Question about Toyota Tacoma

1 Answer

Toyota tacoma stuck in 4 wheel drive ( but just the front drivers side hub/wheel

My truck is stuck in 4 wheel drive. i recently put new wheels and tires on the truck and when i had it lifted in the air i spun both tires to check my hub clearance. the passenger side spun freely but the drivers side did not so i took the wheel of and spun the hub alone to see if it was the wheel or something more complex such as the 4 wheel drive or breaking system. the hub spins about a quarter turn and stops as if its in gear or the 4 wheel drive is engaged, but only on the drivers side. Vacuum line? cv joint or u joints? sure could use some advice. im new to the toyota world and wanting to gain more knowledge on the set up and schematics of these trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Toyota Expert
  • 179 Answers

I need to know the year and if your 4X4 is electronic or manual shifter.
Most older 4X4 Toyotas have manual hub lock.you will find on the hub lock and unlock positiontoyota tacoma stuck in 4 wheel drive ( but just th - 2013-09-15135605_zps8d906c79.jpg

Posted on Mar 23, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 94 Answers

SOURCE: 4 wheel drive not engaging

CHECK FOR VACCUM AT THE HUB IF YOU HAVE VACCUM THEN ITS SOMEWHAT COMMON FOR THE LOCKING HUB TO WEAR

Posted on Dec 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Toyota 4 runner 2 wd front wheel removal


Install front wheel bearing hub assembly on a ... - YouTube

? 8:42
https://www.youtube.com/watch?v=LQ-DGdt2J2U
Mar 11, 2014 - Uploaded by Andy Taylor
... Install front wheel bearing hub assembly on a 2003-2014Toyota 4Runner .... Pressing a 2005 and up Toyota Tacoma,4Runner, FJ Cruiser 2WD or 4WD ... How to Remove & Replace a Toyota 4x4 Manual Locking Hub ...
images for 99 Toyota 4 runner 2 wd front wheel removal

Nov 26, 2015 | Toyota Cars & Trucks

1 Answer

4 wheel drive in 1995 toyota tacoma


check that the transfer case is in 4wd and if you have free wheeling hub locks check that they are engaged

Dec 02, 2013 | 1995 Toyota Tacoma

1 Answer

1997 toyota tacoma will not go into 4 wheel drive


Has the transfer case ever been serviced? The fluid should be changed every 30,000 miles, if not the works can stick and cause engagement problems. Make sure the vacuum to the front hubs is available, if the front hubs are not locking the front drive shaft will turn but no Front wheel lock up and no 4 wheel drive is available.

Oct 05, 2012 | 1997 Toyota Tacoma

1 Answer

Dont know how to get the drivers side rotar off the truck!


Go to Autozone.com and enter your vehicle yr/mk/model and you will be able to view chiltons online manual for free.

Jul 16, 2010 | 1997 Toyota Tacoma

1 Answer

2001 4 x 4 tacoma front wheel fell off. Looks


The drive shaft is inserted into a splined hub. The hub has a bearing that is pressed in, and that may have been the cause.
Very rare. Was there any grinding noise before it fell off ?

Feb 26, 2010 | 2001 Toyota Tacoma

2 Answers

I have a 2000 4wd tacoma with manual locking hubs and the 4wd does not seem to be engaging after locking the hubs and shifting the lever into 4 hi or 4 low


Sounds like one of your hubs is sticking and not engaging. You can check them by engaging the hubs and the transfer case and jacking up each front wheel independently if it doesn't spin your good, if it does you found your problem. As far as fixing a hub goes, it may be just dry and need some grease, or there are some very good aftermarket hubs available from Warn.
Hope this helps

Dec 08, 2009 | 2001 Toyota Tacoma

1 Answer

2003 tacoma 4 wheel drive, seems that the hubs are stuck in 4 wheel


engage in 4low drive forward. disengage and drive back and forth a few times if this doesnt work bring to dealer

Jul 23, 2009 | 2003 Toyota Tacoma

1 Answer

1990 toyota 4runner 4x4 wont lock in front wheels


your drive shaft thats turning is mabe broke or your automatic 4x4 lockers could be bad

Feb 24, 2009 | 1990 Toyota 4Runner

1 Answer

Jeep YJ 1991 4 wheel drive


if u got automatic front hubs stop put in park pull 4x4 shifter into 4 wheel
manual hubs at front wheels turn the hub locks to the lock position and then pull the 4 wheel shifter inti 4 wheel
also look over drivers sun visor if the tag aint worn off the direction are there... have fun 4 wheeling and keep the rubber side down
rank, rate & vote for my solution

Dec 20, 2008 | 1991 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...