Question about 1999 Jeep Cherokee

2 Answers

Turn signal flasher not loud enough

Need to find a louder turn signal flasher

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

They actually have their own speaker. I had a 94 that did the same thing, I replaced the speaker for it in the dash and that resolved the issue.

Posted on Mar 26, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

See previous poster, where he begs more quite.
in your case, add a 12vdc beeper to the dash flashing indicators.
if you have 2 indicators, add 2 diodes to the beeper , ask.
the best way is at the flasher, ( 2 diodes and beeper.)
beep minus to ground
beeper plus to 2 cathodes (band) 1N4004 diodes, (ubiquitous part) and the each ANODE to each side of flasher Left and right.
bingo , it makes more noise.

i can do a schematic easy, ask.

Posted on Mar 25, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn Signal not loud enough


http://www.turnalarm.com. it looks like they have a little bit of everything as far as flashers. I would check them out. These are design for the hard of hearing apparently. I am going to check them out myself when I can afford to as I am hard of hearing too.

Feb 19, 2018 | Ford Cars & Trucks

1 Answer

I can't hear signal light flasher is something that can magnify it?


The signal light flasher is a thermal switch that makes a noise as it heats up and opens the contacts. Try replacing the flasher. It's possible the new one will be a bit noisier. Failing that, consider a hearing aid.

Nov 03, 2017 | Cars & Trucks

1 Answer

Why are turn signals making a loud buzzing noise?


sound like the turn signal flasher may be on its way out. there sometimes built into ur hazard switch. depending on model. locate ur turn signal flasher and replace. u should be good thenn

Nov 16, 2015 | Cars & Trucks

1 Answer

Replace turn signal flasher 1999 yukon


There is not such flasher module available, this uses an electronic flasher. The old ones where a mechanical heated metal design and louder ones where made.

Jun 13, 2012 | 1999 GMC Yukon

1 Answer

I have a 2000 Dodge Durango and we have been having blinker problems too lately. Sometimes they worked, sometimes they didnt, and the other day they went out completely.They have been doing this for a...


that vehicle has a desperate relay for the hazards which is why they work, you have a defective signal flasher sometimes called a signal relay, follow the noise to locate exactly where the part is, usually under driver side of dash, it is a very cheap part and easy to install.

Sep 26, 2011 | 2000 Dodge Durango

2 Answers

The turn signal click is not loud enough.


Do what I did: go to Radio Shack and get a 12-volt chime (80dB Chime
Model: 273-071), about $10.00. Then do what the person quoted below did. You'll NEVER forget that your signal was left on. ALSO: if the sound is too loud for you, tape a few thicknesses of paper towel around it to reduce the sound level.

[3 of 3 customers found this review helpful]
A GREAT little device By Karlbadge_vr_en_us.gif from Athens, Alabama on 7/19/2007 Pros: A safety device, Consistent Performance, Durable, Easy To Configure, Versatile Best Uses: In The Car Describe Yourself: Tech Savvy Primary use: Personal Bottom Line: Yes, I would recommend this to a friend Comments about RadioShack 80dB Chime:
These are GREAT devices. For years I have used them on my cars, trucks, and motorhome. My turn signals are not equipped with a sounder, so very frequently I forget they are still on when I make shallow turns such as getting onto the Interstate or passing another vehicle. These little chimes remind me to turn off the signals.

They are so easy to install. Just strip about an inch and a half of insulation from each of the three wires. Twist the blue and black wires together. Find your turn signal flasher under your dashboard. (Listen for the clicking when you turn on the signals.) Pull the "flasher" out of its socket. You should see two prongs. Wrap the blue/black wires around one prong and the red wire around the other. Plug the flasher back in and turn on the signal. (Don't forget to turn on the ignition first.) If the chime works, just attach it to anything under the dash. If it doesn't, just reverse the leads on the flasher prongs.

I have NEVER worn out one of these chimes. Of course, I am using them at their prescribed voltage of about 12 VDC.

Jul 04, 2009 | 2008 Toyota Sienna

2 Answers

Need loud signal flasher for 2008 Toyota RAV4


the module can be replaced by a chime or a truck blinker switch from a diesel truck shop and you may here it, however the other guy is right and has a couple good ideals. JC whitnet has one
here is the web page. and this is for the
RAV 4 http://www.jcwhitney.com/autoparts/Search?catalogId=10101&storeId=10101&sku=loud+turn+signal+flasher
g_13364g_th_1.gif;pv2b80a320e50f7422 CEC INDUSTRIES MUSICAL AND VERY LOUD TURN SIGNAL FLASHERS
Hear your turn signal over road noise and music! Select "Love Me Tender" which plays at standard volume, or our signal flasher louder than a standard flasher.
Review this product

Jun 26, 2009 | 1999 Toyota RAV4

2 Answers

97 honda accord turn signal problem


Flasher unit is bad. Replace flasher

Dec 28, 2008 | 1997 Honda Accord

2 Answers

No flashers or turn signals


Try the fuse/breaker panel under hood, drivers side.

Jun 20, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
1999 Jeep Cherokee Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...