Question about 2008 Chrysler 300

1 Answer

Rattling noise I hear rattling noise on my front end of my Chrysler 300 and it's driving me crazy!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 42,037 Answers

Check suspension joints and balls . Check for worn loose shockie mounts/rubbers check for upper strut mounts and rubbers . Check for stabiliser rubbers and links, check for loose steering rack. check for failed engine mounts . Check for loose deflector plate under front of vehicle.

Posted on Mar 23, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: LOUD CREAKING NOISE COMING FROM FRONT END

grease ball joints that should fix it

Posted on Mar 24, 2009

  • 76 Answers

SOURCE: clunking/rattling noise in the front end (2000 chrysler 300m)

you need to get the front end checked. it sounds like a suspension problem possibly your struts or sway bar but it could be a more serious problem. hope this helps

Posted on Apr 16, 2009

wracefans24
  • 1985 Answers

SOURCE: 2005 chrysler 300 c

front sway bar repair kits needed.

Posted on Jan 08, 2010

  • 3 Answers

SOURCE: i have a 2001 chrysler voyager that is making a noise

I have the same problem. Have a late 2000 Voyager. A company recently replaced the shocks and reassembled the struts. I now found out that they did not assemble them correctly. The noise is from the strut central nut working loose. It is a serious problem in my case. I would get one of your struts removed and checked ASAP.

Norman,
South Africa

Posted on Aug 08, 2010

geterrollin
  • 277 Answers

SOURCE: i have a chrysler 300,

The link pins could be the culprit if they have play in them, also the sway bar bushings can be worn. Another common noise can occur from play between the brake pads and caliper. The pads have a tab on each end that can wear over time

Posted on Jan 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is making a rattle noise in the front?


Check all the bushings and make sure they are not loose. General Motors bushings are prone to cracking.

Nov 02, 2012 | 2005 Chevrolet Malibu

1 Answer

Any suggestions on fixing front end noise in my 2005 Chrysler 300:


When you replaced the struts they should have changed strut mounts also, that is where noise comes from, check your reciept.
Also, I have seen mounts, tie rod ends and ball joints loosen over a period of time, so have all your bolts and nuts rechecked for looseness.

Mar 03, 2017 | 2005 Chrysler 300

1 Answer

My electric system is going totally crazy on my 97 sebring jx. It constantly dings that seatbelt noise, it also rattles and is very bad on pot holes and rough streets, i dont know if i should get a new...


The seat belt noise issue is possibly related to the sensor box under the front seat that they are all connected to. Also controls the airbag light and 'ding' warning for that. Cost is about $300-$400 to replace.

Feb 08, 2012 | 1997 Chrysler Sebring

2 Answers

Front end making rattling, thumping noise when driving. Slowing of speed increases the noise.


i would 1st check out the front tires to make sure that they are not defective, if tires check out ok, then i would put the jeep on a rack at a garage, and check out all of the front end components, including c. v. joints and the wheel bearings.

Jun 24, 2011 | 1994 Jeep Grand Cherokee

1 Answer

My 96 chrysler lhs has a knocking/rattleing sound coming from the bottom engine and as you push down on the gas the faster you drive the louder it rattles


if the noise is coming from the bottom end of the motor then you have either bad connecting rod bearings or bad crank bearings.if when you snap the throttle you hear a double knock then its connecting rod bearing if not then its crank bearing.a collapsed piston can sound low in the engine and its usually a dull knock noise.if you have the engine running and the noise is there and you pull off one plug wire at a time(and reconnect it after checking) and the noise goes away or mostly goes away with the wire unhooked then the cylinder that the noise changed is the cylinder that has a bad piston.

May 25, 2011 | Chrysler LHS Cars & Trucks

2 Answers

I have a 2002 Passat V6 Wagon and the brakes and rotors were replaced (aftermarket parts) about 3 months ago. The CV boots were replaced 2 weeks ago. When I apply the brakes, about 3/4 of the way down,...


Check and see if the Brake Pads were re-installed with all the hardware, ie, Anti-Rattle Clips, shims etc. if your pads are not secure in the Calipers it will cause the pads to rattle when you are driving in effect causing your brakes to make weird noises, ie, groaning, squealing, rattling.

Sep 08, 2010 | 2003 Volkswagen Passat

1 Answer

RATTLING NOISE ON THE PASSENGER SIDE FRONT TIRE


The first thing to check on a rattling noise is if going over minor bumps in the road if that is when it makes noise is a sway bar link, they make a rattling noise. If you raise that wheel up you might also want to try and wobble the wheel to be sure it is not a tie rod end or ball joint. Typically I run into the sway bar links or the sway bar bushings making the noise. However ive even seen it be a rock sitting on the strut plate.

Jul 24, 2010 | 2008 Chrysler 300

1 Answer

Front suspension noise-dull rattle-thumping sound,bumpy roads


look at the front lower engine mount. I had similar noise which has been driving me nuts, thought may be thesway bar links, put it on friends hoist and saw that the front engine mount (mounted to bottom of lower radiator support) was cracked and the rubber bushing inside very worn with pieces missing. odd thing is that reving, or putting into gear never caused it to make a noise, just certain bumps. I ordered part from Autozone,hopefully it gets here before the holiday week end is over.
Good luck

May 15, 2010 | 2005 Dodge Caravan

1 Answer

Sounds like a broken shock rattle orstrut loose when you go over bumpy roads dealer says front end is tight but noise is still there driving me crazy


Check engine mounting rubbers or bushes. If worn or loose they can cause noises like this. Shouldn't happen in an 08 though. Check things like the battery strap is tied down and the fuse box cover is secured.

Nov 05, 2009 | 2008 Jeep Grand Cherokee

2 Answers

Clunking/rattling noise in the front end (2000 chrysler 300m)


you need to get the front end checked. it sounds like a suspension problem possibly your struts or sway bar but it could be a more serious problem. hope this helps

Apr 16, 2009 | 2000 Chrysler 300M

Not finding what you are looking for?
Cars & Trucks Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...