Question about 1997 Mazda Protege

2 Answers

Headlights low beem headlights dont work all other lights work

Posted by Anonymous on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wire connector at the headlamp is corroded my need replacement soldered on

Posted on Mar 26, 2014

  • topherknudso
    topherknudso Mar 26, 2014

    bad bulbs or fuse

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check the fuses.

Posted on Mar 24, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 gmc canyon truck passange side low beem replaced and still not working


Check to make sure the fuse is not blown. The fuse for the low beam and high beam headlights are in the fuse block under the hood. Each light has its own fuse.

Nov 07, 2014 | 2010 GMC Canyon Regular

1 Answer

The headlight on the pass. side works right. the drivers side when in low beem, the light is in high beem. when the light is on high beem the light is on low beem. this is a 2000 mercury sable


someone has switched the wiring harness sockets to the wrong bulbs or installed the bulbs in reverse. get in behind the headlight assembly on the driver side and reverse the wires, if that does not work then pull the bulbs and swap them inside to outside and vice versa.

Jun 10, 2011 | Mercury Sable Cars & Trucks

1 Answer

My 1997 cavaleir headlights will only work on high beems but will not work on low beems why?


There is a good chance the low beam side of headlamp bulbs are both bad,I have seen this happen a few times.

Nov 21, 2010 | 1996 Chevrolet Cavalier

1 Answer

I have a 1997 F-350 with a 7.3 and lately while I am driving my headlights only turn off and some times I can push the switch in one click and then pull it back out and the lights come back on, other times...


Sounds like the contacts in your switch are going bad. The switch in your high-low beam lever is extremely hard to get to as the steering column will need to come out, if it's the style I recall on a 97. The switch you may be able to find on the web somewhere because if you get it from ford it may be pricey. You will probably need to take it to your local service center to be replaced.

Nov 17, 2010 | Ford F-350 Cars & Trucks

1 Answer

Low beems dont work


CHECK THE HEADLIGHT RELAY SWITCH. USALLY LOCATED UNDER THE BIG BLACK BOX ON THE INNER DRIVERS SIDE FENDER.

Dec 15, 2009 | 2002 GMC Envoy

1 Answer

All lights work but my headlights dont, I can pull back on the high beems they work but when I try my head lights they do not.started out they where on and then went out,checked the fuse it looked good


If you have an AUTO off/on/delay this could be malfunctioning, you may also need a need headlight switch however, First check your low beam halogen bulbs if they are bad replace BOTH at the same time they tend to fail at a similar time and this is the least costly repair NOTE wen changing these do not touch bulb with bare hand as oils from your skin can cause the to heat unevenly and explode inside your headlight assembly Use rubber gloves most Parts stores have these available for this reason

Jul 05, 2009 | 2003 Mercury Grand Marquis

1 Answer

L head light low beem not working


You probably have the low side of your bulb blown check the bulb if that dont fix it ck your conector.if your dimmer switch was bad it wouldnt work on eather side. I will try to get you a diagram for the fuse box. PHIL.

Jan 06, 2009 | 2003 Ford Explorer

1 Answer

Problem with lights


It sounds like the headlight switch has gone bad and will need to be replaced.
038b663.jpg

Dec 09, 2008 | 1998 Mitsubishi Eclipse

1 Answer

Head Lights


check the continuity of the headlights to make sure there switching from the DTR Lights to the highbeams. If you are not getting the proper continuity check the ground wire for the low beams to ensure its properly grounded and has proper continuity throughout the wire. If not replace the wire or tighten as required and that should fix your problem.


lemme know if you require further assistance,

thanks - Nate

Aug 13, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1997 Mazda Protege Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...