Question about Mitsubishi Carisma

Open Question

Mitsubishi Where i found intake air temperature sensor in the car?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 37 Answers

SOURCE: Can't locate Intake Air Temperature Sensor Connector

The IAT is integrated with the MAF (Mass Air Flow) sensor all one unit the following diagram should help
9b5bca8.jpg

Posted on Dec 06, 2008

tripletauto
  • 1450 Answers

SOURCE: Where is the intake air temperature sensor?

if you look in the air intake boot you should see a two wire sensor stuck in it. this is the iat. That being said i dont recommend the "chip" you are referring too all it does is make computer think it is cold outside all the time so it adds more fuel to engine this is were they claim the extra power. decreased mileage and decreased engine life.a programmer works much better.

Posted on Jan 16, 2009

c17hydro
  • 2984 Answers

SOURCE: intake air temperature sensor 02 hyundai elantra

Yes...it is also called the MAP-Manifold Absolute Pressure sensor...

a318db1.gif

Posted on Mar 31, 2009

  • 169 Answers

SOURCE: sensor locations

air intake look at snorkel it could be part of mass air flow check intake for eng coolant

Posted on Aug 29, 2009

jturcotte
  • 7710 Answers

SOURCE: my trouble code reads air intake temperature

according to autozone.com, The Intake Air Temperature (IAT) Sensor is integrated with the Mass Air Flow (MAF) Sensor, and is located on the inboard side of the air cleaner housing (#1 below).
0b2d2d0.gif

Posted on Oct 22, 2010

Testimonial: "thank you for your help! "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 Nissan Altima showing codes P0304,P0102,P0154,P0113 what are they and how do i repair the problems.


Hi Chris.

p0304 = Number 4 Cylinder Misfire Detected

Faulty spark plug 4
Clogged or faulty fuel injector 4
Faulty ignition coil 4
Fuel injector 4 harness is open or shorted
Fuel injector 4 circuit poor electrical connection
Ignition coil 4 harness is open or shorted
Ignition coil 4 circuit poor electrical connection
Insufficient cylinder 4 compression
Incorrect fuel pressure
Intake air leak

The P0304 code means that the cylinder 4 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 4.


p0102 = Mass or Volume Air Flow Circuit Low Input

Faulty mass air flow sensor
Intake air leaks
Dirty mass air flow sensor
Dirty mass air filter
Mass air flow sensor harness is open or shorted
Mass air flow sensor circuit poor electrical connection

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner.
Reset code and drive vehicle.
If the code comes back, it may be necessary to replaced the mass air flow sensor.


p0154 = O2 Sensor Circuit No Activity Detected Sensor 1 Bank 2

Faulty Front Heated Oxygen Sensor Bank 2
Front Heated Oxygen Sensor Bank 2 harness is open or shorted
Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

Replacing the Front Heated Oxygen Sensor Bank 2 usually takes care of the problem.


p0113 = Intake Air Temperature Sensor Circuit High

Faulty Intake Air Temperature (IAT) sensor
Dirty air filter
Intake Air Temperature (IAT) sensor harness is open or shorted
Intake Air Temperature (IAT) sensor circuit poor electrical connection

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.



Hope this helps
FYT

http://www.autocodes.com/make/nissan

Mar 26, 2017 | Nissan Cars & Trucks

1 Answer

Undefinedas replacement on civic 98 sensor p0113


Possible causes for this code are: - Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection. this code sets when: - An excessively high voltage from the sensor is sent to ECM. Usual Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P0113 1998 Honda Civic Description The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
27782.png

Sep 24, 2014 | 1998 Honda Civic

1 Answer

Location air temp sensor


Location of Intake Air Temperature Sensor:
The intake air temperature sensor, which is mounted on the mass air flow meter, monitors the intake air temperature. The intake air temperature sensor has a built-in thermistor with a resistance that varies according to the temperature of the intake air. When the intake air temperature becomes low, the resistance of the thermistor increases When the temperature becomes high, the resistance drops .

Apr 24, 2014 | 2009 Toyota Corolla

3 Answers

Where is the MAF sencor located on 2000 Galant


in the inlet air pipe from the air filter to the manifold

Dec 02, 2010 | 2000 Mitsubishi Galant

1 Answer

What color is the intale air temp sensor wire on a 2002 Mitsubishi Eclipse GT, 3.0L V6, 5spd manual?


There are two wires for the intake air temperature sensor.

The sensor is built into the Mass Air Flow sensor near your air filter.

Pins 5 and 6 (wire colors brown and red/blue respectively) of the MAF connector are for the air temp sensor; Pin 6 is the 5V reference voltage from the ecu, pin 5 is the return signal (ecu input).

Sep 09, 2009 | 2002 Mitsubishi Eclipse

1 Answer

1998 cavalier intake air temperature error


Traced wires with multimeter. Found gray wire broken at sensor connector. Repaired connector wire and now have correct voltage and temperature readings.

Jun 20, 2009 | 2005 Jeep Liberty

1 Answer

Mass air flow sensor


<SOHC, Federal - Non Turbo,Canada - Non Turbo>

1d0cd9b.jpg ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------=====================================================================================================================================

<California - DOHC Non Turbo, Turbo>


c4dfca0.jpg

Oct 17, 2008 | 1998 Mitsubishi 3000GT

1 Answer

IAT sensor


The intake air temperature sensor can be found in the air intake duct, or threaded into the intake manifold depending on which engine you have.

Jul 09, 2008 | 1990 Isuzu Trooper

1 Answer

IAT sensor on 1997 cadillac el dorado


  • P0110 - Intake Air Temperature (IAT) Sensor Circuit
  • P0111 - Intake Air Temperature (IAT) Sensor Performance
  • P0112 - Intake Air Temperature (IAT) Sensor Circuit Low Voltage
  • P0113 - Intake Air Temperature (IAT) Sensor Circuit High Voltage
  • P0114 - Intake Air Temperature Circuit Intermittent ,hope this helps you
  • Jun 14, 2008 | 1997 Cadillac Eldorado

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    155 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    74945 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7697 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...