Question about Ford Bronco
I can here it clicking sounds like the starter but im not sure. Tried jumping it but it did nothing.
Go under and jumper the solenoid wire to the positive batter cable at the starter and see if it cranks over, if it does the startwer sub solenoid may be defective, it is near the battery and the positive cable goes to it from the battery and then out to the stater.
Posted on Mar 24, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
REMOVE BATTERY TERMINALS AND CLEAN REINSTALL AND TRY TO BOOST AGAIN BEFORE YOU SPEND OUT ON STARTER OR MORE EXPENSIVE ITEMS
Posted on Nov 27, 2008
Loose or coroded battery terminals or starter, clean battery connections, try it, if that doesnt work, probably starter
Posted on Jan 11, 2009
Used a test light at starter, on small wire check for voltage while some one turn key to start.if you do have voltage there starter bad . Replace it. If you need to move truck tap starter with hammar while some one turn key to start.Remember you'll still need to replace starter.
Posted on Nov 16, 2009
hi sounds like your starter motor has packed in with all the trying.. just quickly put your car in 5th gear and give it a rock this might release it if not then you gota replace it and as a must get your battery charged up so it has the correct cranking amps to turn the starter
Posted on Dec 26, 2009
Tips for a great answer:
Feb 21, 2013 | 1989 Ford Bronco
Dec 14, 2012 | Cars & Trucks
Mar 14, 2011 | 1999 Daewoo Leganza
Jan 29, 2011 | 2000 Dodge Intrepid
Feb 14, 2010 | 1989 Ford Bronco II
Jul 02, 2009 | 1994 Ford Bronco
Apr 07, 2009 | 1995 Ford Bronco
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: