Question about 2007 Audi S6 Sedan

1 Answer

Audi voice recoGnition

When I press the voice recognition button is beeps with a message on the screeen saying paused and then it goes back to playing radio etc after a about 2 seconds so I cannot use the cvoice recognition system

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Audi Master
  • 1,013 Answers

There are certain times it won't let you use voice recognition, like when you're backing up or before the system has initialized (takes about 20 seconds after you start the car. Have you tried it outside of these instances?

Posted on Apr 08, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

noranda21
  • 1547 Answers

SOURCE: when I press the voice

http://www.iamaudi.com/setting-up-bluetooth-iphone-with-audi/

Posted on Dec 03, 2010

  • 1 Answer

SOURCE: Audi A8L MMI Car Button Reboots

Had a similar problem on my 2006 A8L
It appears that "Car" botton got stuck in pressed position due to some sand getting between buttons, another time it was "Nav" one.
After minor cleaning, and popping button back to normal position, works fine.

Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our sportage has bluetooth but not voice recognition. Does the sound right to you?


Doesn't sound wrong but I suggest you check with your dealer after reading the vehicle handbook.

Oct 06, 2015 | 2009 Kia Sportage

1 Answer

Why does my Traffic Sign Recognition display of speed limit disappear before I reach next traffic sign


What device are you useing, you might need to update your maps maps contain the new speed limits

Feb 18, 2015 | Cars & Trucks

1 Answer

2015 Altima voice recognition does not call up proper voice tag


learn to speak japanese english so your car understands.

Feb 03, 2015 | Cars & Trucks

1 Answer

Gear shift stuck in neutral when moving to park


1st check your shifter linkage-does the indication coincide with your gear recognition display in instrument cluster? most liley if it is not the linkage the gear recognition swith inside your shift box is defective-usually they get soda or coffee spelled on them and malfution. I would recomend having you car scanned for codes.

May 20, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

Uconnect has stopped working completely. will not activiate.


when i press the voice recognition button or the the phone button on my steering nothing works not even sound

May 07, 2009 | 2006 Jeep Grand Cherokee

2 Answers

Voice Activation


I have a 2006 A8 and if you need help with the command say "help mmi" or when you are in one of the following modes: radio, CD, or Navigation. you can say "help ." This should provide you with all the commands the voice command can understand.

Dec 27, 2008 | 2006 Audi A8

1 Answer

Why does my key fob only open drivers door


this how a dealer does it:
DOOR CONTROL TRANSMITTER
REGISTRATION
1. REGISTRATION OF RECOGNITION CODE
HINT:
 The add mode is used to retain the already registered codes while registering a new recognition code.
This mode is used when adding a transmitter. If the number of the registered codes exceeds 4, the previously
registered code will be correspondingly erased in order, starting from the first registered code.
 The rewrite mode is used to erase all the previously registered codes and register only new recognition
codes. This mode is used when exchanging the transmitter or the door control receiver for new one.
 The prohibition mode is used to erase all the registered codes and cancel the wireless door lock function.
Use this mode when the transmitter is lost.
 The confirmation mode is to confirm how many recognition codes have already been registered before
an additional registration of a recognition code.
 All the following registration procedures must be performed in order continuously.
(a) The vehicle should be in the following conditions.
(1) The key is not inserted in the ignition key cylinder.
(2) Driver’s door is OPENED. (The other doors are CLOSED)
(3) Driver’s door is UNLOCKED.
(b) Perform the following operations to select the desired mode.
(1) Insert and remove the key from the ignition switch twice within 5 seconds.
(2) After the above operations, close and open the driver door twice within 40 seconds. Then insert the
key into the ignition key cylinder and remove it.
(3) After the above operations, close and open the driver door twice within 40 seconds. Then insert the
key into the ignition key cylinder and close the door.
(4) Turn the ignition switch from LOCK to ON and back to LOCK at approximately 1 second interval 1
to 5 times to select a mode.(2 times for rewrite mode) Then remove the key from the ignition key cylinder.
(5) After selecting a mode, the integration relay automatically performs the power door
LOCK-UNLOCK operation within 3 seconds to inform the selected mode.
(c) Register the new recognition codes :
(1) Within 40 seconds after the add mode or the rewrite mode has been selected, press the LOCK and
UNLOCK switches on the transmitter switch simultaneously for 1.0 - 1.5 seconds.
Within 3 seconds after the previous operation, press either one of the switches for more than 1.0
seconds.
(2) Within 3 seconds after the transmitter switch has been turned OFF, the LOCK-UNLOCK operation
will be automatically performed once if the registration of the recognition code of the transmitter is
completed correctly. In case the LOCK-UNLOCK operation is performed twice, the registration of
recognition code has failed. Perform the registration procedure from the beginning once again.
(3) If the multiple transmitter to be registered, repeat step (c) within 40 seconds after the previous registration.
this is why the dealer charges for this

Jun 19, 2008 | 2003 Mini Cooper

Not finding what you are looking for?
2007 Audi S6 Sedan Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14337 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...