinder Engine. Engine Firing Order: 1-3-4-2. Distributor Rotation: Clockwise


a1a8242.jpg

Fig. 2: 3.9L V6 Engine. Engine Firing Order: 1-6-5-4-3-2. Distributor Rotation: Clockwise


dc6748e.jpg

Fig. 3: 5.2L and 5.9L V8 Engines. Engine Firing Order: 1-8-4-3-6-5-7-2. Distributor Rotation: Clockwise


832c92e.jpg

Fig. 4: 8.0L V10 Engine. Engine Firing Order: 1-10-9-4-3-6-5-8-7-2. Distributorless Ignition


Hope helped with this (remember rated this help) Good luck.

Nov 06, 2009 | 1996 Dodge Ram

1 Answer

How do you replace the ignition switch for 1996 chevrolet cavalier?


Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding

  • Disable the airbag system
  • Remove the tilt lever if equipped
  • Remove the upper and lower steering column covers
Ignition Switch

  • Remove the ignition switch retaining screws
  • Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors
Key Lock Cylinder

  • Turn the key to the run postion
  • Depress the lock button and remove the key lock cylinder

Nov 02, 2009 | 1997 Chevrolet Cavalier

1 Answer

Van wont shut off


The same thing happened to my1996 van. It turned to be the ignition switch actuator.The problem is you cannot replace this unless you replace the whole steering setup.

Apr 10, 2009 | 1996 Ford Windstar

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...