Question about 1992 Toyota Camry V6

1 Answer

HEAD LIGHTS HOW TO GET HEAD LIGHTS WORKING AGAIN?

Posted by Anonymous on

  • Peter
    Peter Mar 24, 2014

    From your comment I take it you have neither high nor low beam in both lights. If this is so check the fuses inside the interior of the car and under the hood. There may also be headlight relays that you can easily check by finding the same part number relay for another system of your car and swapping them if it works the you know you need to replace the relay if it doesn't then you need to do a little more work. Take a headlight out and get two jumper wires and hook the headlight directly to the battery if it works test the other light also. If both lights work then you know you have a wiring problem and the first place I would look is the light switch. If it is easy to get to I would chek it before I pulled the headlights out. A lot les trouble and if it works you know you are headed in the right direction anyway.. If after all the testing you still haven't found an obvious problem then you will have to troubleshoot the wires from the switch relays, etc to the headlight to find out where you are losing power. it could be something as simple as the ground wire for the lights being pulled loose because the battery wasn't bolted down and slid when you hotrodded it around the corrner trying to impress las chicas. Headlights are usually simple setups so if you don't find an easy fix from these tips then down load the manual for free and look at the wiring schematic. people freak out when you mention working with electricity but just thing of it as water flowing in a water hose. If there is a break in the hose because it rubbed against something sharp or hot then you loose the water there(electricity) if you have a kink in the hose the water can't get through. Same thing with electricity if you have a lot of corrosion or a bad connection the electricity can't get through. Try it you can do this keep me posted as to what you try and I will keep checking back to help you along.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Toyota Master
  • 354 Answers

I will need more information especially the circumstances when the problem first occured.

Posted on Mar 23, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mechanic fixed bike , vacuum hose in wrong position, also choke wired up incorrectly ! Started fine , but now stopped again !


Might be smart to ask mechanic what he or she did. There is a fuse on most of these that might have blown and mechanic fixed it but now blown again, due to bad connection somewhere drawing too much current. BTW, this section is for cars and trucks only.

Oct 17, 2016 | Cars & Trucks

1 Answer

2007 equinox head lights burn out all the lights go dim hit the casing and they go bright again changed the pig tales and it still does the same thing why ??


I have changed the head lights in are Equinox several times. They work great for some time I would say after 4 mouths 1 will burn out . The low beam. I will change both lights. again not touching the leans putting them in with a clean rag.work great then in about 3 mouths the other side low beam will burn out. Again taking both out. I bought the best you can buy lights put them in September. 1 day the 1 burned out the next day the other side burned out low beam. So on March 3,I put in 2 new one's. again crossing my fingers. I'm almost redy to go to the dealer on this one. any idea's. Need help with my 2007 Equinox in Pa. Thanks Roger

Feb 27, 2013 | 2007 Chevrolet Equinox

1 Answer

1993 ford thunderbird head lights went out


I hate to tell you this, based on the amount of work and the expense, but I feel the problem is with the headlight switch/dimmer switch. For all the lights to burn out at the same time would be depressing, at best. Good luck, and I hope you can find a good used one, and a good friend to help you repair this.

Nov 15, 2012 | 1993 Ford Thunderbird

1 Answer

After driving with my Head Lights on, I turn them off. Later on when I want to drive again with my Head Lights on all that come on is the Parking Lights. Also the Passing Head Lights work. Is this the...


Are you saying the passenger light works? If they both do not work, it might be your fuse. If only one works and the bulb and fuse are good, you may have a bad wire. It could point back to the switch, but usually if that is bad, the lights won't turn on.

Mar 07, 2011 | 2005 Ford Crown Victoria

1 Answer

My head lights don t work. they were working fine, I simply pulled in the driveway, on the level twisted to shut them off, and attempted to put the lights on again, and now head lights. High beams work...


There are several things involved here. The combination switch (headlight,dimmer, turn signal switch), The headlamp relay and the dimmer relay. It could be a bad switch or a stuck relay.

Mar 03, 2011 | 1993 Honda Accord

1 Answer

Head light and tail light wont work


the headlight switch may have a short in it. replace switch and try again.

Feb 27, 2009 | 2003 Ford Windstar

1 Answer

No lights


some where you lost the ground for the lights take your time and check things over again and you will find it

Dec 13, 2008 | 1998 Ford F150 Regular Cab

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...