Question about 1994 Chevrolet C1500

2 Answers

4l60e screwd my 94 suburban runs great till 3rd.oh ya i havent seen 3rd in 6 months.now 1600$ later im broke and still no 3rd what do i do? can i put a 350 turbo in it and say byby to the cursed elect trany.HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

Have your truck scanned, there's a reason why the transmission is not going past 2nd gear. The 4L60E is one of the most popular transmission out there and reliable. There are small and inexpensive modification you can have done to your needs. The4L60E has been used in light to medium trucks to light cars to high performance cars. You could have a TPS sensor and pressure sensor or PCM problems. There's just to many thing that can keep your transmission form shifting. Have it scanned at Auto Zone since it's free of charge and hope there is a DTC code. Good luck and keep me posted, be glad to help.

Posted on Jun 14, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

What cost $1,600, did you replace, rebuild or what.

From 1993 Suburban and up the transmission is computer shifted. If replacing or rebuilding the transmission did not fix the problem I would suggest you check the wiring and replace the computer.

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fireing order on a 99 chevy suburban 2500 7.4l


Chevy 5.0-5.7-7.4 all the same 1-8-4-3-6-5-7-2

Sep 20, 2014 | 1999 Chevrolet Suburban

1 Answer

1997 Chevrolet Suburban Check engine light soon is on


a Scan Tool will read your codes. even if the light is off it puts codes in history so they still can be pulled up for diagnostics. I would start there, You can get it done for free at AutoZone,CarQuest etc.

Jan 08, 2012 | Cars & Trucks

2 Answers

My suburban with 4l60e wont shift out of 2nd gear. when you put it in drive, it does fine til time to go into 3rd. it seems to just go into neutral, letting the rpms fly so i just put it in 2nd gear and...


The check engine light should be on. With a scanner pull the transmission control codes. and follow up on their leads speed sensers ( thiers 3 and shift soliods ( thiers 4) the connectors and the wires and more likly to be a problem than hard parts as this transmission is thris on up shifteed sllectonically

May 09, 2011 | 1999 GMC Suburban

2 Answers

I replaced the cap, rotor, plugs, wires, o2 sensor and cats, on my 96 suburban. the truck is running very strong. havent seen power from it like this in years. I ran a can of seafoam in the gas tank to try...


Mine was doing the exact same thing. You will need to crank it up, raise the hood, take the oil cap off, place your hand over the hole, and if it sucks on your hand you have a blowed intake gasket.

Jan 25, 2011 | 1996 Chevrolet Suburban

1 Answer

I have a 99 K1500 Suburban with a weak 4l60e trans. I have a 97 Suburban 4l60e trans available. Will they interchange?


yes. 96-99 are the same. 95 are different. 94-88 are the same. thats the most i can tell you off the top of my head. As long as the trannis are the same type they'll fit. For example a 700r4 from an 86 will fit into a 88 with a minor adjustment. But an 86 700r4 will not fit into a 86 that had a TH-400 without major changes. So as long as they're both 4L60E within the years mentioned above they'll interchange just fine.

Jun 06, 2010 | Chevrolet Suburban 1500 Cars & Trucks

3 Answers

4L60E Shifts fine in 1st, 2nd, & 3rd but will not shift into OD


check fluid conditon and level, may be a faulty soleniod

Apr 24, 2009 | 1994 Chevrolet C1500

2 Answers

Chevy transmission hangs in 2nd,


It just holds 2nd forever. Is the 1-2 shift point high?

Mar 24, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Replacing a 4L60E with a 700R4?


Not with good results, the 4L60E is run by your ecm, the 700R4 while looking close to the same does not relie on your ecm for commands,it relies on a cable to regulate your line pressure.

Jan 01, 2009 | 1994 Chevrolet K1500

3 Answers

Electric transmission


Hi. I have a '93 Chevy Suburban that is on the 3rd transmission. What you probably have is the earlier 700R4 transmission. What you should have is the 4L60E. I have done ALOT of research on these transmissions, and what I've found out is this: the 4L60E is essentially the same as the 700R4, with the exception that the 4L60E is completely controlled by the vehicle's computer. The 700R4 uses a more antiquated valve body with a TV (throttle valve) cable. In theory, you could use the 700R4 if you connect the TV cable and properly adjust it. If it's a 4X4, your speed sensor is in the transfer case, so that wouldn't be an issue. The 4L60E used in '93 and '94 will only work in those model year vehicles, because of the type of shift solenoids used. The newer units used pulse width modulation solenoids, as opposed to the older on/off solenoids. I have run my truck with the transmission unplugged and the engine still runs fine. The major problem with using the earlier 700R4as opposed to the correct 4L60E, would be emissions compliance. If you want to discuss this further, email me at big.bad.bones@hotmail.com

Oct 27, 2008 | 1993 GMC Sierra

2 Answers

1994 chevy c1500 replaced trans line it was very low on fluid and will not shiftintothird


im affraid so last resort put a tick aditif in the trany dont expect miracle thank you pierre

Jun 28, 2008 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...