Question about 1995 Jeep Wrangler

1 Answer

1995 jeep yj 5 speed AX-5

Had it rebuilt 600 miles ago and was not but is now leaking gear oil cant seem to find anything loose but still leaks any clues

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 279 Answers

Where are you seeing the oil leaking from? Remember that gravity will cause the oil to drop down. The wind will also cause the oil to blow back while you drive. Look for the forward most and top most areas that are covered with oil. Common leak areas are the front oil seal (oil will look like it's coming from the bell-housing. Another common leak is the shifter plate gasket, just below the shift lever. Oil will be found draining from this area. I have also seen shoddy mechanics use the wrong bolts to hold the rear housing onto the main housing of the transmission. If the bolts used are to short, oil will leak between the main housing and the tail-shaft housing. Charlie

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Oil leak. Have changed rear main seal, oil pan gasket, valve cover gasket. Any other ideas?


we learn
It is a 1987 jeep yj with a 4.2 engine and it is a stick shift.
we learn this is 3rd party question, poster not doing the work,... matters big time on answers...

ah the 4.2 with that funky electronic carb. not fun that... not ever....(the only bad jeep made)

leaks?where... ok later,, right side (usa passenger) front. of block.

leaks are hard. there are only 2 ways to find a leak.
( besides the shot gun methods) ouch

1: clean clean it spot less. drive 10 miles, bingo cause.
2: insert UV dye to oil filler, drive 10 miles. using UV lamp with kit bingo.

there is no other way..

leaks have degrees. some are best ignored. (unless rich)
I cant see it so cant advise. (is oil levels dropping weekly)

wow changed the most hard seal first. now that is brave....

the trans is stick NO A/T here nor AFT fluids
flying out the cooler line right there.

keep on mind wind and gravity moves oil to where IT wants not you. big time.
is the fuel pump port leaking
cam gear cover gasket
head gasket
or distributor leaking oil from any of 3 places?
valve cover gasket leaks, or was over-torqued and not all do like that.
get it clean and you will find the leak
and drive it, sure, some dont leak just idling
rare but true.

605e5e46-05d9-4021-9329-71ca9836afe7.jpg

Aug 29, 2015 | Jeep Cars & Trucks

1 Answer

What kind of fluid does a 5 speed transmission take in a 1994 jeep wrangler


Transmission (standard):
- 80 weight gear oil but most recomend Redline MT 90 to protect the interals better. 75W90 is listed by some but the 80W is just cheaper to find with no ill effects.
AX-5 = 3.3 quarts
AX-15 = 3.25 quarts
BA-10/5 = 2.45 quarts

Apr 13, 2013 | 1994 Jeep Wrangler

1 Answer

I cant put on gear when I start the engine.


Check the clutch master cylinder, the line to the slave cylinder on the bellhousing and the slave for leaks. If fluid is low there is a leak. Master can "bypass" as well similar to a brake master in which case it wont leak but the slave won't move when the clutch is applied. If that system is working then the clutch likely has worn out.

Jan 09, 2010 | 1989 Jeep Wrangler

1 Answer

95 wrangler yj. has no power at high speeds


Have you had fuel pressure tested, and/or filter changed. Have you checked for plugged exhaust, such as catalytic converter? Quite often engine will also run a little hotter than normal when exhaust is plugged.

Nov 05, 2009 | 1995 Jeep Wrangler

3 Answers

Looking for Service Repair Manual Jeep Wrangler YJ


i have a 1988 jeep wrangler 6cyl with 5 speed transmission. I was shifting the jeep and it got stuck in third gear. We opened it up and saw that the linkage is aligned and everything is in place. I dont know what is wrong and what to do next. please help ....

Jul 10, 2009 | 1992 Jeep Wrangler

1 Answer

JEEP oil leak


your oils sending unit is leaking the part is not expensive,

Jun 29, 2009 | 1990 Jeep Wrangler

2 Answers

Where can i find the transmission model number for my 95 jeep grandcherokee lerado the transmission is not original it has been replaced with a diferent one 2 times so just need to know where to find the...


These pages cover the transmissions used in Jeeps over the years. Transmissions are arranged by the most recently introduced transmissions first.
Factory Transmissions 45RFE: The 45RFE four speed automatic transmission was used in 1999 Jeep Grand Cherokees with 4.7L engines. 46RE: The 46RE four speed automatic transmission was used in 1998 Jeep Grand Cherokees with 5.9L engines.
44RE: The 44RE four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee's with 5.2L engines.
42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.
46RH: The 46RH four speed automatic transmission was used in 1993 to 1995 Jeep Grand Cherokees with 5.2L engines.
32RH: The 32RH three speed automatic transmission was used in 1992 to 1995 Wrangler with 4.0L engine and it continues to be used in 1997+ Wrangler with 4.0L engine.
30RH: The 30RH three speed automatic transmission was used in 1992 to 1995 Wrangler & 1992 to 1996 Cherokee with 2.5L engine.
AW4: The AW4 four speed automatic transmission was used in 1987 to 1990 Jeep Cherokee (XJ), & Jeep Comanche with 2.5L & 4.0L engines. The AW4 was also used in 1987 through 1992 Jeep Comanche & 1991 through 1998 Jeep Cherokee & 1993 through 1993.5 Jeep Grand Cherokee with 4.0L engines.
AX-15: The AX-15 is a medium duty 5 speed manual transmission. It was introduced in mid 1989 in YJs with the 4.2L engine and XJs and MJs with this engine. The first year of the Grand Cherokee (ZJ), the AX-15 was rare option only with the 4.0L engine. The AX-15 is still used in TJs and XJs with the 4.0L engine.
AX-5: The AX-5 (and AX-4, the non-overdrive version) is a light duty 5 speed manual transmission. It was used in all Wranglers from 1987 equipped with the 2.5L I4 engine. It was also used in Cherokees (XJ) and Comanches (MJ) with the 2.8L V6 and 2.5L I4.
BA10/5: The BA 10/5 is a light duty 5 speed manual transmission. It was used in all 4.2L equipped Wranglers (YJ) from 1987 to mid-1989, and all 4.0L Cherokees (XJ) and Comanches (MJ) for the same years.
T-5: The T-5 is a light duty 5 speed transmission used in CJs from 1982 until 1986. It was also found in some 84-85 Cherokees (XJ).
TF727: The TF 727 is a heavy duty 3 speed automatic used in full sized Jeeps (SJs and J series pickups) from 1980-1983. From 1984-1992 the 727 was only used in these trucks with the AMC 360 V8.
999: The 999 is a medium duty 3 speed automatic used in CJs from 1980-1986. It was also used in 1984-1990 SJs and J pickups with the 4.2L engine, in the YJ from 1987-1991 with the 2.5L and 4.2L engine, and in the XJ and MJ through 1986.
904,909: The 904 and 909 are light duty 3 speed automatic used in CJs from 1980-1986 only with the I4 engine. It was also used during this time period with XJs and MJs with the I4 and V6 engine. The 909 is a 904 with a lock-up torque converter.
SR-4, T-4: The SR-4 and T-4 are light duty four speed manual transmissions used in CJs from 1980 until 1986.
T-176, T-177, T-178: The T-176, T-177, and T-178 are a medium duty four speed manual transmission used in Jeep CJs, SJs, and J pickups from 1980-1986.
T-150: The T-150 is the 3 speed manual transmission that was used in CJs from 1976 to 1979.
T-18: The T-18 is a heavy duty four speed used in Jeeps from 1971 until 1981. It was only used in the CJ from 1971-1979.
T-15: The T-15 was used only in V8 equipped CJs and Jeep trucks from 1972 to 1975.
TH400: The TH 400 is a heavy duty three speed automatic that was used in CJs with the BW 13-39 transfer case from 1976-1979. The TH 400 was also used in full sized Jeeps (SJs and J series pickups) from the late 60s until 1979.
T-14: he T-14 is a three speed transmission used with the "Dauntless" Buick V6 and AMC I6 from 1967 to 1975.
T-86: The T-86 is one of the three speeds used with the many CJs and Jeepster Commandos with the "Dauntless" Buick V6.
T-98: The T-98 varies only slightly from the T-18. It was used from the 50s until 1970 in different Jeeps.
T-90: The T-90 was the standard three speed for CJ and their military counterparts built from 1945 until 1971. It was also the standard transmission for Willys Wagons, Willys Pickups, FC trucks, and Jeepster/Commandos during this time period.
T-84: The T-84 is a light duty three speed used in MBs and GPWs during WWII

Good luck!!!

Jun 26, 2009 | 1995 Jeep Grand Cherokee

1 Answer

2002 dodge diesel 2500 5 Speed....... Clutch will


if master cylinder and slave cylinder.is good and have brake fluid is in system and no leaks.problem is in the clutch and pressure plate.

Jun 10, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

1992 YJ can only shift into 3rd & 4th gear. No Reverse


The same thing happend to one of my wranglers, a 95 yj 4cyl 2.5 liter. The "Aisin AX-5" is the transmission that jeep used on the yj and tj 4cyl and 83 cherokee and up 4cyl, and the "Aisin AX-15"was used on some of the 6cyl models. Both are a "light duty" transmission according to the transmission manufacturer. As everyone knows, A jeep is no light duty vehicle, the shifting slider, a fork like item slides the gears back and forth over the drive and output gears to change the gears. and with heavy use or lack of maintanice they can break, they also can break cause of the cheap casting they used in the tranny. Other problems happen in those trannys too. The only thing is to tear the tranny apart and find out what failed and replace. I did this on the kitchen table ofer a day off. being the up own an early 90s yj, If you are one who doesn't work on their own car, I would find a good garage that is good with jeeps, they are not to expencive to fix, and when they are taken care of, will be a joy to own.
I hope this helps, Jeep ownership is a great thing.

Feb 11, 2009 | 1992 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...