Question about 1993 Oldsmobile Eighty Eight

Open Question

How to change fuel filter on 1994 olds royale with fuel injection

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MNfisherman
  • 11896 Answers

SOURCE: i want to change my inline fuel filter for my 1994 Saturn

Remove gas cap and relieve fuel system pressure from fuel rail pressure relieve valve.Then you will want a drain pan of course. Before you can remove the fuel line, you will have to buy the cheap plastic quick-connect fuel line removal tool that fits your car. Or buy a universal pack for like $5. Then you press the plastic tool inside the fitting and pull on the other side and it disconnects instantly. then grab the new filter and the lines will just click right back in.



If you would like a free online repair manual for your car you can copy and paste this link in your browser to be brought to your car's manual.

http://www.autozone.com/shopping/repairGuide.htm

Posted on Feb 04, 2009

Ad
  • 3 Answers

SOURCE: Changing a fuel filter and fuel pump on 1994 Beretta

the pump is inside the tank and the filter is in front of the tank. you will have to remove the tank to change the pump. get as much gas out of the tank as possible then remove all the hoses to the tank then drop it. have fun

Posted on Mar 07, 2009

  • 14036 Answers

SOURCE: change the inline fuel filter

relief fuel pressure.remove air intake duct .the dohc engine remove the fresh air hose inlet hose from cam shaft cover.disconnect large under hood fuel line.near intake manifold support bracket on the left side of vehicle. look under vechicle where gas tank is there is a fuel filter with disconnects.

Posted on Apr 10, 2009

ZJLimited
  • 17970 Answers

SOURCE: change fuel filter on 1994 celica

1994 Toyota Celica 1.8L EFI DOHC 4cyl
The Fuel Filter is located under hood, center, upper firewall, mounted in fuel line.

Common fuel line routing
8e18bc1.gif


View of the common electric fuel pump located under the rear seat
3a8ebd2.gif


Removal Fuel Pump

  1. Disconnect the negative battery cable.
  1. Remove the rear seat cushion.
  2. Unscrew the service hole cover.
  1. Disconnect the electrical fuel pump wiring at the pump assembly. Check for any fuel leakage while in there.
  1. Remove the gas cap, this will prevent any fuel gas spilling out of any high pressure lines.
  2. Using SST 09631-22020 or an equivalent line (flare nut) wrench, disconnect the outlet pipe from the pump bracket.
  1. Remove the pump bracket attaching screws.
  2. Disconnect the return hoses from the pump bracket, then pull out the pump/bracket assembly.
  1. Remove the nut and spring washer, then disconnect the wires from the pump bracket.
  1. Remove the sending unit attaching screws, then pull the unit from the bracket. To disassemble:
    1. Remove the lead wire.
    2. Pull the lower side of the fuel pump from the bracket.
    3. Remove the rubber cushion from the pump.
    4. Disconnect the hose from the pump and extract the pump.
    5. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip.
    6. To remove the sender, disconnect the wiring from the bracket and unscrew the sender. Remove the screws, connector support, connector and gasket.
  2. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  3. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration.
To install:
  1. To assemble the pump:
    1. Secure and install a new gasket, connector and support with the screws.
    2. Attach the sensor and secure the screws, connect the wiring to the pump bracket.
    3. Install the pump filter using a new clip.
    4. Connect the outlet hose to the pump.
    5. Install the rubber cushion to the fuel pump. Push the lower side of the pump into place to secure on the bracket.
    6. Engage the connector to the fuel pump.

  2. Install the fuel sending unit to the pump bracket.
  3. Install the fuel pump and bracket assembly onto the tank. Use new gaskets. Tighten the pump bracket retaining screws to 31 inch lbs. (3 Nm).
  1. Connect the return hoses to the pump bracket.
  2. Install the service hole cover, then the engage the fuel pump and sending unit connector.
  3. Connect the negative battery cable
  4. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
  5. Install the rear seat cushion.
I hope helps whit this (remember rated this help) Good luck.

Posted on Dec 17, 2009

  • 1 Answer

SOURCE: engine missing on 1994 ford aerostar 3.0 v6

check engin light staying on

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a inline fuel filter on a 1989 olds royale


The Fuel Filter has a 19mm and a 14mm. Hold the Filter with teh LARGER WRENCH and turn the smaller one to remove the Filter

Apr 15, 2013 | 1989 Oldsmobile Eighty Eight Royale

1 Answer

1994 cougar fuel pump relay


From your saying looks like you have a feeding problem. Do you hear the fuel pump working? if it is working check by using the fuel pressure tester how much is the flowing pressure and if it is in the recommended pressure flow. Also check even after the fuel filter if the fuel is flowing into the rail and the pressure regulator is working. Last check if your injection system is working ,if the ecu sends a message to the injectors to work.

Sep 04, 2012 | 1994 Mercury Cougar

1 Answer

Fuel pump relay location 1994 olds 88 royale and fuel filter location


pump: is in the tank.

filter: check underneath the car's driver side just in front of the rear wheel.

fuel relay:
Under dash on the right side above the kick panel.


Dec 31, 2010 | 1994 Oldsmobile 88

1 Answer

We changed the oil and oil filter, changed the air filter, changed the fuel filter, changed the spark plugs, and put injection cleaner in our 1994 Ford Explorer Limited and we are getting horrible fuel...


Clean the throttle plate-CRC Throttle Body Cleaner
Clean the MAF Sensor--CRC MAF Cleaner

Have the O2 Sensors tested

If it is 10 years old, the exhaust
converter may be plugged,that's
not good and shouldn't happen

Check for vacuum leaks
A leak causes the O2 Sensors to add fuel,
to account for extra air

Make sure the air filter box and ALL
Ducting to throttle is air tight

Dec 18, 2010 | Ford Explorer Cars & Trucks

1 Answer

What do i need to know before changing the fuel filter


Fuel Injected Engines

The fuel filters on injected engines are a metal cylinder which is located in the rear frame rail or in the engine compartment. You may find it under the injection manifold on some models. Each model varies.

  1. Unbolt the retaining screws and remove the protective shield from the fuel filter.
  2. Place a pan under the delivery pipe to catch the dripping fuel and SLOWLY loosen the union bolt to bleed off the fuel pressure. The fuel system is under pressure. Release pressure slowly and contain spillage.

Sep 15, 2010 | 1994 Toyota 4Runner

1 Answer

Trouble shoot low fuel economy


try any of the following::::new spark plugs, fuel injecter clean(if it has any), using cruise control on long flat roads,new fuel filter, new after market air filter, pcv valve helps a little.. very easy to change to.......thats all i can think of..

Jul 20, 2010 | 1994 Ford Escort

1 Answer

1994 Sonoma: 1994 GMC Sanoma with 4.3 fuel injection. Idle spee...


that is un adjustable you would have to change the idle postion sensor

May 05, 2010 | 1994 GMC Sonoma

1 Answer

Car wants to stall changed injecter,egr valve iac


hi
check the all vacuum pipes is their any leaks.

Feb 21, 2010 | 1994 Saturn Sl

1 Answer

96 gmc safari replaced fuel pump and fuses, no start


Well, Let's see if a new MAF sensor makes it a running P.O.S.. And I hope you have changed the fuel filter since 1994. - Good Luck

Jun 14, 2009 | 1994 Chevrolet Astro

2 Answers

1994 Safari


have the computer checked or inspect fuel injecters if all else fails fuel pump weak.

Oct 03, 2008 | 1994 GMC Safari

Not finding what you are looking for?
1993 Oldsmobile Eighty Eight Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...