Question about 2004 Hyundai Santa Fe

1 Answer

2004 hyundia santa fe had a clicking noise by the power steering pump then later at a red light stopped running and wont start. all gauges showed no indication of anything wrong

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 hyundia santa fe. starts fine idles fine speeds up fine,but when driving at a continous speed it loses power then speeds back up. what could be the problem


either fuel pressure from the regulator is messing up or your pump is about to die.. hard to say with out putting a gauge on the rail.

Apr 28, 2015 | 2003 Hyundai Santa Fe

1 Answer

2008 santa fe front noise


Is it a "wine" noise that gets louder when you rev it up? Sounds like an idler pulley. Is it a 3.3L motor?

May 29, 2012 | 2004 Hyundai Santa Fe

1 Answer

Power steering pump in noisy when first started when cold, 2004 santa fe 3.5, has 62000 miles


Try flushing the fluid,which you should be
doing every 3 years
Add a bottle of Lubgard for power steering or
what ever the dealer has
Use the correct MFG Fluid

Eventually you will replace the pump,
when you can no longer stand the noise.

Then steering rack most likely is about to fail
from not changing the fluid and is causing stiffness
and high pressure thus the noise

Jan 30, 2011 | 2004 Hyundai Santa Fe

1 Answer

Where can i source a power steering pump#57100-26200 and pully #57130-3A000 for hyundia santa fe 2002


try a local junk yard thats all ways a good start or a local auto parts supplyer

Nov 10, 2009 | 2002 Hyundai Santa Fe

1 Answer

I have a 2004 hyundia santa fe it has a very


It sounds like you have a faulty tps (throttel position sensor). If the car has a check engine light on, any auto parts store can check them for free. You should also take a good look at the vacuum lines, intake tube, and the air filter. Any vacuum leaks can cause erratic behavior. You may also want to buy a can of mass air cleaner to spray down the mass air sensor and tps as well as any other sensors on the intake. I hope this information is helpful.

Aug 30, 2009 | 2004 Hyundai Santa Fe

4 Answers

I have a high pitched noise which appears to be coming from front right engine compartment (as you are looking at the engine) which sounds kind of like a belt that is squealing. It is intermittent. Just...


Could be several things. WHICH ENGINE?.. 4 cylinder (has three belts, power steering/water pump, alternator & A/C compressor, one tensioner pully A/C compressor), The V6 2.7 (has only one belt, 1 Idler pully and 1 tensioner pully), the V6 3.5 has two belts - A/C/alternator, and power steering - there are two tensioner pullys). Noises can be caused by the belt(s) themselves, pullys, bearings, pully bearings, water pump shaft bearings (or belts/pullys rubbing up against something). Let's not forget that there is also belt(s) behind the Timing Belt cover as well as pullys and bearings associated with the timing system. You could start by removing one accy drive belt at a time (alternator, water pump, compressor, power steering, etc) to see whether or not the noise goes away in each case. If after each case, you discover the noise is still there, it's probably behind the timing belt cover (idler/tensioner pully, water pump shaft bearing, crankshaft bearing, etc.). Good Luck

Jun 29, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...