Question about 2007 Pontiac G6

1 Answer

Pontiac g6 seat recline lever won't work anymore

My recline lever on drivers side will not work anymore. seat is stuck in upright position. if you try to move the lever up or down it doesn't do anything.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

Remove seat(s) and check for obstruction in the mechanism path. You'll need a big Torx bit.

Posted on Aug 16, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: Key won't come out of the ignition.

yes, there is a shiftlock sensor, so you can only take the key out when in park.
Getting at it requires removal of the center console.
When you have it in park - give it a little tap forward before turning off the vehicle.

Posted on Jan 11, 2009

  • 124 Answers

SOURCE: 1997 pontiac sunfire manual transmission won't shift out of gear.

What you can try is to remove the shift cables from the transmission side. then move the shifter and see if everything is free if it's still sticks then the cables are going to be replaced. if everything is moving with the cable off. then you need to remove the shift tower on the tranny (where the shift cable is I belive it's 5 bolts) remove the tower and you will see the shift pin. Inside the tower there is a cotter pin that breaks and that will cause you to have one gear and unable to selected another gear. If you are not mech inclined I would no attemped the shift tower repaire, the cables do it will save you money. The shift tower has bushings that can fall into the tranny.

Posted on Jul 15, 2009

  • 1 Answer

SOURCE: 2006 Pontiac G6 GTP window auto close/open

OMG. I replaced the battery in my 06 G6 and had the same problem. the windows would not roll up or down how they did before. I read the answers on here and it does work. Hold up the window switch for ten seconds and it resets. You will have to do it to each window. Worked great. Thanks

Posted on Jan 18, 2010

dcramer531
  • 1654 Answers

SOURCE: Hello I need help locating the fuse/relay for my

The 2007 Pontiac G6 engine compartment fuse block is located on the driver's side of the engine compartment, near the battery. The wiring circuits in Pontiac G6 are protected from short circuits by a combination of fuses, circuit breakers and fusible links. This greatly reduces the chance of damage caused by electrical problems. Below diagram and table shows 2007 Pontiac G6 Engine Compartment Fuse Panel, Relay and the Circuit Protected.
pontiac-g6-engine-compartment-fuse-panel_thumb.png The fuse is in location 50

Posted on Nov 25, 2010

  • 175 Answers

SOURCE: how do you replace a turn signal lever on a 2006

1. remove steering column covers 2. disconnect electrical connector for switch 3. depress upper and lower locking tabs and remove switch
Note that you should disable the airbag system before attempting such a feat. 1. Point wheels straight 2. Disconnect negative battery terminal 3. Wait at least two minutes to allow backup power to deplete DO NOT USE 'MEMORY SAVERS'

Posted on Feb 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 honda accord drivers power seat stuck in the down position.


Could be defective adjustment switches rather than motor

Oct 10, 2016 | 2004 Honda Accord

1 Answer

Fix Pontiac g6 seats wont recline, the handles move up and down but the seat doesn't. It's stuck in the up right position.


I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
Best Manuals

Mar 07, 2016 | Pontiac Cars & Trucks

1 Answer

Power seat -drivers side


What ever it is you can't buy the parts anymore.

Mar 14, 2014 | Saturn Cars & Trucks

1 Answer

1990 Park Ave drivers seat recliner motor


You must remove the motor, move the seat to the desired position and then reinstall the motor to lock the seat in the position.

Sep 10, 2012 | Cars & Trucks

1 Answer

HONDA ACCORD Seats Front Assembly Recliner went down and won't go up


I wouldn't ruin anything by trying things yourself

I would have a dealer check it out

The dealer I used in the past, has a seat specialist come
in on Wed only, around 5:30 after the service bays close
& one service writer hangs out until that person fixes a
couple vehicles seat issues

Jun 12, 2012 | 1995 Honda Accord

3 Answers

Front seats recliners won't "click" in the upright position.


personally i would pull the seats and weld them into a position that is comfortable both sides of the seat should be welded. a small mig welder would take care of this issue nicely and permanently ! .. jay Florida

Nov 10, 2011 | 1986 Chevrolet Camaro

1 Answer

How do i remove the front seats of a 1998 Pontiac Grand Prix?


On W-Body vehicles, the front seats are secured to the floorpan by two front hook attachments and two rear bolts installed to nuts welded to the floorpan.
The manually operated two-way front adjusters provides only fore and aft movement of the seat. When the seat adjuster handle located on the front seat is pulled up, the seat adjusters unlock, permitting travel of the seat. When the seat is in the desired position and the seat adjuster handle is released, the seat locks in place.
A power operated six-way seat adjuster is available. The adjusters are activated by three 12 volt, reversible, permanent magnet motors with a built-in circuit breaker. The motors are energized by a switch bolted on the seat side panel.
The three motors drive the front seat and rear vertical actuators and a horizontal actuator. When the adjusters reach the limit of travel, torque is absorbed through the rubber mounted grommets located between the motor and the support. An overload relay is provided in the circuit and will open should excessive stall be applied.
The optional 60/40 split bench front seats have seat back head restraints on the driver's and passenger's seat back. The head restraints are designed so they cannot be removed from the seat back without first inserting a small rounded tool inside the head restraint support tube to release the locking tab. The 60/40 split bench seat is equipped with a reclining mechanism on both the driver's and passenger's side. The recliner lever is located on the outboard side of the spring cushion. When the lever is pulled upward, the spring loaded dual linear reclining unit located in the cushion frame is released, allowing the seat back to be pushed rearward or allowing the spring loaded reclining unit to bring the seat back forward.
Bucket seats are equipped with manual reclining mechanisms. An optional six-way power seat adjuster is available. Some bucket seats are equipped with inertia seat back locks. This system allows the seat back to fold forward without requiring the occupant to release a locking lever or access to the rear seat area. During a sudden stop or deceleration, or if the front of the vehicle is nose down, the inertia system of the seat back lock will engage, holding the seat back in its rest position. A release lever is provided to allow manual release of the seat back lock when the vehicle is in the nose down position. The release lever is located at the lower rear outboard corner of the seat back.
Some W-Body vehicles (notably Pontiac coupes) have passenger front seats equipped with an E-Z Entry device. This is actuated, in an unoccupied seat, by completely folding the seat back forward disengaging the adjuster, and sliding the front seat forward to gain access to the rear seat area. To return the seat to its normal position, return the seat back to its rest position, and slide the entire seat rearward, engaging the adjuster.
W-Body rear seats are available in several styles including a rear seat with an integral child restraint device.

Sep 01, 2009 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
2007 Pontiac G6 Logo

556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...