Question about 1991 Toyota Cressida

2 Answers

1991 toyota crown 2.4 auto diesel wont go into 4th gear

Toyota crown 2.4 auto turbo diesel 1991 very smooth into 1th 2nd and 3rd but wont go into 4th everything else is working perfect

Posted by on

  • 3 more comments 
  • Joe soap
    Joe soap Mar 23, 2014

    also brought it to a garage tested it for faults but none found also he checked cables found them to be ok only 60.000 on the clock

  • Dan Jacobs
    Dan Jacobs Mar 23, 2014

    Is this a auto trans ? rear wheel drive?

  • Joe soap
    Joe soap Mar 23, 2014

    yes auto trans and rear wheel drive

  • Dan Jacobs
    Dan Jacobs Apr 04, 2014

    Look for the under hood DLC BOX inside jumper the TE to E1 the overdrive light will flash out codes for the transmission if it a electrical problem only these codes are 2 digit codes with a small pause between the first set of flashes (ten digits) and the last set (single digit ) So a flash,flash,flash, pause flash flash pause next set or repeat of code 32

  • Joe soap
    Joe soap Apr 05, 2014

    thank you so much i will give that a try dan

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 44,437 Answers

Check the 4th gear servo/ solenoid . I suspect that it is actually an over drive that is not engaging. there will be a fault code and it appears that the scanner is not being connect correctly to get the reading

Posted on Mar 24, 2014

Testimonial: "great info guys thanks to dan and bill that replied to me on this prob"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Toyota Master
  • 808 Answers

Joe there is a way to test the transmission control computer to see if any trouble codes are present> I will check my manuals and get back with on this by Friday 3/28

Posted on Mar 24, 2014

Testimonial: "thank you to all that replied to my prob"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 120 Answers

SOURCE: truck wont move in gear [manual trans] why?

push the clutch pedal all the way and see if the slave cylinder pushrod is going out at least an inch, if not replace the slave cylinder, if it does goes out, sad to say but you have problem somewhere else inside your clutch assembly

Posted on Mar 06, 2009

  • 255 Answers

SOURCE: My bottom gears won't work in my 1991 Toyota Celica ST 5 speed

sounds like synchronizer ring assbly

shack

Posted on Apr 13, 2009

  • 30 Answers

SOURCE: Have 98 Toyota Tacoma, the transmission is hard to

It sounds like your synchro's are going. You may try changing the gear oil (75w-90). Use a GL-4 type oil.

Posted on Aug 08, 2009

  • 1 Answer

SOURCE: I have a 1991 Toyota 4x4 Pickup manuel

It's the white bushing on the end of the gear shifter can be fixed easily from inside the truck. Just remove gear shift leaver an it's on the end.

Posted on Nov 14, 2009

  • 12 Answers

SOURCE: 1991 toyota camry automatic. Transmission is fine

sounds like you may not even have a 4th gear. worst thing is you may need a new transmission. try putting in some "Lucas Transmission Fix" it's like $12 at Autozone.. If that doesn't help, take it to a transmission shop and have them check inside your transmission to see if you need a new transmission or if it's something that could be fixed. It may even be a sensor.

Posted on Dec 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 626 manual 91, 2.2 non-turbo. the other day the gear box wouldn't let me put it in 3rd, then was unhappy with 1st and 2nd and gets stuck in 4th sometimes while driving, by turning the engine off...


The first check I would be doing is to bleed any air out of the clutch slave cylinder. I would be checking that the clutch system is operating and getting full disengagement of the clutch. From you description of the problem everything points to the clutch not working properly from either hydraulic problems or cable failure.

Feb 24, 2014 | 1991 Mazda 626

1 Answer

Cant get my toyota previa into 2nd gear from 3rd ad 1st also sticks


sound like sincro gon in box u can get them recond at mr gearbox or cheeper 2 get sechand gear box

Feb 11, 2013 | Cars & Trucks

1 Answer

Toyota rav4 2004 model with vvti engine some time when in motion it is like breaking what is the problem?


hi,i have rav4 2002 model, from 1st gear to 2nd gear its hard to move on but if motion goes on 3rd to 4th gear going smooth , maybe what the problem with my car

Dec 07, 2010 | 2004 Toyota RAV4

1 Answer

I have a 1991 accord lx. Was only functioning in


No, those sensors are seperate from transmission, should be a solenoid that is electrically controlled inside the transmission that controls the shifting.

Apr 05, 2010 | 1991 Honda Accord

1 Answer

GEARBOX PROBLEM


I hate to break it to you, but one of the most common problems with a 90-95 mr2 turbo or non turbo, is the transmission. It's sad to say but it sounds like your syncros. It is one of the biggest flaws with the car. I love mr2's. I have owned several, and everyone of them have had the same problem. It's most common in the shift between 1st and 2nd gear, but it will eventually start to go in every gear. up shift or downshift. It will start gradually, and eventually get to the point where you wont be able to put it into gear. Makes racing a nightmare. If you slam it into gear when it's not going, you run the risk of grinding your gears, bending your forks, and other various costly repairs with your transmission. I suggest that you don't punch it. Shift before 4500 rpms in all your gears until you can afford a complete rebuild. When you do that make sure you use the proper gear oil. If you use a cheap one, or have a non toyota mechanic do it, they may use a gear oil that will actually destroy your syncros faster. Trust me the car is a wonderful car. You won't have more fun in another car until you drive a Corvette z06.... I say that just cuz it is the only other car in the world I will drive beside my mr2.......Best of luck mate.

Mar 28, 2010 | Toyota MR2 Cars & Trucks

1 Answer

What is the function of 1st,2nd,3rd,4th,5th gear?


the function of the gears are to transfer and convert energy created by the engine into momentum

Feb 12, 2010 | 2003 Toyota Corolla

1 Answer

2003 Peugeot 406 diesel automatic stays in low gears


in automatic transmission box has two solenoids that were broken , so they must be changed , because I am peugeot specialist in Australia.

May 04, 2009 | 2005 Peugeot 405

Not finding what you are looking for?
1991 Toyota Cressida Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...