Question about 1998 Acura Integra Type R

Open Question

1998 acura distributor timing - 1998 Acura Integra Type R

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Acura el1.6,wont crank when engine is hot


Distributer has nothing to do with cranking. Sounds like starter, tap on starter while someone holds key in start position. Make sure your battery cables are good, too.

Jul 14, 2014 | 1998 Acura RL

1 Answer

My 1993 acura has no spark on it


On most older Acura's it's the coil inside the distributor that went bad. Replace the distributor, verify timing and that should fix it.

Oct 20, 2013 | 1993 Acura Integra Hatchback

1 Answer

My 97 Acura 4cyl manual trans won't start because spark is not happening at right time.


If you have not removed the distributor, and you are sure you have good compression, it would have to be a broken distributor.
The distributor is driven off the cam.

Apr 20, 2013 | 1997 Acura CL

1 Answer

Firing diagram


Thanks for using FixYa.com

For the 1998 Acura Integra Type R 1.8L DOHC In-Line 4-Cylinder:

Firing Order:
1 - 3 - 4 - 2
Cylinders:
______(back)________
'...4......3......2.......1...'
..........(front)
Distributor:
........1
......................3
..............o
.....2
.....................4

Let me know if this helped, or if you have additional information or questions feel Free to contact us at FixYa.com!

Aug 28, 2010 | 1998 Acura Integra Type R

1 Answer

1991 acura integra no spark. some times it start, other times it doesnt. i changed the coil & spark plugs. still getting the same problem


You could have bad module in the distributor. It is a common problem on Acura/Honda cars of this age. Rockauto.com carries entirely new distributors for the price of a rebuilt over the counter. All rebuilts recycle the module.

Jan 02, 2010 | 1991 Acura Integra Hatchback

1 Answer

1995 acura how do u set the vals and timming


First you will need a service manual or information for this vehicle for the valve lash setting. The procedure is usually removing the valve cover( You will need a new valve cover gasket) putting the # 1 cylinder on top dead center and using wrench, screw driver or allen key,and a feeler gauge. You will need to follow the firing order when adjusting the valves. You will need a timing light to set the timing and also the timing spec. This usually involves warming engine to normal operating temp. clean harmonic balancer and mark the timing mark with some white paint loosen the the distributor hold down bolt hook up timing light and turn distributor until the timing mark on the balancer lines up with the timing mark on the timing cover then tighten the holding bolt back down. Also the timing advance has to be disabled when setting the timing and enabled when you are done. The valves should be set first then set the timing. A Haynes manual available at your local auto parts store should contain pictures and information to help you do this.

Nov 21, 2009 | 1998 Acura TL

1 Answer

How to advance ignition timing on acura legend


When a car has a distributor, loosen the clamp under the distributor and turn the distributor clockwise/counter-clockwise to ge the appropriate timing. There is usually 1 bolt holding the clamp tight against the distributor. Determine which direction you need to turn with the timing light as your guide. As alway's, be careful of the moving parts!!

Oct 15, 2009 | 1989 Acura Legend

1 Answer

98 acura integra stops running while driving then needs to sit for a few hours before it will start again.the engine tries to turn but won't quite kick in the car seems to do this fairly often


Hi,
most likely cause is a faulty crank sensor if fitted to the engine block or in the distributor depending on which engine,worth plugging in to code reader to be 100%.

Jul 15, 2009 | 1998 Acura Integra Type R

2 Answers

Distributor pinout diagram...


go to autozone.com and you will be hable to buy a progam called alldata just for your car.

May 27, 2008 | 1998 Acura CL

Not finding what you are looking for?
1998 Acura Integra Type R Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...