Question about 2012 Fiat 500
Vehicle has code P106FC
Posted by Anonymous on
Tips for a great answer:
??There are two types of DTC's, 1 trip DTC's and 2
??A 1 trip DTC is for a condition that requires
immediate attention such as a catalyst damaging
??A 2 Trip DTC is one that a condition must be found
during 2 consecutive trips such as an EGR fault.
??Most Monitors do not set a DTC and light the MIL
when a vehicle fails a test for the first time during a
DRIVE CYCLE. If a test is failed on a second
consecutive DRIVE CYCLE the MIL will light and a
DTC is stored in the vehicles powertrain control
Feb 07, 2016 | Cars & Trucks
Jul 11, 2015 | 2005 Chevrolet TrailBlazer LS
engine light comes on and off, these are indication that there is some
error code stored in your vehicles ECM. The engine module computer
needs to be scanned. These will give the code and as per the error code the
further problem can be detected and confirmed. The engine light
indicator blinks or remains steady on dash when engine computer
noticed any problem with any engine electrically operated components.
more help, I suggest you to refer the help links provided below. These will let
you know more about which areas to look, check, when there is engine light
coming up on dash panel.
the link below: -------
details will help.
Nov 28, 2012 | 1999 Acura CL
Jun 27, 2012 | 1998 Oldsmobile Silhouette
Feb 07, 2012 | Cars & Trucks
Nov 04, 2011 | 2006 Ford Explorer
Illuminates when the ignition is switched on. It should extinguish as soon as
the engine starts.
If it illuminates with the engine running, it indicates a malfunction with the engine management system. Have this checked as soon as possible.
If it flashes when driving, reduce the vehicle speed immediately until the light illuminates constantly. If it continues to flash, avoid heavy acceleration and high engine speed, stop the vehicle and have it checked immediately.
On some vehicles this light may be red - again stop the vehicle and seek assistance.
If it is safe to do so, try stopping the vehicle, switching off the engine, wait two minutes, then restarting the engine to reset the engine management system.
With the light illuminated, the vehicle is still safe to drive as long as no other faults are apparent with the engine. Have the vehicle checked by a dealer or garage as soon as possible to avoid any damage being caused to the catalytic converter
Jun 09, 2011 | 2007 Isuzu MU-7
Mar 22, 2011 | 2003 GMC Envoy
Dec 22, 2010 | 2000 Toyota Tacoma PreRunner
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: