Question about Volkswagen Jetta

1 Answer

I need to locate cylinder number 4 on my Jetta 2008 2.5 L.

The misfire is on cylinder number 4 and I want to change the ignition coil on this cylinder as well as all spark plugs

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Left to right....

Posted on Mar 24, 2014

  • craigbremner Mar 24, 2014

    Sorry, left to right as you look into engine compartment...so #4 on drivers side if in North America

  • craigbremner Mar 26, 2014

    Yup, read my next comment, I corrected it.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 373 Answers

SOURCE: 2001 hyundai santa fe 6

HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.

OK... I hope this solve your question .

THank you for use fixya.

Posted on Jul 25, 2008

  • 1 Answer

SOURCE: 99 cougar v6 P0352 misfire cylinder 3 and 4 replaced igntn coil..

Had the same problem, car was misfiring on cylinder 3 and 4. replaced wires, plugs, and ignition coil. still misfired on the same cynlinders. turned out the main engine wiring harness plug in was coming loose. spent well over $150 on the unneccesary repairs and ultimately fixed the problem wit a $3 bag of wire ties to hold the plug in...

Posted on Jun 01, 2009

ministock48
  • 258 Answers

SOURCE: Ignition coil pack on Ranger 1999 misfire on #3

replace coil

Posted on Oct 23, 2009

  • 110 Answers

SOURCE: i have a 99 grand am SE 2.4 4 cylinder and my

A misfire doesn't always have to be ignition... it's just the most common cause. Faulty or plugged injector, low compression. You need to check fuel pressure and test the fuel injector flow. Then check compression. If you don't have tools for these tests, take it to someone who does. Testing is much cheaper than throwing parts at the problem.

Posted on Feb 25, 2010

  • 289 Answers

SOURCE: Misfire on cylinder 4 only when accelerating

coil pack

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 ford fusion sel v6 is having cylinder misfiring problems the codes it reads out are p0171 p0304 p0305 p0306 and p0300


p0171 is fuel injection system too lean - bank 1
possible causes
- Intake air leaks - Faulty front heated oxygen sensor - Ignition misfiring - Faulty fuel injectors - Exhaust gas leaks - Incorrect fuel pressure - Lack of fuel - Faulty Mass Air Flow (MAF) sensor - Incorrect Positive Crankcase Ventilation (PCV) hose connection
p0304 is cylinder 4 misfire detected.
possible causes
Faulty spark plug 4 - Clogged or faulty fuel injector 4 - Faulty ignition coil 4 - Fuel injector 4 harness is open or shorted - Fuel injector 4 circuit poor electrical connection - Ignition coil 4 harness is open or shorted - Ignition coil 4 circuit poor electrical connection - Insufficient cylinder 4 compression - Incorrect fuel pressure - Intake air leak
p0305 is same as above but cylinder 5.
p0306 is same as above but cylinder 6.
p0300 is random misfire detected
possible cause
Faulty spark plug (s) - Faulty ignition coil (s) - Clogged or faulty fuel injector (s) - Intake air leak - Fuel injectors harness is open or shorted - Fuel Injectors circuit poor electrical connection - Ignition coils harness is open or shorted - Ignition coils circuit poor electrical connection - Insufficient cylinders compression - Incorrect fuel pressure

Oct 31, 2016 | 2006 Ford Fusion SEL

1 Answer

Misfire on Cylinder 3 swapped plugs between 3 and 4 on Pontiak Aztek 2003. Misfire remained on cylinder 3. Swapped ignition coil 3 and 6 with ignition coil 1 and 4 misfire still on cylinder 3


Try a new plug wire on cyl 3 if that doesn't fix it you could have a bad valve or compression problem on cyl 3 Try doing a compression test also If it has injectors for each cylinder you could have a bad injector for cylinder number 3

Dec 04, 2014 | 2001 Pontiac Aztek

1 Answer

Is there an erg valve on a honda accord 2008 4 cyl


code p0300 refers to--random/multiple cylinder/s misfire detected...Causes---spark plugs---HT leads---injectors---ignition coils ---low compression ---wiring
code p0302 refers to cylinder 2 misfire detected Causes ---engine mechanical fault---wiring---ignition/fuel system ---ECT/MAF sensors ECM
code po303 refers to cylinder 3 misfire detected Causes Engine mechanical fault---wiring---ignition/ fuel system ---injector---ECT/MAF sensor ECM The common fault to all is the fuel/system ignition
I would have the injectors checked and have a pressure test done on the fuel manifold to check pump and fuel regulator valve.

Apr 05, 2013 | 2008 Honda Accord

2 Answers

My 2001day Ford Escape XLT has check engine light on. The parts store pulled the codesand its a gear 3 ratio issue and a miss fire on first and second cyl. Could these two be related or does the gear ratio...


Gear ratio does point to an internal transmission issue. The misfires can easily be diagnosed by swapping thing around and seeing if the code follows. For example misfire in cylinder number 1 & 2 swap coils to cylinder number 3 & 4 and if the code changes from P0301(2) to P 0303(4) you know you need coils.

Feb 25, 2013 | Cars & Trucks

1 Answer

MAZDA CX-9 P0354 CODE


Cylinder 4. Each cylinder has it's own coil above the sparkplug.
If you have a misfire, it's probably a bad coil. But if it's an intermittent misfire, it may be the wiring to the coil. If it's intermittent, start the car and wiggle the wires to that coil. If you cause a misfire you need to check the wiring to the coil.
Goode luck.

Nov 29, 2011 | 2008 Mazda Cx 9

2 Answers

I have a 2008 dodge avenger se and my engine light is on and was flashing before. when it is in drive or park it turns off when i stop. i took it to auto zone and the told me that cylinder 3 and 4 misfire...


The best way to fault find in swap coil 1&2 with coil 3&4. If the fault doesn't change, it is possibly the plugs or something more sinister electrically.

Sep 18, 2017 | 2008 Dodge Avenger

1 Answer

2003 mercedes Benz C240 codes P0300, P0301, P0302 and P0303. Please, help me how to fix?.


P0300 Random Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0302 Cylinder 2 Misfire Detected
P0303 Cylinder 3 Misfire Detected
according to this fault codes first mark ignition coils
3 ---------------- 6
2 ---------------- 5
1 ---------------- 4
RB-------------LB
this right banks and left bank, please remove Ignition coils with lids and spark plugs from right bank and swap with left bank, if fault code change as
P 0304 Cylinder 4 Misfire Detected
P 0305 Cylinder 5 Misfire Detected
P 0306 Cylinder 6 Misfire Detected
You can Identify it's a faulty ignition system then next swap ignition lids from ignition coils be careful each coils have two lids one short and other long bit deference and when you remove and fix it to the car keep in mind correct order because each coil two different fire for two spark plugs don't mix up, if you mix it can create the fault code.if you detect any fault ignition coils or spark plugs or lids replace that and also whether god or bad recommend to replace spark plugs, find the right that's most important thing, if this way couldn't found the any ignition fault next step is check fuel presser, when the engine running fuel presser must be around 4.5 bar without engine running must be 4 to 6 bar if the fuel presser too low need to check two different things one is fuel pump other is fuel injectors, in this case you can swap injectors from right bank to left bank and find is the injectors leaking, if not leaking faulty fuel pump.is this information helped you? if yes please leave a comment,

Oct 15, 2010 | 2007 Mercedes-Benz C230 Sedan

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

1 Answer

My 96 jetta has had the same codes for 4 years...help me!!!!


need to know which motor u have, bet its a 2 litre. Get back to me on this, but could likely be the pick up coil which is located in the distributor if it is indeed a 2 litre engine. Maybe mass air flow as well.

Aug 15, 2008 | 1996 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77514 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...