Question about 2000 Toyota Camry
No power or request for unlock code after installing new alternator
Is your problem that the vehicle will not crank and has no power, or that the door lock remote is not working? Im not sure that I understand your question and dont want to give the wrong answer.
There are no "codes" persay for anything but radios as far as end user procedures go. Programming doors on a 2000 camry is...fun to say the least. the procedure is published all over the web and very weird, but thats what they designed..
Short version is, Doors all closed, Ebrake on, key in your hand you in the drivers seat. Insert key and do not turn, then remove again. Do this TWICE. Now key is out, within 45 seconds, pres the electric LOCK button on the door LOCK-RELEASE-UNLOCK-RELEASE and repeat 4 more times for a total of 5 cycles. After the 5th time is complete, open the door, then close the door. Then do the LOCK-RELEASE,UNLOCK-RELEASE thing another 5x. At the end of this the door locks SHOULD cycle by themselves twice, if they do not...cycle the ignition key on and off again. and see if they cycle. I=When they cycle trhat means its in learning mode! Press door both buttons on yor remote at the same time, then release. Then do the next remote the same way. That is how they designed field programming.
Posted on Feb 03, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
Push and hold trip button on dash with key off, turn key on but don't start, odometer will clock down, when it is finished, lite will go off
Posted on Apr 08, 2009
The problem is in the sunvisor light. You will have to take the light assembly off and you will find wires have become disconnected.
Posted on Jan 29, 2010
Tips for a great answer:
Jul 22, 2015 | Toyota Cars & Trucks
Jan 29, 2012 | 1997 Toyota Camry
Dec 01, 2011 | 1998 Toyota Camry
Oct 01, 2011 | 1994 Toyota Camry
Aug 24, 2010 | 1995 Toyota Camry
Feb 15, 2010 | 2003 Toyota Camry
Dec 09, 2009 | 1994 Toyota Corolla
Oct 06, 2009 | 2004 Toyota Camry
Jul 01, 2009 | 1995 Toyota Camry
Feb 21, 2009 | 2005 Toyota Camry Solara
87 people viewed this question
Usually answered in minutes!