Question about 1986 Ford F150 SuperCab

1 Answer

IGNITOIN SWITCH LOST IGNITION KEY HOW TO RAND R SWITCH

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 884 Answers

That switch is designed to be removed in the "ON" position. If you don't have a working key, you have a big problem and you are going to need a locksmith to drill out the retainer pin to get it out.

Posted on Jan 02, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drilled out my ignition cause I lost my key I now found the key and it won't turn need help asap


you damaged the ignition switch and it will not recognize key you have to replace the tumbler and ignition switch the key acts like an electronic switch in most modern vehicles put key in and its recolonized and will turn and start vehicle ---damage to key or tumbler sets off anti theft and you have no start ---in future dont try to hot wire or pop ignition when keys are lost (thats all hollywood) go to dealer with vin and proof of ownership and they can cut you a new key

Aug 28, 2015 | Cars & Trucks

1 Answer

How can I hot wire my ford Taurus? I lost my key


Problem with hot wiring the ignition is that the vehicle will start and run but with out turning the ignition the steering wheel will be locked > I suggest a new ignition switch , you can always hammer a flat head screw driver in the ignition were the key goes and turn the ignition. Either way you will need a new ignition switch .

Apr 03, 2015 | 1994 Ford Taurus

1 Answer

Lost my remote on my 02 jeep liberty and need to


the key fob? or radio remove or what?
remote to what.

the operators manual covers this , under car keys.
the car came with 2 Fobs. lost them both now>?
RKE its called, (makes looking fact more easy)
is this car with SKIS Immoblizer option> yes./no
if yes.
SENTRY KEY IMMOBILIZER SYSTEM - IF
EQUIPPED
im reading your operators guide now.
lost that too>?
Duplication of keys may
be performed at an authorized dealer (or locksmiths) or by using the
Customer Key Programming procedure.

DIY, takes 1 key , good, called a valid key, in the below text.
You can program new keys to the system if you have two
valid keys by doing the following:
1. Cut the additional Sentry Key Transponder blank(s) to
match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and
turn the ignition switch ON for at least 3 seconds but no
longer than 15 seconds. Turn the ignition switch OFF and
remove the first key.
3. Insert the second valid key and turn the ignition
switch ON within 15 seconds. After ten seconds, a chime
will sound and the SKIS indicator light will begin to
flash. Turn the ignition switch OFF and remove the
second key.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 seconds. After 10
seconds, a single chime will sound. The SKIS indicator
light will stop flashing, turn on for 3 seconds; then turn
off.
The new Sentry Key has been programmed. Repeat this
process to program up to a total of 8 keys.


did i guess right, the Key FOB RKE,
remove key entry fob.?

Sep 18, 2014 | 2002 Jeep Liberty

1 Answer

Lost key and alarm dodge caravan


to reprogram new key first you need to use 2 factory program keys.place first factory key in the ignition first turn ignition on for 3 seconds. then turn off ignition then install second factory in the ignition on position for 10 seconds.when immobilizer warning lamp begins to flash a acoustic signal is emitted.within 60 seconds. switch ignition off and remove key.then insert new key and switch on for 10 seconds a acoustic signal is emitted and immobilizer warning lamp remain illuminated for 3 seconds indicating programming completed.if all fails dealership has to reprogram new keys.

Dec 17, 2012 | 2000 Dodge Caravan

1 Answer

Driving down the road it throws a engine code and starts sputering and missing


Sounds like engine miss fire! Check to make sure your whole ignition unit is fine... examples....distributor, spark plugs, plug wires, ignition rotor, ignitoin coil...

Feb 18, 2011 | 1991 Honda Civic

1 Answer

Ignitoin locking when key turning


you can try putting graphite powder into the lock,put it on the edge of the key & push it in & out of the lock you might have to repeat this several times to get enough in,don't use WD 40 or the like as this collects dust & makes things worse,it this does'nt work maybe the switch might have to be replaced as it maybe broken inside.........hope this helps......cheers

Aug 06, 2010 | 2004 Chevrolet Cavalier

1 Answer

Ignition switch for diesel engine. Lost key


if u notify dealer with vin number they should be able to cut u a new key --if ur key had a electronic chip in it still would need to notify dealer ----if u want to replace ignition switch the switch runs about $130 if electronic more -then u need to add on the price of installing it $65-75 an hour labor cost-- some not many lock- smiths do automotive ignition keys [non electronic ] from vin number

Feb 25, 2010 | 2004 Volkswagen Touareg

1 Answer

NO POWER TO STARTER SILENOID


try your silenoid switch on your starter

Dec 31, 2008 | 1995 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...