Question about 2006 Subaru Impreza
This newer model blower motor area seems to be connected to something else on the left and I want to remove the blower without removing unscrewing and unclipping things that don't need removal. Where are the screws to take it down and will the dash have to be taken off?
There is no dash removal required. There is an internal vent system that has a small 1/2 inch air return to the brush area in the motor. All you have to do is drop the screws on the bottom of the unit and it should come out. I usually wait to get it loose to see what kind of electrical connections are present. There is one electrical connection but it is a locking connection.
Posted on Mar 24, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
IF the bulb is the only part you need to replace, Where the wires for the bulb are there is a large plastic ring that just 1/4 turns to release the bulb. Do not touch the bulb with your fingers. Just unplug the bulb and replace with new one then reinstall and 1/4 turn to seat it again. There are no screws to remove for the bulb replacement. Sometimes the local auto stores will do it for you. Advance Auto here will put them in for you. Good luck and have a great day.
Posted on Mar 29, 2009
u need to remove small rubber dust cover from back side of brake backing plate. then with a sturdy but small screwdriver,thru this hole, u need to locate auto adjuster plate inside drum, u push small driver against this so it is pushed off the adjuster cam, then with flat screwdriver, or adjusting tool, at same time as u are holding adjuster plate, back off adjuster wheel as far as it will go this is akward to do, but brakes need to be backed off to enable drums to be removed drums wear and develop a lip on edge u should then be able to slide drum off. if still hard tap with a hammer while pulling drum
Posted on Jul 03, 2009
First you remove the small triangular shaped plastic piece that is on top of the door panel by the front of the door by the mirror by simply prying it of. Next behind the door open lever if there is a small plastic cover remove it under it will be a screw. Next your window switch will just pry up and out, disconnect the wiring, under the switch there will be a screw ataching the door panel to the door. Next on the face of the door panel if there is a small cover about the size of a nickle but elongated, remove the cover and remove the screw below it. Next pry the door panel from the bottom untill it "pops" out and grab it and pop the rest of the panel out, lift the panel up off of the window ledge.
Posted on Aug 28, 2009
yes that is correct, remove glovebox , metal bracket in front ( mark which way round this bracket goes it will go back wrong and glove box wont fit ) , unplug electrical plug from heater motor, unscrew 3 bolts/screws from motor replace in reverse..30 min tops..
Posted on Nov 15, 2009
pull the cup holders up gently and it should pop out aroundthe gear. u can now pull on the gearstick surrounds and it should pop out. undo the 2 screws under the air con controls and then pull on it until it pops out. now u can undo the 6 screws around the stereo and take it out
Posted on Dec 05, 2009
Tips for a great answer:
Jul 16, 2015 | Subaru Cars & Trucks
Dec 06, 2013 | 2007 Subaru Impreza Outback Sport Wagon
Jan 07, 2013 | 2004 Subaru Impreza
Oct 02, 2012 | 1993 Subaru Impreza
Apr 18, 2011 | 2006 Subaru Impreza
Nov 30, 2009 | 2002 Subaru Impreza
Apr 08, 2009 | 1995 Subaru Impreza
Feb 27, 2009 | 1995 Subaru Impreza
Jan 01, 2009 | 1995 Subaru Impreza
127 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: