Question about 2003 Hummer H2

Open Question

H2 glove box latch broken

Center lid will not stay latched

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76630 Answers

SOURCE: change bulb in glove box for a 2007 hummer h2

The bulb just pulls out.

Posted on Jan 27, 2017

Testimonial: "I've tried over and over but I just can't get enough of the bulb to pull it out with my fingerd"

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to open a glove box door when the latch is broken on


check under the glove box door to see if you can see the hinges. Sometimes you can unscrew the hinges from the bottom. Else you have to knock out the hinge pin on both hinges, open the door from the bottom and see if you can swing the door up to undo the latch.
If this does not work, cut a hole in the bottom ot the glove box, it is usually made of plastic or papier mache, release the latch from inside, then you can remove the plastic box once it is open and replace it with a new one. It will cost you, but it will be less expensive that breaking down the metal door!

Feb 21, 2015 | 1999 GMC Sierra

1 Answer

How do you replace the latch on a glove box in a 2001 dodge caravan


What you need to do is lower the glove box, push in on the sides of
glove box, flexable area the holds the lid from falling open to the floor.
let it swing down, and unhinge the lid from dash area, then remove the screws that hold the lid together and seperate from latch area, then remove the latch and replace, reverse the procedure
to ressemble.
GOOD LUCK, RDJRP.

Apr 15, 2011 | 2001 Dodge Grand Caravan

1 Answer

How to replace glove box latch The glove box latch is broken off and I can't get it open. I can get a new latch but don't know how to install it----am afraid I will break something. Help!


Remove the glove box: unscrew 3 screws inside the box (in a row towards the top) and 2 on the outside (one on the bottom right side- open the car door to access it, and one on the bottom left side). Grab the bottom of the box and pull it toward you. It will come off.

Once it's off, flip it over. There are 2 screws that hold the latch housing on the box (you'll find them in the 2 circles that are cut into the plastic). Unscrew them.

Next, flip it back over to the front and stick a small flat screwdriver between the latch housing and the glove box part that it's stuck into. Gently pull the latch and the whole thing should come out.

Pop the new one in, replace the screws, put your glove box back in your car, and you're good to go!

Mar 27, 2010 | 1998 Volkswagen Golf

1 Answer

1992 mercury cougar broken glove box latch. How


you will have to pry it open and then replace the latch.good luck

Mar 01, 2010 | 1989 Mercury Grand Marquis

1 Answer

My glove box won't open when I try the latch...HELP!


your going to have to pry open, latch may have broken.

Jan 06, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Latch will not open glove compartment. I do not know how how to get get to the inside of box to trip the release.


Try pushing the lid hard and downward while operating the latch. If that doesn't work, you have the option of tearing the box out from behind, or prying the lid downwards until the latch releases. Kind of messy any way you go! If it was a problem with a keyed lock, you could get a locksmith to pick the lock for you.

Dec 26, 2009 | 1997 Volvo 850

1 Answer

2002 camry - Need to replace broken console lid


Solved it. Found a small shank screwdriver that fitted into the opening with a little bending of the plastic frame. managed to replace it with a new one without trouble. No further help needed. dave

Nov 06, 2009 | 2002 Toyota Camry

3 Answers

Glove box latch broke close. How to open?


Hi, how are you? From what you are describing the latch on the inside sounds like it has broken and is not releasing. You can try to lay on the floor and look up in the bottom of the back of the glove box there are two tabs one on each side. If you push these tabs inward the bottom of the box should come free and help the top to come free. If you cannot see the tabs or can’t get the tabs pushed in, you are going to have to force it open, you can do this with a flat pry bar, wrap the end with a cloth to protect the paint. The good news is that the glove box latch is pretty cheap to replace.

Jul 07, 2009 | 2000 Mazda MPV

1 Answer

Glove box latch broken


The latch is sold seperately. Call your local dealer with the last 9 of you vin number to get the right color. Most dealers sell at the same MSRP price as all the others in town. I know cause I sell these all the time at my Chrysler dealership.

Jan 08, 2009 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Hummer H2 Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...