Question about Isuzu Cars & Trucks

Open Question

Isuzu dir-4800 touch screen calibration

Need to calibrate touch screen

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mhamlin63
  • 138 Answers

SOURCE: calibrating my spark plugs on my 2001 bmw 325i NEED HELP PLEASE

If you have owners manual it will be in there. If not call local auto parts supplier or performance shop. They'll give you the gap and go ahead and set gap using a gapping tool.($5) at auto parts place.

Posted on Jun 30, 2009

Ad
  • 333 Answers

SOURCE: yes I need te calibration (gap) for this auto

NGK BKR5E-11
DENSO K16PR-U11
CHAMPION RC10YC4
Gap 0.039 - 0.043 in (1.0 - 1.1 mm)
Torque 15 - 20 ft.lb

Posted on Sep 25, 2009

Testimonial: "Hey Superbovine thanjs so much for all you help a was great because the auto parts stores doenst have this info........ THANKS AGAIN"

simontricket
  • 235 Answers

SOURCE: 02 isuzu trooper

Need a bit more information to go on as there is no injector pump on a 4JX1 its a rail type engine .
You can get flash codes to come up on the engine check light from the OBDII socket by connecting pin 4 to pin 6 and turning the key to ign on . the light will flash - count the flashes gonna be something like 4 then 3 and maybe some other depends on how many faults you got.

If you get none then try my tips .

Posted on Dec 25, 2009

  • 64 Answers

SOURCE: valve calibration for Toyota Corolla 84

If it is a gts,they do not need calibration. The engine 4ac is: intake-.008 in. and exhaust-.012 in.

Posted on Feb 18, 2010

emissionwiz
  • 76846 Answers

SOURCE: Calibration procedure

You have this in the wrong product category, this is Cars and Trucks. Please repost so the correct expert sees it.

Posted on Feb 16, 2012

Testimonial: "Thanks Dennis, I'm still learning my way around FixYa but I still need Fixin!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 saturn aura hard steering I was told that the steering motor moduel was bad so I replaced it still hard to steere what could it be


Who told you , was it checked for DTC'S - diagnostic trouble codes ? Rather then just replacing parts why don't you take it to a qualified repair shop . Besides , the new module need's Programming and Setup , and a factory scan tool to do it .
Steering Position Sensor Calibration
Install the scan tool.
Turn ON the ignition, with the engine OFF.
Center the steering wheel.
With the scan tool select Special Functions.
Select Steering Position Sensor Calibration and press the Enter key. The scan tool screen will flash Calibration in Progress then display Calibration Complete.
Press the exit key.
Use the scan tool in order to clear any EPS DTCs.

Dec 13, 2016 | 2009 Saturn Aura

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????


CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).
  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Oct 02, 2016 | 2007 Chevrolet Impala

1 Answer

2012 caravan blows cold air out the left side and hot air out the riht a/c is on. anyone help?


Hi Dwain, I'm glad to help. The cold air on one side and hot air on the other is usually a broken A/C door or a bad Actuator Motor. Here's something to try, BUT if it doesn't work then the dask will need to come out of the vehicle and remove the A/C Housing to see what has happened. Lets try this first, just in case its only out of calibration. Unhook your battery negative cable for 20 seconds then replace it. Make sure the Blower is on high. The vents are on panel air and its in the fully cold position. Then start the car and it should automatically go into calibration mode. CAUTION: DO NOT TOUCH the controls until it has went through all the calibration and has returned to the panel mode. Hope this helps and have an awesome day Dwain

Apr 21, 2014 | Dodge Grand Caravan Cars & Trucks

1 Answer

2004 GMC Envoy thermostat replaced and now the dash vents are not working


When thermostat was replaced, the battery was probably disconnected and that caused the HVAC system to lose its calibration. To initiate the calibration properly, first set all HVAC controls to their OFF or CCW positions. Then disconnect the battery for about a 2 - 3 minutes, then reconnect. Do not touch any of the controls for about 2 minutes. If this does not fix the vent problem, you probably have a bad or stuck actuator, or a stuck vent door.

Sep 01, 2012 | 2004 GMC Envoy

1 Answer

Radio stations


There is a radio option to recalibrate your touch screen. Please press the following three hard keys simultaneously RADIO/MEDIA, SEEK UP, NAV (AUDIO on REN). Once you begin to recalibrate the touch screen you must finish. Audio confirmation prompts are provided for each of the three points of calibration, one beep for the first, two for the second and three for the third. The calibration needs to be precise as possible and a PDA stylus would be recommended. The MyGIG radio requires the user to repress each calibration point to confirm the calibration process. A green crosshair indicates proper calibration.You must not start with the "+" but with the "+1", then goto "+2" and last to "+". Repeat this until all crosses are green and exit with pushing the menue or any other key. Done

Jul 20, 2012 | 2008 Dodge Grand Caravan

1 Answer

I changed the battery on a 2002 trail blazer then the a/c wont work


When the battery was disconnected, the HVAC system lost its calibration or one of the door actuators is stuck. With truck on, set all HVAC controls and switches to their OFF or CCW positions. Disconnect the battery, wait about 3 minutes, then reconnect. Turn ignition to ON position, doesn't need to be started, and don't touch any of the HVAC controls for about 3 minutes. This should reset the calibration. If this does not work, a mechanic will need to diagnose the problem.

Jun 21, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

I need to replace my iac valve/sensor on my 2001 ford escape v6. where will i find it hiding?


Why replacing? Codes/ Check Engine Light on?

adobe.gif Printable View (263 KB) TSB
06-11-7
  • 2001-2005 ESCAPE 3.0L UNSTABLE IDLE - 2001-2003 ESCAPE 3.0L AUTOMATIC TRANSAXLE SHUDDER - MEXICO ONLY
Publication Date: May 25, 2006
FORD: 2001-2005 Escape
ISSUE: Some 2001-2005 Escape vehicles equipped with a 3.0L engine may exhibit idle speeds outside the specified range. Some 2001-2003 Escape vehicles equipped with a 3.0L engine and CD4E automatic transaxle may exhibit a transmission shudder.
ACTION: Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
  1. If the concern is a 2001-2005 Escape with idle speeds outside the specified range:
    1. Install a new idle air control (IAC) valve with jumper harness included in the kit. The new Denso brand IAC will be installed with the electrical connector facing the opposite direction of the original (Hitachi) valve which is why the jumper harness is required. The original (Hitachi) IAC connector faces the front of the vehicle while the new Denso IAC connector faces toward the rear of the vehicle.
    2. Referring to the calibration charts (Figures 1 and 2), select the applicable file and reprogram the powertrain control module (PCM) using the TSB Service Procedure and WDS/IDS release B40.5 and higher. Calibration files may also be obtained at www.motorcraft.com.
  2. If the concern is a 2001 - 2003 Escape with transaxle shudder, drain, flush and refill the transmission fluid with MERCON® Multi-Purpose Automatic Transmission Fluid. Then, referring to the calibration charts (Figures 1 and 2), select the applicable file and reprogram the PCM using the TSB Service Procedure and WDS/IDS release B40.5 and higher. Calibration files may also be obtained at www.motorcraft.com.
  3. When reprogramming the PCM use blank path programming. Select the proper file from the chart and manually enter the PCM part number or tear tag number to obtain the updated calibration file.
To Perform Blank Path Programming:
  1. Connect WDS/IDS to vehicle.
  2. Select "16 pin", select "All others, except those below", press TICK.
  3. Screen shows installation of cable, press TICK.
  4. Screen shows to turn ignition ON. DO NOT TURN IGNITION ON. Press TICK.
  5. Screen shows progress bar, then screen tells you "No communication can be established with the PCM" and asks you if you want to retry? Select "NO". With the ignition key still OFF, press TICK.
  6. Screen shows to turn ignition ON. Keep ignition in the "OFF" position, press TICK and you will be asked to cycle the key "ON" and "OFF" a few times. Please keep the key position in the "OFF" position through the key cycles.
  7. Screen will show "The diagnostic tester is unable to communicate with this vehicle." You will be prompted to "select a vehicle from the vehicle list", press TICK.
  8. A list of vehicles will be displayed, select ALL OTHERS, and press TICK.
  9. Screen shows "To enable WDS to reprogram the PCM with the correct calibration", enter one of the following: Vehicle Calibration number (7 digits), Tear Tag number (4 digits), or PCM part number, press TICK.
  10. Highlight the box next to the selection chosen, and enter ONLY ONE of the selections listed above. Press TICK.
  11. Follow and answer correctly all remaining screens. Once PCM is reprogrammed communication should be reestablished and PATS system can be reset (if necessary) per Workshop Manual, Section 419-01.

PART NUMBER PART NAME 5L8Z-9F715-AA Idle Air Control Valve XT-2-QDX MERCON® Multi-Purpose Automatic Transmission Fluid
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
DEALER CODING BASIC PART NO. CONDITION CODE 9F715 42

tb8487b.gif
Figure 1 - Article 06-11-7



tb8488b.gif

Sep 07, 2011 | 2001 Ford Escape

1 Answer

How do you check fuel pump pressure on a 1991 ford 150


You will need the assistance of a pump service clinic because the calibration and test can be made only with the right equipment.
So get in touch with the service dealer of your Pump.

Sep 26, 2010 | 1991 Ford F150

1 Answer

Compass calibration


im taking an educated guess- ive done it maybe once or twice in a chrysler- try to go into the MENU by hitting the buttons for menu and reset. if u luck out it will say something like calibrate or calibrate compass on the screen. now it will either tell u what to do or if not drive carefully in a small circle slowly clockwise and then counterclockwise several times. as youre doing this it might suddenly pop up "calibration complete" or something similar. i almost forgot- IF U HAVE THE OWNERS MANUAL ,LOOK IN THERE 1ST. if not try what i said.

Aug 09, 2009 | 1991 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...