Question about 2004 Infiniti QX56

Open Question

Removing instrument cluster 2004 Infinity QX56

Need to remove instrument cluster from a 2004 infinity QX 56

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
hiseyj
  • 99 Answers

SOURCE: trunk won't open on 2004 infinity i35

Have you checked the trunk switch in the glove compartment to make sure it is on? Just a thought.

To remove the rear seats: there are two tabs for the rear seat bottom one on the left and one on the right, look at the front bottom of the seat cushion. Pull the tabs and lift up on the seat it should come out easily. Once the seat bottom is out you will have access to the mounting hardware for the seat back. Good Luck.

Posted on Nov 26, 2008

Ad
  • 1 Answer

SOURCE: INFINITY G35 FUSE DIAGRAM

there is an ipd/m fuse box behind the battery of my 2004 infiniti g35 sedan. I blew a fuse and couldn't find it. So remove the plastic panel that is right next to the windshield washers when the hood is open. You'll see an entirely new fuse box. So all in all, there are three fuse boxes... one by your feet on the driver's side, one in front of the battery, and one behind the battery. hope it helps

Posted on Feb 18, 2009

pingman37
  • 58 Answers

SOURCE: 2005 INFINITY QX56

There is an info button. Press that button repeatedly until you get to maintenence. Once there, use the directional knob and toggle down to oil and press ok, from there it should either give you a reset tab to highlight and press ok, or highlight the mileage bar and toggle left until it is back at 0. If you have any trouble let me know and I will walk you through it. 

Posted on May 27, 2009

  • 8 Answers

SOURCE: need to remove headlight 2003 infinity g35 sedan

yes ballast is on the bottom of the headlight capsule. remove and note 4 torx heads

Posted on Nov 17, 2009

  • 2187 Answers

SOURCE: I have water in the headlight of my 05 Infiniti QX56

at times the water in the headlight may not be related to it not working. Check the socket for the light. Check the wiring and the relay for loose connections or exposed wiring. Water may enter exposed wires causing it to fail. Check also the rubber seals. It may have corroded due to heat. See if you can have silicon seal any opening on the glass part of the headlamp.

Posted on May 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Infinity QX-56 and it shakes terribly when I apply the brakes when driving at highway speeds. It also feels like the suspension is bad when you go over a bump or hit a pot-hole.


Warped brake rotor usually cause high vibration at high speeds. But you can also feel it at lower speeds. But bad ball joints and tie rod end will cause vibration at high speeds. Ball joints will pop at pot holes, sometimes. Tie rods can be felt in the steering wheel at a stop. Move the wheel slightly to the left and right, you can feel/hear a tap as you turn it.

Nov 28, 2015 | 2008 Infiniti QX56

1 Answer

2004 QX56 How to change instrument cluster light bulbs


I can not give you details, but your probably going to have to find the screws/panel fasteners and take the instrument cluster off. This may require removing the entire dash piece over the cluster.

Launch diagnostic

Oct 11, 2013 | Cars & Trucks

1 Answer

I have infiniti QX 56 but the CD will not eject. When I push CD, it tells me to


This worked for my,Turn the key to the on position them disconect the battery fir 5 mint them put it all back together hope it works for you

Oct 24, 2012 | 2005 Infiniti QX56

1 Answer

How many fuse box does a 2004 nissan infinity QX56 has


There is an Intelligent Power Distribution Module (IPDM), a Fuse & Relay Box, a Fusible Link Box, and a Fuse & Fusible Link Box, all of which are located at the right side of the engine compartment.
Then there is the Instrument Panel Junction Block, which is located behind the driver's side kick panel.

Feb 11, 2012 | 2004 Infiniti QX56

1 Answer

Heavy snow sliding off my vehicleroof may have damaged the linkage of the front wipers. Passengerside wiper does not wipe-driverside works. How can I get acess to the linkage to find the problem ? 2005...


Please check if the wiper arm of the driver side that fits into the knurlings have worn out due to the fact that snow would have exerted pressure on the wiper arm. You need to remove the wiper blade assembly and see if the knurlings have tapered off. If so remove and tighten the fittings as this might be moving freely.
If the arms are moved it must be move up and down which can indicate either that links are damaged or jumped off the joints.

Apr 15, 2011 | 2011 Infiniti QX56

2 Answers

2005 qx 56 rpm gage dont work


Try to reboot. Unplug battery and reconnect. See if reset works? Good luck. Mine is jacked also.

Jan 18, 2011 | 2005 Infiniti QX56

1 Answer

I have an 2005 infinity qx 56 that all of a sudden won't start. When you start it it's making clicking sound but won't start, i think is the fuel pump but how can i find out?


if it is only clicking it is either your battery or starter. It would still turn over if it was fuel pump, it just wouldn't start.

Dec 21, 2010 | 2005 Infiniti QX56

2 Answers

I have water in the headlight of my 05 Infiniti QX56


at times the water in the headlight may not be related to it not working. Check the socket for the light. Check the wiring and the relay for loose connections or exposed wiring. Water may enter exposed wires causing it to fail. Check also the rubber seals. It may have corroded due to heat. See if you can have silicon seal any opening on the glass part of the headlamp.

May 12, 2010 | 2004 Infiniti QX56

Not finding what you are looking for?
2004 Infiniti QX56 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...