Question about 2000 Dodge Durango

1 Answer

Reset engine oil change monitor

How do I reset engine oil change monitor - where is the reset switch/button located? Check engine dash light is on and I have 7000+ miles on the oil/filter. I am guessing this is the problem?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

At 7000 you should definetly change oil, but depending on the make and model of your vehicle, to shut off of the check engine light will vary from a simple procedure in your owners manual, to having a obd 2 code detecter hooked up to identifie and delete codes

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset change oil soon light


Oil Life Monitor Resetting (KD, KE)
Description
The engine oil life monitor will indicate when to change the engine oil and the engine oil filter - usually between 5 000 km (3,000 miles) and 12 500 km (7,500 miles) since the last oil change. Under severe conditions, the CHANGE OIL message may be displayed before 5 000 km (3,000 miles). The vehicle must not be driven more than 12 500 km (7,500 miles) or 12 months without an oil change.
The engine oil life monitor will not detect dust in the oil. If the vehicle is driven in a dusty area, be sure to change the oil every 5 000 km (3,000 miles) or sooner if the CHANGE ENGINE OIL message is displayed.
Reset the oil life monitor when the oil has been changed.
Resetting Procedure
Press the INFORMATION SKIP button on the DIC control panel in order to display the OIL LIFE LEFT message.
Press and hold the RESET NO button until the display shows 100% ENGINE OIL LIFE.

Jan 29, 2016 | 1999 Cadillac DeVille

Tip

Toyota service light 1968-97


Previa

1991-97

To reset the "OIL CHANGE" light, remove the cover from the switch located below the speedometer. Insert a blunt object and depress the switch.


Cressida,
Supra

w/ Super Monitor

1986-88

When "CHECK ENGINE OIL" is displayed on the Super Monitor, press the "SELECT" button below the display until "ENGINE OIL" mode is displayed (unless it already is displayed). Then press and hold the "SET" button until "OK" is displayed.



on Dec 07, 2009 | Toyota Cressida Cars & Trucks

Tip

Ford service light procedure 1994-01


Windstar

1999-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the message center, press the SETUP control to access the System Check mode. Press and release the RESET button until IF NEW OIL HOLD RESET is displayed. Press and hold RESET button until OIL LIFE SET TO 100% is displayed.


Windstar


1997-98

To reset "CHANGE OIL SOON/OIL CHANGE REQUIRED" message on the Message Center, press "RESET" and "SETUP" controls at the same time. "OIL LIFE % HOLD RESET NEW" will be displayed. Press the "SETUP" control to access the System Check mode. Press "RESET" to start the system check. Press and hold the "RESET" control. Press "RESET" and "SETUP" to reset the system to 100%


Explorer,
Mercury
Mountaineer


1997-01

To reset the oil life feature on the Message Center, press and hold the "OIL CHANGE RESET" button until the system counts down (about 5 seconds). The Message Center will display "OIL LIFE RESET TO 100%"


Probe

with Analog Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE INTERVAL CHECK" is displayed is displayed on the far left side of the instrument panel, press the "SERV OFF" button, located on the speed alarm keyboard, until three tones sound.


Thunderbird,
Mercury Cougar

with System Scanner

1986-88

When "SERVICE" appears on the Diagnostic System Scanner, press the "ODO SEL" and "TRIP RESET" buttons simultaneously. The "SERVICE" message will go out and three short beeps will be heard when the system is reset.


Thunderbird,
Mercury Cougar


1989-94

If "CHANGE OIL SOON" or "NOW" is indicated on the Monitor, turn the ignition on, but do not start the engine. Within 16 seconds, insert a paper clip into the cavity to the left of the display and depress. The display will flash; when it stops, the system is reset.















on Dec 07, 2009 | Ford Windstar Cars & Trucks

1 Answer

Need to reset the Change Oil Light on a 2007 Mercury Grand Marquis


SWITCH IGNITION ON.ENGINE OFF. PRESS AND RELEASE SETUP BUTTON.PRESS SELECT TO BEGIN SYSTEM CHECK IS DISPLAYED. PRESS AND RELEASE SELECT BUTTON WHEN OIL LIFE PRESS RESET IF NEW OIL IS DISPLAYED PRESS AND HOLD RESET BUTTON FOR 2 SECONDS. OIL LIFE XXX% HOLD RESET IF NEW OIL IS DISPLAYED. PRESS AND HOLD RESET BUTTON FOR 3 SECONDS UNTIL OIL LIFE START VALUE SET TO 100 % IS DISPLAYED. SWITCH OFF IGNITION.------- NOTE THE SETUP BUTTON AND SELECT BUTTON ON STEERING WHEEL CONTROL PAD THE RESET BUTTON IS ON DASH THERE IS FOUR LITTLE BUTTONS ON DASH SECOND BUTTON IS THE RESET BUTTON.

Jun 05, 2011 | Mercury Grand Marquis Cars & Trucks

2 Answers

The Change Oil (not oil light) in my 2002 Camaro came on less than 10 miles after it left the shop for new brakes, and less than 300 miles since its last oil change. What would cause the change oil light...


If you changed your oil just less than three miles ago, you just need to reset the computer. In this vehicle it may be the same as other chevys. what you will need to do is turn the key to the run position. Depress on the gas pedal three times and turn off the key. this should reset the computer. good Luck

Mar 23, 2010 | 2002 Chevrolet Camaro

Tip

Buick service light 1991-01


LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











on Dec 07, 2009 | Buick LeSabre Cars & Trucks

3 Answers

2007 FORD EXPLORER SPORT TRAC 4X4 Change oil light on


Press and hold the SELECT/RESET
control switch to select SYSTEM
CHECK when “SYSTEM CHECK /
HOLD RESET” is displayed in the
message center. Selecting this
function from the SETUP MENU
causes the message center to cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
Pressing the SELECT/RESET control switch cycles the message center
through each of the systems being monitored.

The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
4. DOOR AJAR
5. EXTERIOR LAMP
6. BRAKE SYSTEM
7. PARK BRAKE
8. MILES TO EMPTY
9. FUEL LEVEL LOW (will only display if 50 miles or less to empty)
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:
1. Enter SYSTEM CHECK to display
“OIL XXX% RESET IF NEW”.
2. Press SELECT/RESET control
switch to display “HOLD RESET IF
NEW OIL”.
3. Press and hold the
SELECT/RESET control switch for
more than 2 seconds. Oil life is set
to 100% and “OIL CHANGE SET TO
100%” is displayed.

Apr 02, 2009 | 2007 Ford Explorer Sport Trac

2 Answers

2005 reset switch oil change .


to manually reset it , turn the key to the on position with the engine off , depress the accelerator pedal 3 times slowly to the floor within 5 seconds , if change engine oil flashes for 5 seconds oil life monitor is reset ...

if the vehicle is equipped with a driver information center , reset the oil monitor by pressing driver information center SELECT button for 5 seconds while Engine Oil Life is displayed .

Jan 07, 2009 | 2005 Pontiac Grand Am

1 Answer

What is the "oil reset switch" for?


your car should have an option in the dash that tells you when an oil change is due as well as a possilbe check engine light when it comes on. when the oil has been changed the oil reset switch , when depressed should turn the dash light off.

Dec 02, 2008 | 1999 Buick LeSabre

2 Answers

Oil was changed and check engine light was not reset


This is really easy! Please follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON; do NOT start the engine

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and the light will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps, and thanks for choosing FixYa. Happy Thnkasgiving!

Nov 24, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2000 Dodge Durango Logo

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...