Question about Cars & Trucks

1 Answer

I'm changing my tire on my 1999 Isuzu rodeo and one lug bolt is different than the others how do I take it off

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 96 Answers

The bolt needs to be pressed off the hub, using a hydraulic press. Your post doesn't state whether this is a front or rear wheel, but either way, it is a bigger job, with rear wheels requiring removal of the axle. Best to get a mechanic.

Posted on Jun 05, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: how to change oil transmission isuzu rodeo 2003

There are two drain plugs on the bottom of the pan. remove the lower one to drain the trans fluid. To refill, use a pump and pump the fluid into the upper drain plug until it seeps out and re-install the plug, similar to refilling a manual trans.
Once this is done, Start the vehicle and run it for about 3 minutes, shifting through all gears (do not drive vehicle Remove the upper drain plug and let any excess fluid drain out. Done. This is as per Mitchell OnDemand.

Posted on Aug 14, 2008

  • 2 Answers

SOURCE: what is the 98 isuzu rodeo head bolt torque

joyce, there are different specs for sohc and dohc engines. my advice is to get a Haynes manual from the auto parts store.

doug

Posted on Sep 01, 2008

  • 3 Answers

SOURCE: power windows isuzu rodeo 1999

Cable must of disconnected need to take door cover off and reconnect...

Posted on Jan 10, 2009

MrScary66613
  • 1990 Answers

SOURCE: wont start 1999 isuzu rodeo

Locate the Fuel Filter and Take it loose. Try to Start the Truck, If the Pump is Good, Fuel will come out of the Fuel line going to the Filter. Please Rate My Response! Thanks!

Posted on Feb 07, 2009

daves944
  • 1050 Answers

SOURCE: timing belt replacement on a 1999 isuzu rodeo 2.2

When you replaced the cylinder head, it would have been absolutely critical that the camshaft was already in the right position before you bolted it down. You cannot just bolt the head on and then turn things to line up the cam timing marks or you will bend valves while doing so. If this is what happened, the engine will not start and the head will have to come back off so that you can replace the bent valves.

Posted on Mar 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change rear tire on a 1999 trooper


Break lugs loose first. Chock opposite front wheel Jack upwhere the sprng meets up to the frame in fornt of the tire. Raise vehicle until tire is free by about 1 inch. Remove lugs swap with spare. Snug lugs then lower trie and then tighten lugs. put jack and chock away. That should take care of it.

Sep 26, 2014 | 1999 Isuzu Trooper

1 Answer

How do i change rear wheel tire in isuzu trooper


Loosen lugs first. Chock opposite front wheel. Put emerengcy brake on. Jack up vehicle where the rear spring meets with the frame. Raise vehicle about 1 inch swap tires. Install lugs snug. Lower vehicle till tire just touches the ground then tighten lugs. Finish lowering the jack and remove chock place both in vehicle.
Start truck, release jack and continue on your way. Make sure spare has proper amount of air. If not go to gas station and fill tire. If low on air do not go over 30 mph. Hope this helps.

Sep 26, 2014 | 1999 Isuzu Trooper

1 Answer

How to change starter on 2000 Isuzu rodeo


like all cars. youtube it.
1: REMOVE battery neg lug.
2: remove the wire to starter solenoid.
3: remove the bolts, holding it to bell housing.
bam its out.
reverse above to put back.

Aug 21, 2014 | 2000 Isuzu Rodeo

1 Answer

How do u take a anti lock lug bolt off the tire of a 1999 Isuzu rodeo


Sounds like you misplaced your locking lug key. You can buy a large screw extractor, or just drop by an auto body shop...one of the guys there can knock them loose with a tool called an air chisel. You could also try to manually loosen with a standard hammer and chisel (wear eye protection for sure). Make sure all the other lugs are on and tight, loosening the lock first.

Mar 24, 2014 | Cars & Trucks

1 Answer

I need a digram showing me how to change the shocks on my 1999 isuzu rodeo


It is quite easy really, Remove the wheel on the corner you want to change, The back ones have one bolt at the top and one at the bottom, Simply unbolt the old one and fit the new one, The front ones are pretty much the same but they may have 2 bolts at one or both ends, Simply unbolt and fit the new ones, just make sure the replacements are bolted in tightly.

Mar 06, 2012 | 1998 Isuzu Rodeo

1 Answer

My 1999 Isuzu Rodeo 4x4 four wheel disk rear wheels will not come off even without the lug nuts, why?


Because the wheels are corroded to the hub, causing it to seize. Leave one nut threaded on just a few turns (so your wheel doesn't go flying), get a big hammer and hit the inside of the tire with a good solid shot. That wheel will break loose pretty quick. Good luck!

Nov 06, 2011 | 1999 Isuzu Rodeo

2 Answers

I have a 1997 isuzu rodeo. 2wd. the front left wheel hub has sheered off 3 of the lugs. do I need to replace the entire wheel hub or can the lugs be replaced? If so how.


Depends if the studs are pressed in or an as built unit. Have a look at what the stud looks like and if it appears to have little grooves in the back side, you can hammer out the other 2 and then replace. I would also look into why the studs are having that much force that they are being sheered off.

Mar 14, 2011 | 1996 Isuzu Rodeo

1 Answer

I broke a lug on a 1999 Isuzu Rodeo. I would like to replace it, but there is not enough clearance to remove the broken piece, much less push a new one in. Is the plate the lugs push into a separate part...


There should be enough clearance somewhere, turn the axle. There will be an indent somewhere so you can get it into the hole, it will probably be tight but it will go

Mar 08, 2011 | 1999 Isuzu Rodeo

1 Answer

Where can I get tire for ISUZU RODEO 1999


Firestone tire seems to be the most educated and reasonable in the tire Industry today, they have greaty products and for the most part they hire and train credible technicians that think customer first not the other way around, however never leave your guard down in anything you do in life these days.Good luck hope this helps!!!!

Nov 05, 2010 | 2002 Isuzu Rodeo

2 Answers

Timing belt replacement on a 1999 isuzu rodeo 2.2


When you replaced the cylinder head, it would have been absolutely critical that the camshaft was already in the right position before you bolted it down. You cannot just bolt the head on and then turn things to line up the cam timing marks or you will bend valves while doing so. If this is what happened, the engine will not start and the head will have to come back off so that you can replace the bent valves.

Mar 16, 2009 | 1999 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...