Question about 2005 Chrysler PT Cruiser

1 Answer

2005 chrysler pt non turbo p0031 p0037 changed asd relay still engine light on

Engine light on replaced sensors and relay

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Disconnect your battery and then reconnect it will reset It work for is

Posted on Mar 23, 2014

Testimonial: "done that for five min. and hit the brakes then put it all back together ,still the engine light come back on ,even used obd to erease the codes then started it and light came back on"

  • marcela
    marcela Mar 23, 2014

    Then maybe it's a different sensor that you need to replace

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 457 Answers

SOURCE: Check Engine light on and off - P0031 and P0037

the sensor heater circuits have to be diagnosed; you probably didn't need to replace them.

Posted on Mar 14, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0031 p0037 need see a video how to fix


P0037 HO2S Heater Control Circuit Low B1S2

https://www.obd-codes.com/p0031 Check for a fuse bing blown , Heater circuit shorted in O2 sensor blowing the fuse , maybe . You don't say what make , model an year vehicle an engine size .

Mar 28, 2017 | Cars & Trucks

1 Answer

How do i change the turbo motor and put a non turbo motor in a 2003 pt cruiser


Changing out an entire engine is no easy feat. The biggest difference you'll have is with the exhaust system. The non turbo engine connects differently.

Oct 01, 2014 | 2003 Chrysler PT Cruiser

2 Answers

All 4 O2 Sensors failed at the same time


Check the relays and fuses for the H.E.G.O (heated oxygen sensors) for power and function.

Nov 04, 2013 | 2004 Nissan Pathfinder

1 Answer

Check Engine light on and off - P0031 and P0037


the sensor heater circuits have to be diagnosed; you probably didn't need to replace them.

Mar 14, 2013 | 2005 Chrysler PT Cruiser

1 Answer

P0688 2005 pt


P0688 CHRYSLER - Auto Shutdown Relay Control Circuit Low
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
Possible causes - ASD relay circuit is open or shorted (replace this relay first)
- Failed Auto Shutdown relay
- Failed ECM (engine control computer)

Mar 22, 2012 | Chrysler PT Cruiser Cars & Trucks

1 Answer

2005 pt cruiser won't start won't crank, everything works


When you turn the key on the ASD relay should turn on the fuel pump and power the injector, Do this lets cheat the system go to the ASD rely open the cover expose the inside have some one turn the key on does the ASD make contact? If not turn the key on collpase the ASD so it make contact do you hear the fuel pump come on? Now try this just as how you iopen the ASD do the same to the starter relay. Put the car in gear e brake on someone in the vehicle in case the car start and you are in front of it and it runs you over so at least they step on the brakes. Key on ASD exposed as your collapse the starter relay does the ASD relay turn on? Here why if you can control all the relay from under the hood you will need a ignition switch (the eletrical part)

Feb 22, 2012 | 2005 Chrysler PT Cruiser

1 Answer

Whats the position of the crankshaft position sensor on 2005 pt cruiser non turbo


P0344 CHRYSLER - Camshaft Position Sensor Intermittent Interruption Bank 1 Sensor 1
Possible causes - Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Faulty starter motor
- Starting system circuit

Dec 14, 2011 | 2005 Chrysler PT Cruiser

1 Answer

'05 PT Cruiser O2 sensor problems.


I had a similar problem with my car. It turned out the O2 sensors were fine and the issue was a leak in the throttle body causing the engine to run lean. If you have an ODB2 scanner you can look at fuel trims, etc and will be able to tell.

Mar 28, 2010 | 2005 Chrysler PT Cruiser

1 Answer

I blew the turbo on my 2005 pt cruiser limited ed. I replaced the entire turbo,and added new sparks...(only has 52k miles) Since then my car does not get over 65mph without feeling like its stalling...


What kind of spark plugs did you use??? Here is a list of plugs that you can use on your Turbo engine.

Champion
* Copper - stock # 440 - RE14MCC5 (OEM)
* Copper - stock # 470 - RE14MCC5 (supercedes/replaces # 440, but some catalogs same part #)
* Copper - RE16MC (supercedes/replaces RE14MCC5 and new Chrysler recommended gap is .040)

NGK
* Copper - LZTR4A-11 (supercedes/replaces RE14MCC5 and new * Chrysler recommended gap is .040)
* Copper - stock # 4306 - LZTR5A-13 (one range colder)

If you use the platinum spark plugs used on the Non-turbo engine, they will start to glow and cause misfires and can cause engine damage to saver detonations throughout the RPM cycle.

As for the over heating, you could have a blown head gasket from a severer detonation if you notice coolant and oil mixing in your engine and coolant tank. The less cause for over heating wold be a bad thermostat or a faulty radiator cooling fan, cooling fan relay or cooling fuse which is located in the engine compartment fuse box by the battery.

Good luck and thank you for using Fixya.


Mar 17, 2010 | 2005 Chrysler PT Cruiser

1 Answer

I have installed a used engine in my 2002 PT Cruiser non-turbo. The engine was running properly before it was removed from the wreck, same year and model. Now it will not start. Through the codes in...


most chrysler products you have to re sync the cam and crank sensors using a scan tool such as Snap-on's modis. you may have to also have the cars computer specs re programmed for the replacement motor adn that can only be done at a dealership.

Sep 23, 2009 | 2004 Chrysler PT Cruiser

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...