Question about 2002 Isuzu Axiom

Open Question

Advancing car hesitates

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 Ford Expedition 4.6L hesitance

Could be a number of things. Tune up, fuel injectors, coils, fuel filtration, vacuum system, compression. Inexpensive thing to do is take it to Advanced Auto, PepBoys or any parts store and ask them to check the codes. Most places won't charge you. Otherwise you need to take it to Ford Dealership to run diagnosis.

Feb 17, 2014 | Ford Expedition Cars & Trucks

1 Answer

Hesitation where car felt like it bucked, check engine light went on

Go to an Autozone or Advanced Auto and have them read the code for free. The problem can be anywhere until you know the codes.

Feb 13, 2014 | Cars & Trucks

1 Answer

Hesitation on the 2003 ford focus

Hello! #1...I need to know if the Check engine Light is on...If it is, take the vehicle to an Auto Zone or Advanced Auto (any auto parts store) and they, for free will read the code/codes...send the trouble codes to me and I'll fix your Focus...#2 tell me which engine is in the car; give me the sub model ie...SE, ZTS....etc...If there isn't a CEL tell me....Guru...Saailer

Dec 14, 2011 | 2003 Ford Focus

1 Answer

When i acelerate the car its satling and rpm are going down a little than after second or two its pushing again i dont know whats happening i change all filters and and oil what could be problem civic...

That means a hesitation in acceleration. There are lots of possibilities these happens when the car hesitate to move quickly.
Have a full tune up of your engine, just to clear up the possibility, air cleaner, fuel filter, sparkplugs, ignition timing, high tension wire( spark plug cable ), and cleaning up the airflometer.
Have your favorite mechanic do check on those first.
That hesitation have two major part that always breaks down, the fuel filter is already blocked and the ignition timing ( distributor igniting points corrosion and vacuum advance failure due to vacuum leaks ).
Hope that helps you.
Thanks for using FixYa!

Jul 12, 2011 | Honda Civic Cars & Trucks

1 Answer

Occasional miss or hesitation while driving will also do this at idle have checked points and set at 20 thou have changed plugs set timing at 7btdthen advanced a little after no change leads are only...

You set the gap at 20 sould be 16,a hesitation or occasional miss is not from the points or condensor, its from the craburator,its a power valve or your float getting the hesitation can be the secondary not feeding at wide open throttle, the carburator is faulty, and plus todays fuel is not meant for carburators

May 04, 2011 | Toyota Land Cruiser Cars & Trucks

2 Answers


probably a throttle position sensor or a fuel pressure problem,try replacing the throttle position sensor, filter and/or the pump

May 31, 2009 | 1988 Ford F 150

1 Answer

94 buick stalls and hesitates

check fuel pump should be 41 to 47 psi.

Apr 26, 2009 | 1994 Buick Century

3 Answers

Hesitation in my Engine ~ Damsil in Distress!

sounds like a choke sticking or carburetor needing attention..(adjusting or rebuilding) hard to say more without hearing it my own self.....hit me up if i can help more

Oct 21, 2008 | 1965 Ford Mustang

1 Answer


Are you getting any CHECK ENGINE light at all?

That's my 1st ? before troubleshooting any further as the hesitation could be caused by numerous things!

Thx and best regards in advance for responding and don't rate me until I solve your problem!


Aug 29, 2008 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
2002 Isuzu Axiom Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides