Question about 2001 Daewoo Lanos

Open Question

2001 daewoo lanos fuse diagram

Which fuse is for turn signal

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jrosario
  • 2 Answers

SOURCE: !999 Daewoo Lanos

201b665.jpege046938.jpeg

It verifies well the year, it is of one of 1999

I hope that it should serve you

Posted on Oct 21, 2008

  • 1 Answer

SOURCE: Daewoo Lanos fuse box. what

my lanos is overheating replaced thermostat, changed radiator fluid, it still over heats could it be the fuse??

Posted on Jan 23, 2009

  • 1 Answer

SOURCE: 2001 Daewoo Lanos coolant temp sensor

The coolant temp senson is on the EGR valve mounting adapter

Posted on Mar 09, 2009

  • 155 Answers

SOURCE: Can't find transmission fluid dipstick in 2001

the daewoo lanos has no dipstick. The owners manual suggests that you take the car to a dealer to have them check it. Im sure they want you to pay them for frivolous things. Hence daewoo is no longer sold in usa. I wonder why Answer #2 A grey plastic plug with a large screwdriver slot in it located on the top of the transmission box when unscrewed and removed reveals a small dipstick attached to the underside of the plastic plug. This is also where you add any new transmission oil should you drain it or need to top it up.

Posted on Jun 09, 2009

stevenhurc
  • 450 Answers

SOURCE: 2001 Daewoo Lanos Fault 63.58X 'B'

DTC 63 Will Set When
No voltage is supplied by the ECM through the EST “B” line while reference pulses are received by the ECM from the crankshaft position sensor
check white wire terminal B on ignition coil to ECM terminal C14 for open circuit or short to ground while disconnected if thats ok check for voltage signal at B while cranking no signal ECU faulty. voltage signal also on A terminal while cranking and check earth terminal C to body no higher than 5 Ohms
power is terminal D 12V
if getting power, earths good, and both signal voltages are going into coil pack, coil pack is faulty.

Posted on Jun 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which is the color and position of the daewoo lanos 2001 camshaft wiring circuit


Note the diagram. The black wire is ground. The pink wire is voltage, fuse protected circuit, hot with key on. The brown wire with white tracer is signal wire goes to computer.

26134204-5ugelrxrd5vvz515nv4yldsb-1-0.jpg

Mar 18, 2016 | 2001 Daewoo Lanos

1 Answer

Timing belt diagram 2001 lanos


As you haven't said what engine you have, here are the diagrams for the 1.4 1997-2003 and the 1.6 1997-2001
25509670-3rwylk0kdq3mwjjzpclkghnz-4-0.jpg 1.4 Lanos


25509670-3rwylk0kdq3mwjjzpclkghnz-4-2.jpg
1.6 Lanos

Hope this helps

Mar 03, 2015 | 2001 Daewoo Lanos

1 Answer

Signals lights will not work


Check indicator relay, hazard light switch operation and replace components if necessary. Also check fuse in fuse box.

Nov 11, 2012 | 2001 Daewoo Lanos

1 Answer

I have a 2000 Daewoo Lanos hatchback. All the turn signals quit working last weekend but all other lights work. I suspect I have a bad fuse. What fuse do I need to replace and where is it located?


since the tail lamps and brake lamps work it will not be a fuse
the directional switch incorporated inside the steering column needs to be checked

Aug 20, 2011 | 2000 Daewoo Lanos

1 Answer

2001 Daewoo Lanos back wiper


Right had side of steering wheel, push the lever back.

Oct 01, 2009 | 2001 Daewoo Lanos

1 Answer

2001 Daewoo Lanos Fault 63.58X 'B'


DTC 63 Will Set When
No voltage is supplied by the ECM through the EST “B” line while reference pulses are received by the ECM from the crankshaft position sensor
check white wire terminal B on ignition coil to ECM terminal C14 for open circuit or short to ground while disconnected if thats ok check for voltage signal at B while cranking no signal ECU faulty. voltage signal also on A terminal while cranking and check earth terminal C to body no higher than 5 Ohms
power is terminal D 12V
if getting power, earths good, and both signal voltages are going into coil pack, coil pack is faulty.

May 30, 2009 | 2001 Daewoo Lanos

1 Answer

Windshield wipers dont work


wiper motor easy to change just remove arms first ,check fuses first though as these units last the life of the car normally .look for fuse panel and you will find----look inside fuse panel cover and the fuses are shown

Nov 11, 2008 | 2001 Daewoo Lanos

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...