Question about 1991 Chevrolet Caprice

1 Answer

Vedios on how to instail 350altornater bracket in a 1991 cheavy capries

I want lean how to put a alternator bracket on my 1991 cheavy

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 265 Answers

Did you take the old one off yet. first thing you can do is buy the shop manul. or has a good how to section. changing the alt is not that hard. first you need to disconnect the battery to stop from shorting out the power. then its just a matter of removing a few bolts and the belts. once the belts are out of the way you can remove the alt and then get to the bracket. some cars are a lot harder then others. some have the power steering in the way which is a huge head ache. also look on youtube. a lot of people post there videos now and can be same help

Posted on Jan 23, 2015


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you replace an alternator on 1991 Mercury Capri XR 2 turbo

Remove alternator, replace alternator. Get your self a service manual if you can't figure it out. They sell them at the same place the alternator is sold.

Nov 18, 2014 | 1991 Mercury Capri

1 Answer

Can I get a diagram for a removal of a alternator on a 1991 Mercury Capri XR 2 turbo

Disconnect the Red battery terminal first and then loosen the serpentine belt by moving the tensioner pulley with the correct socket to permit slack enough to dislodge the serpentine belt from any pulley such as the idler pulley or other pulley. Pay close attention of how the belt is routed prior to removing. Remove electrical connections to the alternator. Remove all alternator mounting bolts to remove the alternator. I would recommend a Haynes manual from the parts store on your vehicle. I will help you now and well into the future with all problems that may occur. Be sure you have a fully charged battery at all times as a low battery will cause the internal voltage regulator to over heat and burn up due to the need for more amperage than the alternator can generate.

Nov 18, 2014 | 1991 Mercury Capri

1 Answer

Remove an alternator from 1991 Mercury Capri XR 2 turbo

Alldata online or local library may have the manual go to Ford dealer service ask if you can look at their service manuals

Nov 18, 2014 | 1991 Mercury Capri

2 Answers

Removing an alternator from a 1991 Mercury free xr2 turbo

Disconnect the battery so you don't melt your fingers. Remove the belt by relieving the pressure at the belt tensioner. Remove the alternator wiring harness and the two or 3 long bolts that hold the alternator on. Swap for the new alternator and put it all back together.

Nov 18, 2014 | 1991 Mercury Capri

1 Answer

Belt diagram alternator serpentine

The 91 Capri does not use an alternator serpentine, just a standard v-belt. It goes around the alternator pulley, water pump pulley and the crank pulley...

Oct 10, 2013 | 1991 Mercury Capri

1 Answer

Where is the voltage regulator located in a 1991 mercury capri?

In the alternator,for charging the battery

Unless your talking about some other
vehicle problem

Aug 05, 2011 | 1991 Mercury Capri

1 Answer

I need to replace the alternator belt on my 1991 Mercury Capri

This is easiest to get to if you drive the car up on ramps and work from both underneath and above.
Remove the undercage protective shields to expose it.
Belt will cost about $10.

Jun 19, 2011 | 1991 Mercury Capri

2 Answers

How to remove alternator on a 1991 toyota mr2

Just did this on my two 1991 MR2's. The easiest way I found (without taking off the entire exhaust) is to take off the belt, remove the alternator so that it is out of the bracket (but still stuck in the car, as you have noticed) and then undo the 4 bolts holding the bracket onto the engine block. You will probably need to use a lot of force on them if they have never been removed (rusty, etc). With the bracket out of the way the alternator can be removed through the top of the engine. With the bracket there, it is impossible to remove it because the bracket and the intake manifold are in the way. I BELIEVE if you remove the entire exhaust, you can get the alternator out from the bottom as well. Remember when you put the new one in, to make sure that it goes to sit on the framework before you tighten down the bracket again (if you do the bracket first, you can't get the alternator back in the car!)

Jul 09, 2009 | 1991 Toyota MR2

Not finding what you are looking for?
1991 Chevrolet Caprice Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides