Question about 2000 Audi A4

Open Question

Dash clock how to change date and time

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How doI set the clock


Setting the Time (Without Date Display) If your vehicle has an AM/FM base radio with a single CD player and preset buttons numbered one through six, the radio will have a clock button for setting the time. You can set the time by following these steps: 1. Press the clock button until the hour numbers begin flashing on the display. Press the clock button a second time and the minute numbers will begin flashing on the display. 2. While either the hour or the minute numbers are flashing, turn the tune knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. Instead of using the tune knob, you can also press the SEEK, FWD (forward), or REV (reverse) buttons to adjust the time. 3. Press the clock button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing will stop after five seconds and the current time displayed will be automatically set. To change the time default setting from 12 hour to 24 hour, press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the clock button again to apply the selected default, or let the screen time out. Setting the Time (With Date Display) If your vehicle has a radio with a single CD player or a CD with DVD player, the radio will have a clock button for setting the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the clock button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) will appear on the display. 220 3. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. If your vehicle has a radio with a six-disc CD player, the radio will have a MENU button instead of the clock button to set the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the MENU button. Once the clock option is displayed. 3. Press the pushbutton located under that label. The HR, MIN, MM, DD, YYYY will appear on the display. 4. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the MENU button and then the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. 221 To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year, follow these instructions: 1. Press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) are displayed. 2. Press the pushbutton located under the desired option. 3. Press the clock or MENU button again to apply the selected default, or let the screen time out

Nov 10, 2016 | 2007 Pontiac Torrent

1 Answer

How do I change my i30 clock to 24hr


Try the owners manual?

I don't know what your dash layout is but you must be able to set the clock time.

If the clock display is in the hooded centre dash panel press set for more than one second to enter clock/date menu then press set briefly to move through the settings. Try pressing H and M at the same time to change from 12 to 24 clock.

Aug 16, 2016 | Cars & Trucks

1 Answer

How do i change the time and date on citroen xsara piccasso o2 model ?


look at the dash board in front of you the left button where the speedo is push and hold clock will flash use the right hand stalk to rotate the time and date

Oct 18, 2014 | 2001 Citroen Xsara Picasso

1 Answer

After battery change on my 2001 avalon the time/date reset to default even I set the time/date correctly then turn off the ignition and turn back on again then the time/date reset to default again .


If some connections were changed then the ALWAYS ON +12 volt to the clock circuit back up is not powered all the time . check if while the battery was changed if there was any link that was disconnected that is the continuous supply to the clock.

Jul 02, 2011 | 2001 Toyota Avalon

1 Answer

How do you change the clock on a 2009 Chevy cobalt.


Setting the Clock Without Date Display AM/FM Base Radio with a Single CD Player
To set the time:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press until the hour begins flashing on the display. Press a second time and the minute begins flashing on the display.
  3. While either the hour or the minute numbers are flashing, turn to increase or decrease the time.
  4. Press again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set.
To change the time default setting from 12 hour to 24 hour, press the button until 12H or 24H is displayed. Once 12H or 24H is displayed, turn the knob to the desired option to select the setting. Press the button again to apply the setting, or let the screen time out.
With Date Display Radio with CD (MP3) and USB Port, and Radio with Single CD (MP3) Player
To set the time and date:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.
  3. Press the softkey located below any one of the tabs that you want to change.
  4. To increase the time or date do one of the following: • Press the softkey located below the selected tab. • Press SEEK, or FWD. • Turn clockwise.
  5. To decrease the time or date do one of the following: • Press SEEK or REV. • Turn counterclockwise.
The date does not automatically display. To see the date press while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
  1. Press and then the softkey located below the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays.
  2. Press the softkey located below the desired option.
  3. Press again to apply the selected default, or let the screen time out.

Nov 21, 2010 | 2009 Chevrolet Cobalt

1 Answer

How to reset the clock on dash


I'm thinking that your talking about the VIC is the Vehicle Information Center... Its the display unit between the radio & the ashtray.

You have to hold the "set" button while the time/date is displayed. Use the set button to change each section, then select to cycle through.

Hope helps with this.

Feb 04, 2010 | 1993 Jeep Grand Cherokee

1 Answer

How can i reset the time & date on audi A6 quattro 2002


I HAD A AUDI A4 2004 AND TO SET THE CLOCK YOU PRESS THE MODE BUTTON ON THE DASH THEN PRESS + OR -- TO SET THE RIGHT TIME OR DATE.....I RECKON THEY ARE MOSTLY ALL ALIKE

Jul 27, 2009 | 2002 Audi A6

1 Answer

Change date & time in the computer BMW530i 2002


If you also have the analog clock in your gauge cluster change the time on it first and the computer shoul set itself after you have changed the time on the analog clock.

Jul 07, 2009 | BMW 530 Cars & Trucks

1 Answer

'83 280zx Digital Clock resets randomly


you have a loose wire in the dash.

Jun 28, 2009 | 1983 Nissan 280ZX

1 Answer

Reset the clock on 2001 Audi A6


I HAVE A AUDI A4 2002 AND TO SET THE CLOCK YOU PRESS THE MODE BUTTON ON THE DASH THEN PRESS + OR -- TO SET THE RIGHT TIME OR DATE....HOPE I WAS OF SOME HELP TO YOU....

Feb 15, 2009 | 2001 Audi A6

Not finding what you are looking for?
2000 Audi A4 Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...