Question about 2005 Suzuki Swift
Hi there Im looking at putting a M13A into off road race car, what are the most common faults with these engines? tossing up whether to go for one of these or a Mitsi Colt mivec engine, Has to be 1300 for my racing class, any advive would be awesome
IF the suzy engine has variable valve control V VT or mivec or what ever it is for a suzy It will be a toss up but for my money I would pick the mitsi engine as they have been developed for off road racing
Posted on Mar 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I cant say I have ever even seen one of these, but lets start with this; Most vehicles can tolerate quite a lot of moisture (driving in heavy rain) but when it is 'flooded' with water, even garden hose pressure, that water is going to get into places it shouldn't. Your mechanic may may be going down the right path but try this first; remove spark plugs and replace if they have 50k or more miles or any are dark brown to black on the porcelain around center electrode. When you gain access to them and after turning them out about 1.5 turns, blow out water and/or dirt from around them with compressed air, this keeps it from entering plug hole. While you are using air, blow out spark plug wires/boots on both ends. As I first said, I am not familiar with this engine at all so I am not sure if you have a single coil or multiple coils. Blow out any water in any connections to these if possible. Replace boots/plug wires if they show any sign of arcing/excess wear (cracks,tears,brittle,torn) or more than 50k miles.When reassembling use a good quality dielectic silicone grease To help 'weatherproof' them.Make sure you did not damage or dislodge any other hoses/tubing/ect.. when cleaning.Hopethis helps! Please rate me. Thanks!
Posted on Jan 21, 2009
SOURCE: 2002 Grand Vitara engine light
Try these easy things...take off clean and reconnect the battery cables, take to Auto Zone for a FREE computer hook up. More than likely if the battery hook up doesn't work it's the oxygen sensor.
Posted on Jun 29, 2009
SOURCE: valve timing check
Chain drive. Unless the engine's been apart, why would the cam/valve timing change?
Valve clearances are another matter, and unless you want to remove the camshafts, get a mechanic who has the proper Suzuki tool to do them for you. You can measure the clearances, but the shims are between the cam lobe and the valve bucket, and the special tool holds the bucket down whilst changing to a thicker or thinner shim.
Posted on Sep 21, 2009
SOURCE: I have just replaced the crankshaft bearings on my Suzuki Jimny M13A and found out that when I start the engine it will not stay idle. I disconnected the sensor in front of the camshaft and it stays i
dude your electronic ignition system has gone bust... you will have to replace the engine mapping chip, but good luck finding it... I tried to no avail.
Tell me if you get it though.. Goodluck :)
Posted on Jan 22, 2010
Tips for a great answer:
Oct 17, 2016 | Holden Cars & Trucks
Feb 26, 2015 | 2005 Suzuki Swift
Jul 18, 2014 | 1991 Cadillac Allante
Jun 04, 2017 | 2006 Ford Mondeo 1.8
Mar 28, 2014 | 2001 Suzuki Swift
Feb 01, 2014 | 2006 Suzuki Swift
May 08, 2017 | 1992 GMC Suburban
181 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: