Question about 2007 Mitsubishi Endeavor

1 Answer

I have a mitsubishi endeavor and showing P0600 code. Dealership had the CAT 1 cleaned 6 months ago. Recently replaced the O2sensor hoping that might fix the problem. Didn't

When driving fast on a highway, jerks like crazy after it warms up. When driving locally, misses, stalls out at stop signs, redlghts; periods of no power for a couple secondes and then the power comes back and lurches forward. Getting worse with time.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 44,536 Answers

Code p-0600 refers to CAN data bus --malfunction===causes ---wiring---connected to system---ECM.
If you have connected something ( radio-cd--any thing else ) it may pay to disconnect it and see if there is an improvement. Other than that contact Mitsubishi customer technical division and find out exactly is meant by the CAN data bus and go from there IT may require a new ECM unit

Posted on Mar 23, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 462 Answers

SOURCE: Car stalls when driving

Take notes , when this happens.
For instance : engine warm or cold , outside conditions (cold , hot) , car driven for a while , long or short distance when problem occures etc.... , that may help for diagnosis.
It very well may be temperature relaited , sience it has to sit (cool off) for 5 min.
Ignition coils sometime do that.
I'm mechanic shop owner and intermittent problems are the hardest one , so any piece of iformation on above mentioned events may give a clue.
Good luck.
Greg.

Posted on Jul 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oxygen sensor heater circuit bank 2 sensor 1 located 05 endeavor


in the exhaust manifold of the front bank or before the cat converter
bank 2 is closest to the grill and bank one is next to the fire wall
the heated oxygen sensor is before the cat converter and the normal oxygen sensor is after the cat converter

Jun 19, 2016 | 2005 Mitsubishi Endeavor

1 Answer

Is there a way to reset keyless entry for 04 endeavor?


Search Results

    2004 Mitsubishi Endeavor Key Fob Remote Programming ...

    blog.keylessentryremotefob.com/.../04/2004-mitsubishi-endeavor-key-fo...
    Apr 25, 2013 - 2004 Mitsubishi Endeavor Key Fob Remote Programming Instructions ... you might have visit us at Keylessentryremotefob.com You can also ...

    Mitsubishi - Free Keyless Remote Fob Entry programming .

    How To Replace Mitsubishi Endeavor Key Fob Battery 2004 ...

    ? 2:04
    www.youtube.com/watch?v=yeQRdre7O0Q
    Oct 31, 2014 - Uploaded by Keyless Entry Remote Inc
    ... will show you How To Replace Mitsubishi Endeavor Key Fob Battery 2004 2005 To Order This Remote ...

Nov 01, 2015 | Cars & Trucks

1 Answer

How many oxygen sensors does a 2000 buick lesabre limited 3.8l have and thier locations


engines have a HO2S (heated) and O2S sensors for each cat converter. HO2S sensors are on the manifold side of the cat and the O2sensor is on the outlet side of the cat. So if your car is a v engine then there will be 2 of each. If it is a 4 cyl or inline 6 it will have 1 of each

Aug 20, 2014 | Cars & Trucks

1 Answer

Stumble @ 30-40 MPH under ligh acceleration


Problem sometimes is with cheap parts they are bad.Good wires,good plugs,good coils.

May 05, 2013 | 2004 Mitsubishi Endeavor

1 Answer

P0507?


Solenoid is your problem, the solenoid is connected to the (EGR) exhaust gas resirculation, when the solenoid fail, the EGR don't work right, and your O2 sensor on the cat is reading to much exhaust gases in the cat, so your catalytic converter is failing, solution go to a junkyard and get one from other engine or similar the looks clean and replaced, run your car for more than 10 miles and your service soon engine light should go off, if that don't append your O2sensor on the cat is no good.

Jul 06, 2012 | 2001 Mitsubishi Galant

2 Answers

Codes for engine 2003 mits lancer the code is P0421 warm up catalyst efficieny low bank one. what does this mean. and how do i fix it .thanks chad


YOU COULD HAVE AIR LEAKS AT THE EXHAUST MANIFOLD OR IN THE EXHAUST PIPES.OR YOUR CATALYTIC CONVERTER IS DAMAGED CONTAMINATED OR HAS FAILED.

Aug 02, 2010 | 2003 Mitsubishi Lancer

2 Answers

Infinity 6 disc cd player


We have the same problem with ours the codes are in the owners manual however they tell you to take it to the dealership and that was $50 for them to look at it and $1500 for a whole new stereo. Hope this helps.

Aug 25, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2007 Mitsubishi Endeavor Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...