Question about 2004 Dodge Ram 1500

Open Question

2004 dodge ram 1500 wont go into gear p0700 and p0755

Has new trans filters and a new solenoid pack

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: RAM 1500 OBD CODE p0700/p0740

I had the same problem and a friend suggested that I get a filter kit for the transmission. My dodge ram 1500 stopped pulling and had to be towed home. I got a filter kit for the transmission and now the truck is runniing good again and the transmission is shifting ok.To get the code off by going to
Auto Advance and used their code reader to erase the code. My truck has 249K on it and I know the trans will not last forever, but as long as it is running ok. I will live with the codes but make sure the trans fluids are changed every 10k.

Posted on Dec 05, 2008

  • 3 Answers

SOURCE: 2000 Dodge Sratus 4 speed auto transmission

Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.

Posted on Jan 08, 2009

wracefans24
  • 1985 Answers

SOURCE: 1998 dodge ram 1500 2wd 5.9 eng. how to change

just drop the transmission pan to drain it and the filter is right there in the valve body,DON'T mess the band adjustment,they are only to stop the planetary gears so you can go into reverse,there is no such thing as adjusting bands! that went out with the fifties!

Posted on Jan 10, 2010

  • 52 Answers

SOURCE: dodge ram 1500 2001 codes coming up 0753 1757 1762

0753 is shift solenoid A, electrical problem.as for the other codes they should start with a zero not a one. if they started with a 0757 that means shift solenoid B,stuck in on position. 0762 means shift solenoid C,stuck in on position. 0765 means shift solenoid D,malfunction

Posted on Feb 15, 2010

  • 4044 Answers

SOURCE: 2004 Dodge RAM 1500 Check

P0700 Transmission Control System Malfunction

Posted on Oct 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I get code p0700 on 2004 dodge ram 1500 4.7 lt.


transmission system malfunction can be a few things the following links give some examples of different problems associated with p0700 code but more than likely if their is a noticeable problem than may have to have it diagnosed by a transmission shop
P0700 Transmission Control System Malfunction P0700 Dogge Ram Yahoo Video Search Results 2005 Dodge Ram 1500 transmission codes p0700 p0841 Transmission Automatic...

Aug 05, 2016 | 2004 Dodge Ram 1500

2 Answers

Codes P1782, P0755, and P0700


P1782 DODGE - 2/4-OD Pressure Switch Circuitxicon.jpghttp://engine-codes.com/p1782_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted
Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission shift shockP1782 DODGE Description The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.
P0755 DODGE - 2/4 Solenoid Circuitxicon.jpghttp://engine-codes.com/p0755_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4 solenoid valve
- 2/4 solenoid valve harness is open or shorted
- 2/4 solenoid valve circuit poor electrical connection
P0700 DODGE - Transaxle Control System Malfunctionxicon.jpghttp://engine-codes.com/p0700_dodge.htmlForum CodePossible causes- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Jul 26, 2012 | Plymouth Breeze Cars & Trucks

1 Answer

Hello, have a 2003 Dodge Intrepid SE - 2.7L with 42LE Transmission - just replaced the solenoid pack and OD-UD, LR accumulators-new filter gasket and fluid - now it's giving me OBDII codes P0700 (


It sounds like you have a handle on this but I will ask the dumb question, are you coating the orings with petrolium jelly or trans assembly jelly? As far as the codes go, you might have a bad ECM. That mmany codes all at once seems suspect.

May 31, 2012 | 2003 Dodge Intrepid

3 Answers

What does these codes mean P1781, P0731, P1784 AND P0700 AND HOW DO I FIX THEM.


p1781 is manufacturer control transmission, p0731 is gear 1 ratio incorrect, p1784 is manufacturer control transmission, p0700 is trans, control system malfunction. all of these codes refer to tranny.This code normally points to a faulty transmission control module, but this is an expensive part and you should have an experienced Dodge technician diagnose the problem first. or a transmission specialist. the other codes are probably associated with the p0700 code. have a good day !

Apr 27, 2011 | 2001 Dodge Grand Caravan

1 Answer

I have a 2000 Dodge stratus and the check engine light just came on. I had it checked and I got code P0700 and P0755. The report says transaxle control system failure and solenoid circuit fault. What does...


inside the trans there are selonoids that control the shifting. they may need to be replaced or you have a wiring problem. another thing you might try having the trans serviced. have the codes cleared and drive the car to see if the codes come back. hope this helps.

Apr 22, 2010 | 2004 Dodge Stratus

1 Answer

Dodge ram 1500 2001 codes coming up 0753 1757 1762 1765 trans not shifting proper trans in drive wont shift to lower gears automaticly


0753 is shift solenoid A, electrical problem.as for the other codes they should start with a zero not a one. if they started with a 0757 that means shift solenoid B,stuck in on position. 0762 means shift solenoid C,stuck in on position. 0765 means shift solenoid D,malfunction

Jan 20, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2003 Dodge Ram 1500 computer codes P0304- cylinder 4 misfire, how do I fix this? P0700- Transmission Control System Malfunction, how do I fix this?


P0304, could be a bad plug, bad coil, bad injector, low compression, or other stuff. The P0700, you need to look at codes in the TCM. It is telling you that the trans computer has a fault in it.

Jun 13, 2009 | 2004 Dodge Ram 1500

1 Answer

2000 Dodge Sratus 4 speed auto transmission


Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.

Dec 16, 2008 | 1995 Dodge Stratus

1 Answer

RAM 1500 OBD CODE p0700/p0740


I had the same problem and a friend suggested that I get a filter kit for the transmission. My dodge ram 1500 stopped pulling and had to be towed home. I got a filter kit for the transmission and now the truck is runniing good again and the transmission is shifting ok.To get the code off by going to
Auto Advance and used their code reader to erase the code. My truck has 249K on it and I know the trans will not last forever, but as long as it is running ok. I will live with the codes but make sure the trans fluids are changed every 10k.

Oct 04, 2008 | Dodge Pickup Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...