Question about 2002 Mercury Mountaineer
It first started to just flash and go off then it stopped and would illuminate soon as the vehicle would start up. It is a 2002 mercury mountaineer 4.6l awd SOHC V8 build date 06/02
This is probably a seat sensor but it could be the pretensioners or the air bag. When the vehicle is started, there is a sensor test that is run on the SRS (air bag) and if it finds something wrong, the light comes on. Given that this is a life safety device and there are hazardous parts in it, you should take it to a dealer to have it worked on.
Posted on Mar 24, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
IIRC these are a coil over design. meaning the coil is over the plug. the coil should have one 8mm bolt holding it on the lower intake manifold. remove the coild to get to the spark plugs. look by the fuel injectors, coil should be just next to it or very close. coil usually says motorcraft on it and circle in design.
Posted on Feb 09, 2009
It means that your airbag system is not fully functioning and you need to have the dealer check it out. Whenever the airbag light stays illuminated after starting the vehicle, it means that there might be a problem with the air bag system and a check up is needed ASAP to make sure the system will operate properly in the event of an accident. It could be a faulty sensor, or it could be that a wire or connection is loose, etc., in any case, the dealer will need to check the airbag system to determine what the problem is.
I had a situation where an stereo installer had probed the wires in the airbag system and that caused the system to become non-functional, due to having voltage applied to the airbag wiring where it shouldn't have any voltage. It was an expensive fix, as he'd actually stripped the wires bare and he crossed several. Cost him a bunch to replace the wiring harness on my new vehicle.
Posted on Jul 13, 2009
The BRAKE LIGHT SWITCH needs to be Readjusted, Simply Move it Closer to Pedal Arm to Adjust. There is a NUT that you must Turn to do this. If you take a Good Look at it it is SELF EXPLANITORY.
I Hope this Helps , Well I Know it Will as it5 is OBVIOUS as to what the Problem is. Have a Good Day
Posted on Sep 27, 2009
Tips for a great answer:
Sep 10, 2016 | 2003 Mercury Mountaineer
Jan 02, 2014 | 2003 Mercury Mountaineer
Jan 10, 2010 | 1999 Mercury Mountaineer
Jan 09, 2010 | 1999 Ford Explorer
Sep 15, 2009 | Pontiac Grand Prix Cars & Trucks
Jul 13, 2009 | 2002 Mercury Mountaineer
Mar 29, 2009 | 1999 Ford Explorer
Oct 13, 2008 | 1997 Mercury Mountaineer
Aug 14, 2017 | 2002 Mercury Mountaineer
189 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: